Your cart is empty.
Your cart is empty.The LEED Brakes Bandit series vacuum pump provides an efficient, quiet and vibration free solution for your brake vacuum assist needs. The LEED Brakes vacuum pump used in our kit is a Rotary Vane style pump which is 60% quieter than the noisy Piston Style pumps on the market today. The Bandit series vacuum pump is also 30% more efficient giving you the required vacuum in less time which extends the life of the pump and makes your ride much more enjoyable. Each brake vacuum booster is pre-wired and tested on the assembly line to assure a trouble-free and easy installation. Installation is a breeze with a 2-wire power hookup and base-plate mounting template. The Black Bandit vacuum pumps are concealed in a Patent Pending Black canister. With the Black Bandit and Chrome Bandit you do have the option to remove the pump assembly as one unit from the canister turning it into a Naked Bandit to be mounted in most tight spaces. If you're tired of a rock hard power brake pedal or you simply want a quieter solution with an easy installation give the LEED Brakes Bandit Vacuum Pump a try today. Check Out this article on our Bandit Series Electric Vacuum Pumps by Hotrod Network, New, Quiet Vacuum Pump by Leed Brakes Gets Our Attention.
Mark V.
2025-07-14 18:07:02
The media could not be loaded.
Leo G. Delperdang
2025-06-16 10:09:34
Due to an after-market cam in a 440 Chrysler engine, did not have sufficient vacuum to operate OEM Brake Booster. Engine provided around 8 inches of vacuum at idle. Brake Booster required minimum 18 inches of vacuum. Wiring pump was easy. I used a relay to keep electrical load on vehicle fuse box to a minimum. Pump included wire and hose to connect into OEM Brake Booster. Overall easy install. Pump provided a little over 21 inches of vacuum. Booster worked fine. Would recommend.
Kyle killips
2025-05-08 17:21:48
I'm very happy with this unit , I looked at some cheaper units and I was concerned about how much noise it was going to make . I mounted this to the core support of my 1969 GTO using the supplied hardware, but added a 1/4" thick sheet of rubber between the bracket and my core support. My brand new power disc brakes were not getting enough vacuum from the intake due to a large cam , this unit solved that and my brakes work awesome. Installation was easy , nothing a novice couldn't handle. Very happy Pontiac guy now .
robert
2025-04-22 14:02:37
Bought this kit because my LS only produces 9in of vacuum with the cam that is in it. It works about 80 percent of the time, the rest of the time I have zero brake boost. I checked the vacuum and realized the switch was only switching on when vacuum dropped to 10in, I called leed and they sent a new vacuum switch out. 2 days later, switch is bad again. I have almost been in several accidents because of this electric vacuum switch, after much more research I found out that the switch they use is absolute junk. Same as the Dacray switch they sell on amazon. The pump was very quiet compared to my last vacuum pump which is great, but not so great when I have no brakes in a high horsepower car. I even installed a vacuum canister in hopes that would help, which it did slightly. For the price this thing should work flawlessly. I am now buying a hydro boost set up, which I should have done in the first place. Don't waste the money, just go with the hydro boost. Don't say you weren't warned.
Paul Yee
2025-04-18 09:50:19
Sounds a lot better than the aquarium pump sounding unit that I used to have.
terrylmorris55123
2025-04-06 12:04:13
This vacuum pump works as advertised!
Tom Guy
2024-12-25 13:16:18
Nice compact pre-wired unit takes the guess work out of installing. Although I didn't have the room I wished it could look more like a vacuum canister.It's cost more than others but it's only required power and ground.For me I wished I waited on the purchase, although it did provide the required vacuum for my break booster I later found the problem causing the low vacuum after installing the pump. Live and learn.
Toyota Guy
2024-12-12 20:42:46
I used this pump for my sbc 383 that has no vacuum at idle. This is not completely silent, but when the vehicle is running it is very faint. If I mounted it further away from the firewall I am sure it would not be audible at all. So far it is fantastic, only runs for a few seconds when needed. I had a vacuum canister alone before, but would never build enough vacuum. Brakes are just like a new car now.
Recommended Products
