Shopping Cart

Your cart is empty.

Your cart is empty.

LiTime 30 Amp MPPT 12V/24V/Auto DC Input Solar Charge Controller Build-in Bluetooth Module, Parameter Adjustable LCD Display LED Indicators Solar Panel

Free shipping on orders over $29.99

$99.99

$ 44 .99 $44.99

In Stock

1.Style:24v 30a Mppt Bluetooth


About this item

  • 99% Tracking Technology: LiTime 30A MPPT Solar Charge Controller with advanced Maximum Power Point Tracking technology can continuously track array’s maximum power point so as to get the maximum amount of power to charge the battery. The tracking efficiency is not less than 99% and peak conversion efficiency is up to 98%.
  • Bluetooth Function: LiTime 12V/24V MPPT Controller equipped with a built-in Bluetooth module, customers do not need to purchase another Bluetooth module, which can achieve remote control and display usage information.
  • LCD Screen & LED Indicators: LiTime MPPT controller comes equipped with an LCD screen to display the system operation information and 4 buttons to operate in the menus. Plus, multiple LED indicators will help to indicate the state of the solar panel array, battery, loads, controller.
  • Excellent Heat Dissipation & Multiple Protections: LiTime MPPT controller is made of die-cast aluminum, which ensures excellent heat dissipation to reduce the power loss. In addition, the multiple protections built in the solar charge controller can ensure that the controller is completely protected from Reverse Connection, Overpower, Overvoltage, Short-circuit, Over-temperature.
  • Applicable to LiFePO4, Lead-acid Battery: LiTime 12V/24V 30A MPPT Solar Charge Controller with LiFePO4 Battery Charging Mode, making it easy operation to charge LiFePO4. But it’s also compatible for Sealed, Gel Lead-acid batteries by adjusting the parameter.
  • Additional Components: The copper wire connector equipped in the accessory can increase the contact area between the wire and MPPT during installation, increasing the ability to transmit current.



Product Description

LITIME MPPT SOLAR CHARGE CONTROLLER

MPPT

5 FOLD PROTECTION - PROTECTS YOU FROM EVERYTHING

24V 30A MPPT

THE BEST SERVICE-MAKE YOUR LIFE BETTER

24-Hour Prompt Response
10+ Years' Expertise in RV, Off-Grid Power Solutions
12v50ah
Local Warehouses in the US

PRODUCT SPECIFICATION

System Voltage 12V/24V/Auto
Max. Solar Panel Input Power 450W for 12V/ 900W for 24V
Rated Charging Current 30A
Battery Voltage 9V to 32V
Dimension L9.65*W7.09*H3.25 inch (L245* W180* H82.5 mm)
Protection Degree / Altitude IP32 / 3000m
Default Battery Setting 12V LI (Lithium Iron Phosphate) Battery
Max. Solar Input Voltage 100V
Rated Load Current 20A
Communication Method RS485(RJ12) / Inbuilt BT
Weight 4.41lb / 2kg
Max. Applicable Wire 8 AWG

lawrence clare
2025-07-23 10:57:33
This controller was so easy to set up , I accidentally hooked up the solar leads up in the reverse and it let me know without causing any problems after that it took maybe 2 minutes to set up . very happy so far it is charging great with 2 lifepo4 batteries it automatically set it's self for lithium.
Karen A. Long
2025-06-29 17:42:05
Received a new unopened package with a 60 Amp charge controller in perfect condition. Installed the unit and it has been working without any issues. The BT actually communicates better than a controller (another popular brand) installed right next to it. Very happy with this unit and this was 5th brand of controller that I have used.
Amanda
2025-06-01 12:11:42
I purchased this power inverter for my solar panel project. After watching various youtube videos on power inverters I chose this one as it seemed to check all the boxes for my needs. I am happy to report that I was able to easily install this and it is working like a charm. It's sturdy and well made (not like some of those cheap ones I've seen) and this inverter is doing exactly what I need it to. I am very pleased.
Musixz
2025-05-04 15:36:51
Now, I cant speak yet towards the reliability of their products (been I ordered this controller along with two of their 100Ah Lipos.Everything is packaged well. The items seem to be of great quality. The instructions are well designed, with GOOD English. All the parts, screws, brackets, mounting templates are included.The charge controller has huge terminal holes and feels solid. Terminals are labeled front AND bottom. Wow. Setup is pretty much PnP for 12v Lipos.The one less than stellar thing is the app. Uggh.First, HUGE!!! points for not requiring all the BS permissions so they can watch what you say/where you go/what you eat/etc. Nope. Just the bluetooth stuff it needs to function. Nothing more.The app itself is nowhere near the level of the physical stuff. Not much info. Font size issues. Odd BT connectivity issues. But, at least you can see the basics from your phone/tablet.So far, I a big fan. If the stuff proves to be reliable, and they improve the app some. They will continue to be my first choice in this product category.UPDATE (April '24):Horrible support and horrible products. 5 months in, I switched the PV from a 12v setup to a 48v (39v actual) one. With the controller still set to a battery voltage of 12v, it sent the full 39v to the batteries and my 3000W inverter.The inverter blew up. Sounded like bacon cooking and filled the entire room with smoke before it went dark and I could trip the inline fuse.This is unacceptable. I verified a couple times with a meter that it was outputting the full 39 volts while set to 12v. That is an epic failure and could have started a fire if I wasnt home.The company only responds during the early morning hours and ignores most of what you say only to ask you for info you already provided. Over and over. 24 hour wait each time.My PV array maxes out at 1800W @ 39v (more like 1200W in reality). So, even though the system supports 48v, it only supports 900W for a 12v battery. So, I apparently, in theory could have "exceeded the wattage" and it outputted the full voltage even though the system was set to 12v. Seriously. A MPPT. That's what they said.Started out so good but ended up being so much worse than all the stuff I used before. I hooked up the Ampinvt controller (that the LiTime controller replaced) and its working perfectly (39v IN -> 14v out) - with a new inverter.LiTime now refuses to replace the defective charge controller and the battery that was clearly damaged as a result - even though they are both still under warranty.Dont make the LiTime mistake!
kosh tarr
2025-04-23 13:49:38
Been running 2 of these 24/7 for about a year now. Works great. The Bluetooth and app could be better but is serviceable. A major app update would be great.
Doug A.
2025-02-27 11:17:07
I upgraded the battery in my nearly 40-year-old solar battery system at my off-grid cabin from lead-acid to LiFePO4, having gotten tired of replacing the lead-acid batteries every three to four years. With the change in battery type I also had to change the charge controller. I'll spare the details of a few other controllers I tried and finally bought what I should have in the first place, this LiTime 30A MPPT charge controller.This controller was easy to install and configure. The Bluetooth interface, which other suppliers offer as an option and charge extra for, was included and that was an added bonus for collecting data on the use and performance of my system. The companion free app installed easily on my Android tablet and is intuitive to use, though there are a few humorous "Chinglish" messages that appear. e.g. "Disconnected successed" comes up when you close out of the interface for the controller.The attached photos are of the controller installed in the load center of my system and a screen shot from the Bluetooth app on my tablet at the end of the season just before I shut everything down to close up for the winter. The discharge amp hours are not entirely accurate because I do not run the entire load of my cabin through the controller, that comes directly off the battery. I have a composting toilet with electric fans which I operate through the controller when we are away so the controller will shut those down if there would be some failure in the solar array or a very extended stretch of bad weather that would prevent the battery from charging enough.This controller has made my system almost completely hands-off in terms of day-to-day operation. With lead-acid batteries, especially late in the season, I had to constantly monitor the battery voltage and charge state because the reduced full sun time on my array at that time of year. This controller and the LiFePO4 battery just worked.
EmusS
2025-01-12 17:12:13
After purchasing several cheaper supposedly mppt controllers this is the best hands down. Very happy with its performance. Detects sunlight soon as the sun starts coming up. Bluetooth works great and is nice to keep an eye on the system. Spend the money and get a good controller like this. It's well worth it.
C. Chaster
2024-12-13 18:31:36
Matched this MPPT up with my LiTime batteries and it works great. Overall construction seem good although the buttons feel a little cheap. App works fantastic for monitoring all the stats and allows me to turn on the load without diving into the cabinet where it is mounted. You do have to be fairly close to connect the bluetooth but hasn't been an issue for me. Was similar or cheaper than some other options and I had no worries about any compatibility as it is LiTime same as my batteries. Would definitely buy again or recommend.
Andre
2024-11-23 18:50:22
schicker Laderegler , Bedienung ist erklärend , Anleitung dabei , Kühlung ausreichend , Anzeige sehr gut lesbar auch bei Sonnenschein , die APP funktioniert , das Gerät kann man empfehlen , Anbei ein Bild angeklemmt an einer Solartasche mit 120Watt angabe .
Recommended Products

$304.84

$ 99 .00 $99.00

5.0
Select Option