Your cart is empty.
Your cart is empty.Product Description
Compatibility:
- Fits Predator 212cc Engine
- Fits most 196cc OHV Clone engines
Enhance Performance
Easy Installation
High Reliability
Brand new with good performance
Why Choose Our Products?
Michael Tucker
2025-09-03 18:24:44
Loud like I want and sits perfectly where I need it the measurements are not listed but the one I did measure if anyone wants to order a muffler with it is THE TIP coming in at 34mm OD 32MM ID I do recommend some exhaust wrap for it
Matthew Kitson
2025-08-29 21:23:30
If you have a compact or skinny mini this is trash it will hit the frame on every bend point location other than that the quality is freaking sturdy took me 20 mins to cut through and looks beautiful but I’m pissed ..
Kimbo
2025-08-28 09:49:10
Fit just right. Sounds cool. Seems built well enough. My kid loves it [so do I lol] sound doesnt come through on video but its great letting off after a wide open throttle . actually burbles. Now I wanna get a cheap muffler tip to put on the end and really look kewl.
Customer
2025-08-24 10:02:02
I've never left a review, but this was just infuriating. First, it came in a box with no packaging, just rattling around inside. Second the pipe was BARELY tack welded to the engine mounting bracket. I picked it up, and it fell off. Third, the pipe doesn't even fit on the bracket, there are gaps so obviously exhaust is going to leak right out. Buy something else, there are lots of options similarly priced. Don't buy this one.
Duncan McGee
2025-07-25 13:26:10
I bought this along with a new intake for my Coleman CT200u-EX. It bolted right on however I should note that this didn't come with an exhaust gasket, and I had to bend the pipe to allow clearance for the rear tire. This sounds so much better than the factory muffler, and I managed to squeeze some extra speed out of it. Top speed now hovers around 58 when previously it was about 54. The location is nice because it is nearly impossible to burn your leg on this the way it routes through the frame.
Oren Robblee
2025-07-22 15:04:23
Good product and the weld is solid. Definitely better than the more expensive versions.
T. Ed Mont
2025-07-03 12:06:09
Nice looking, smooth bends, problem is it does not fit my CT200U-EX. The bends are too sharp, causing it to hit the frame so the motor flange will not bolt up.
Larry williams
2025-06-05 17:04:23
The media could not be loaded.
Rachel Boudreau
2025-06-04 17:05:46
Had to bend the pipe for it to fit on my Coleman bt200x and the pipe ended up splitting and cracking in multiple places, sounded great for a couple days
chris
2025-05-20 15:13:54
Did not fit the Bike. I had to heat it and bend it about three inches to clear the frame.
fredaccord95
2025-05-07 15:52:49
Ne fitte pas sur un BT200X! J’ai été obligé de le modifier, couper et souder! À ce prix là , ce n’est vraiment pas l’idéal
Michael Tucker
2025-04-20 12:26:39
Loud like I want and sits perfectly where I need it the measurements are not listed but the one I did measure if anyone wants to order a muffler with it is THE TIP coming in at 34mm OD 32MM ID I do recommend some exhaust wrap for it
Matthew Kitson
2025-04-08 16:53:36
If you have a compact or skinny mini this is trash it will hit the frame on every bend point location other than that the quality is freaking sturdy took me 20 mins to cut through and looks beautiful but I’m pissed ..
Kimbo
2025-03-28 11:08:26
Fit just right. Sounds cool. Seems built well enough. My kid loves it [so do I lol] sound doesnt come through on video but its great letting off after a wide open throttle . actually burbles. Now I wanna get a cheap muffler tip to put on the end and really look kewl.
Customer
2025-03-25 12:56:48
I've never left a review, but this was just infuriating. First, it came in a box with no packaging, just rattling around inside. Second the pipe was BARELY tack welded to the engine mounting bracket. I picked it up, and it fell off. Third, the pipe doesn't even fit on the bracket, there are gaps so obviously exhaust is going to leak right out. Buy something else, there are lots of options similarly priced. Don't buy this one.
Duncan McGee
2025-03-14 15:26:55
I bought this along with a new intake for my Coleman CT200u-EX. It bolted right on however I should note that this didn't come with an exhaust gasket, and I had to bend the pipe to allow clearance for the rear tire. This sounds so much better than the factory muffler, and I managed to squeeze some extra speed out of it. Top speed now hovers around 58 when previously it was about 54. The location is nice because it is nearly impossible to burn your leg on this the way it routes through the frame.
Oren Robblee
2025-03-12 12:08:04
Good product and the weld is solid. Definitely better than the more expensive versions.
T. Ed Mont
2025-03-10 15:17:17
Nice looking, smooth bends, problem is it does not fit my CT200U-EX. The bends are too sharp, causing it to hit the frame so the motor flange will not bolt up.
Larry williams
2025-02-23 11:35:44
The media could not be loaded.
Rachel Boudreau
2025-02-19 15:16:01
Had to bend the pipe for it to fit on my Coleman bt200x and the pipe ended up splitting and cracking in multiple places, sounded great for a couple days
chris
2025-02-09 21:14:19
Did not fit the Bike. I had to heat it and bend it about three inches to clear the frame.
fredaccord95
2025-01-15 16:15:09
Ne fitte pas sur un BT200X! J’ai été obligé de le modifier, couper et souder! À ce prix là , ce n’est vraiment pas l’idéal
Recommended Products
$136.00
$ 64 .99 $64.99
$219.99
$ 99 .00 $99.00
$134.00
$ 60 .99 $60.99