Your cart is empty.
Your cart is empty.Thin M3 square nuts made from A2 Stainless Steel that conform to DIN 562.
Customer
2025-05-30 12:29:33
They work for 3d printed r2d2!
K. Gross
2025-05-27 12:30:14
They are perfectly sized for the MK 3/3S/3S+/4Worked on a few machines that needed parts, these were a match.
Trailblazer
2025-05-10 11:31:17
I used these nuts for creating a toy television show prop. They 3D printed pieces required use of squared nuts. These worked perfect for the purpose.
S.Sawa
2025-03-01 11:15:00
My most used piece of hardware, perfect for embedding or slotting into 3D prints. Only wish I could buy in much larger quantities!!!
Mark
2025-02-21 11:09:58
Nuts measured around 5.4 x 5.4 x 2.3mm. Nuts are too thick and does not fit Prusa's printed parts design.
The Punch
2025-02-12 17:03:48
Thickness varied a bit, but we’re between 2.1 and 2.35 mm, too thick for what I needed them for.
ray c
2025-01-16 19:14:09
works great with prusa and fits perfectly.
Thomas Teallow
2024-11-29 15:24:25
These are not 1.8 mm wide. They are over 2.0 mm wide. Do not buy these to use with a Prusa. They will not fix.
Recommended Products
