Your cart is empty.
Your cart is empty.Product Description
High toughness, abrasion resistance, high-speed cutting for the high hardness
135°split point trip for fast drilling
High speed steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and non-ferrous materials
Improved control during installation, Threaded mandrel fully engages internal thread
One-piece structure,much stronger and solid compared to a normal helicoil
Customized EVA box, easy to store, easy to carry, not easy to drop.
Eric Smith
2025-07-20 17:41:24
Worked great! instructions were really clear, no complaints
james mandelbaum
2025-07-18 15:05:10
It did the job - thats what matters! had a stripped bracket on my bike and was using locktight to hold it in place. With using the kit, it now has a solid screw in place with a tight fit. Needed to read the instructions and even watched a video on how to do it but with the kit it was easy and it worked. Hopefully I wont ever need to use it again, but if I do, I am ready.
Shawn Goodall
2025-06-27 11:53:56
I was very happy with the results. I put threaded inserts M6x1.0 into my ls heads for valve cover bolts. I had a real mess before I spent the money. Now Im sitting here looking at the M8x.125 for the rocker stand studs. Expensive aftermarket heads come with steel inserts. These gave a very professional looking finish I'm happy to show off. The tap isn't super easy to use. Not sure If I did it wrong or what, but after I drilled then tapped the holes. Thats when I used the counter sink. So I needed to go back and clean threads up to make sure it all went in smooth. If they didn't cost as much, I would have inserts in every aluminum boss on this engine.
Josh T.
2025-06-03 14:07:04
Complete kit to drill, tap, and install new threaded bushings. Inserts are of good quality and have a flange. Drill bit stayed sharp drilling into cast aluminum. The counterbore tool was dull and did not do a good job. The installation tool also bent one the first use (I used a bolt with jam nut instead).
Raymond O.
2025-04-29 13:20:47
Counter bore tool could have better teeth. Cuts well on annealed and soft cast aluminum. Not so great on work hardened or machined aluminum or harder metals.
dana
2025-04-08 20:46:23
Time-serts require a countersink bit but the one provided became dull and would not cut after the first hole rendering the kit useless.
ByReaL
2025-03-03 16:49:54
worked as advertised solved the issue
Robert K.
2025-02-15 18:47:03
Quality thread repair kit highly recommended it
Recommended Products