Your cart is empty.
Your cart is empty.Product Description
Fusion Cool 2269
Exceptional Low Odor, High-Lubricity, Semi-Synthetic Microemulsion Coolant
This cutting fluid is perfect for band sawing, grinding, drilling, milling, reaming, roll threading, tapping, thread forming, and many other machining applications.
Supports Long Sump Life and Excellent Machining Capabilities
Metalworking fluids are critical to maintaining efficient performance across operations. The lubricity will prevent chips from welding, especially for high-speed milling and turning operations.
General Purpose Coolant for Cutting and Grinding Machine Shop Operations
- Versatile - used in a variety of applications
- Excellent Corrosion Protection
- Safe and Mild
- Long Sump Life- Biostable
- Good Lubricity
- Chlorine Free
- Contains no nitrites, tirazines, phenols, chlorinated or sulfurized EP additives
Erich Keane
2025-07-17 17:47:13
I picked this up for my home shop. This oil is intended to be mixed 10:1 or 20:1 with water. I filled a quick cup of it, and tried some turning. When mixed 10:1, it is too 'thin' to be used as a brush-on cutting fluid. I found it got thrown off almost immediately.However, when I used it with my surface grinder as a flood coolant, I found that it was at least as good as most other grinding coolants I've used.So if you have a mister or a flood coolant, this is likely a good choice. I DO appreciate that it is not very 'smelly' like some other fluids I've used in the past, it has a nice neutral smell, which is particularly nice if you have manual machines where you'll get some on you!
Trevor & Amber
2025-06-10 15:56:39
Used this cutting oil when I was milling some cold rolled steel out, drilling holes and it does a good job at keeping the metal cool. I have used other cutting oils that I purchased locally and would compare this brand of cutting oil to the other cutting oils that I have used as far as cooling/performance goes! I mixed ~10% water with the cutting oil when I put it in a spray bottle to use it.
JP
2025-05-07 12:23:47
I tried this on the lathe in a brushed on application; however, it did not cling well enough to be useful. I then tried it using a mist, and it worked great - also worked great in a recycled flooded application on my band saw. Bottom line - it is thin (and doesn't gum up) and works best in a misting or flooded application.
N.
2025-05-06 14:12:27
Works for high-flow or flooded cooling.From what I've seen, this cutting fluid would be ideal for flooded band-saws and CNC machines where you run a continuous stream of thin coolant. It works ok for manual milling, but it doesn't cling to the surface of the material very well so I probably wouldn't use it for any kind of turning where it will likely just get flung off.
Mr help you
2024-11-24 17:39:52
This machine grinding fluid is great for when I'm tapping a hole in my engine block head or doing some metal fabrication work. It says to dilute this fluid but I will sometimes use it full strength or dilute it 10:1. I also use this fluid on various chains or blades that I need to keep rust free when not in use. 5 stars.
Recommended Products
$219.46
$ 88 .99 $88.99