Your cart is empty.
Your cart is empty.The forged steel jaws of this left-cutting snip are set at a 90-degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left cuts with either a pushing or pulling motion. A serrated edge on the upper jaw and compound head-to-handle linkage provide powerful, non-slip leverage for cutting up to 24-gauge (0.61 mm) cold rolled steel or 28-gauge (0.38 mm) stainless. Handles feature non-slip, cushion inserts, torsion-spring action and a squeeze-open, side operated latch. Rust-resistant polished forged steel jaws and black oxide finished handle stampings promote long service life. AV8, Vertical Left Cut, Red Straight Handle, 1-3/8 in. (34.9 mm) Cut Length
KFG
2025-09-03 17:28:38
Dulled out my old ones that were probably 15-20 years old. Malco seems to still be making quality products, so I hope this pair lasts just as long.
Lazaro
2025-08-23 11:17:20
I was surprised with the ease of use and the resulting work. I drilled into the center of my oval drawing on the aluminum gutter into which I inserted a downspout drain and cut out the material. This was work on a mounted gutter and I inserted the tip of the snip into the drilled hole from underneath the gutter and cut along the line and made the oval hole. I intentionally used just the tip of the snip as I slowly cut along the line. I looked at the work from above the gutter as I used the snip underneath the gutter. It worked great.
Chris
2025-08-03 13:20:01
Great price
John Reyes
2025-07-22 15:58:55
This tool is great for me to use when I am doing birdcage and it’s easier to cut the cage at a elevated angle to ensure precision cut on the screen to apply it to the facia and then stable it
Mathew Draper
2025-06-29 13:50:44
I purchased these snips to see how they work with ceiling grid. Sometimes the mains or T's need cut back from the wall. They are great. My current project only has 4" clearance and I had no trouble getting about the main to cut.
Brian VanderLeeuw
2025-05-19 12:39:37
Great for those tight places. Or cutting duct work up in the bay. And even helps with over head cuts for supply plenums and return drops.
Steve Bowden
2025-04-30 15:36:32
These are a great pair of snips. I have cut large amounts of 24 gauge stainless with the and still sharp
Josh f
2025-04-22 20:12:27
pretty straight forward, used to cut sheet metal duct work
Analy O.
2025-02-14 12:41:36
Love them good quality solid I would definitely buy them again
Stephane G.
2025-01-31 15:28:40
work great
Recommended Products
