Your cart is empty.
Your cart is empty.Express Yourself Feel the need to express yourself fully? Expand and unlock the full creative scope of your controller or keyboard with M-Audio's universal EX-P Expression Pedal. With M-Audio's EX-P Expression Pedal, any MIDI assignable control or parameter can be manipulated in real time; use the EX-P to control any assignable variable MIDI controller value including volume, modulation, panning, filter sweep and more. Adding an extra layer of expressive capability to your performance just got a whole lot simpler! Universal Compatibility M-Audio’s EX-P expression pedal is fully compatible with all M-Audio MIDI controllers that feature an expression pedal input - including the feature-loaded and industry-acclaimed CODE series. Regardless of whether an M-Audio controller is used, a built-in and discretely located polarity switch guarantees further compatibility with most other brands of MIDI-controllers, effect devices and keyboards. Robust, Reliable Perfect in the studio or on-the-go, M-Audio's EX-P Expression pedal fuses a compact, ultra-portable design with a robust and durable moulded construction. M-Audio's EX-P's smooth pedal action, fused with a 1.8m 1/4” TRS jack (hardwired to the EX-P chassis to add further assurance of reliable performance), universal compatibility whatever your setup and a light grey textured footrest, guarantees to complement your existing hardware while providing the core features you expect from a traditional expression pedal.
HawaiianEye
2025-08-29 18:20:43
It works great!Inexpensive, adjustable knob, and 2 settings on the bottom.Heavy duty plastic, but not cheaply made.
John DeMastri
2025-08-24 12:43:01
Was instantly recognized, but polarity (as noted in many other places) was inverted (toe = 0, heel = 100%). Setting switch on bottom of pedal to "Other" and in Global Settings on the Helix setting "Polarity" for this Exp Pedal to "Inverted" and it works absolutely perfectly. Stays put when set, good range of motion. Will likely buy a 3rd (if I find something to control with it - using 2 now for Vol and Wah-or-Delay Fbk). Took longer to update my presets to use this rather than an external mapped MIDI pedal than to set the pedals up. Allowed me to remove a big external controller (Behringer FCB1010 - which I loved for a long time, but it's too big for my current space) from my rig. Overall great and 1/3 the price (or even less) than other options with 100% of the functionality.
Bruce
2025-07-20 13:23:41
I like having the adjustment knob which allows me to set the silent point of the travel at the physical stop. The adjustment is a bit sensitive, and slightly difficult to set exactly. Also, there is a tiny bit of free play in the pedal linkage, which makes precision a bit less than I would like. The mechanism, a slotted lever and round pin, is very standard for foot pedals, and I am being overly picky about that. I am comparing this to a Studiologic VP-27, which I have nearly worn out. The VP-27 uses a nylon rack and pinion gear system, which is slightly more precise. Overall, this is a very good expression pedal, which should work well for nearly any expression pedal application using a TRS plug.
Jan San Luis
2025-06-25 15:23:47
Works well with the Boss Katana 100Mk2 with the GA-FC EX Foot controller. Good build quality and looks sturdy. Works as a volume control and wah. I highly recommend if you’re on a budget.
SonicWeaver
2025-06-17 13:58:34
For $20 it's decently made and a great value pedal that can be configured to work with many devices. But you do need to know what your device requires (electrically) in order to set it up properly. The documentation is all in Chinese with no explanation of what's inside or how it's wired. I disassembled mine and created the attached schematic.You'll need check out the schematic and configure it for your use. Here are the components and their functions:SW1 - Switch on the bottom reverses Tip and Ring on the 1/4 TRS plugR1 - 1k resistor in series with the wiper on R2R2 - 12K potentiometer that is controlled by the pedalR3 - 50K Low Limit trim potentiometer that is in series with the sleeve (ground) on the 1/4 TRS plug and the R2 pedal pot. It is controlled by the gray knob on the left side.Turning the Low Limit trim gray pot all the way counter-clock wise bypasses it and turning it all the way clock-wise adds 50K ohms to the circuit. So all the way CCW means it acts as a 1k to 13k pedal. All the way CW and it acts as a 51K to 63K pedal. Half way would add 25K so it would act as a 26K to 38K.You can't get to zero because of the 1K resistor in series with R2's wiper. If you need to have it get to zero ohms as I did for my Line 4 DL4 and have basic soldering skills this can be easily done by taking off the bottom plate and simply soldering a jumper wire between pads on the each end of the 1K resistor. You will then have 0 to 12K or as much as 50K to 62K depending on where you set the Low Limit trim pot.I'm using the EX-P as an expression pedal for my DL4 delay pedal and should work on all of their modeler pedals if you bypass (by shorting across) the 1K (R1) resistor.
Joseph Emenaker
2025-06-03 17:27:21
I’ve been struggling with finding a good expression pedal for my Helix. Line 6 products don’t use a TRS connector, so the ring contact of a TRS plug will get grounded and, depending upon the pedal is wired, will cause really odd behaviors (like reading 100% when the pedal is near the middle, but 0% when _either_ toe or heel is all the way down) or just non-linear expressions (like the Helix reading 50% when the pedal is only 30% rocked forward and reading 75% when the pedal is at its midpoint).If you google a bit, you’ll find forums and diagrams describing how to resolder various expression pedals to make them work with the Helix. I didn’t want to do that to my nice Roland EV-5, so I looked for something cheaper. I tried the On-stage KEP100, first, but that has a 100K potentiometer, which is too much for the Helix.So, I ordered a couple of the M-Audios (because I read they had 10K pots, like the Helix likes) fully expecting to have to rewrite them with TS connectors to make them work with the Helix. To my surprise, they worked (almost) out of the box. The only thing I had to do was go into global settings in the Helix and set the pedal as “inverted†(so it read toe-down as 100% instead of heel-down as 100%). After that, it worked great. Helix reads 50% when the pedalIs rocked half-way, and I get a nice linear progression of values as I rock the pedal back and forth.
Milton De León
2025-04-26 17:50:15
Este pedal está hecho con buenos materiales!Y mucho más barato que los de siempre...Tiene para cambiar la polaridad, y un botón de ganancia en el mismo pedal...Es una chulada...
Customer
2025-04-05 15:58:26
Arrived next day, seems well made for my use at home, I'm sure it would survive gigs if you treat it nicely. Works great with for controlling my Helix Stomp which was the intended purchase, way cheaper than the alternative pedals. Overall I have zero regrets on this purchase!
Amazzone
2025-03-28 11:43:20
Poca spesa, tanta resa! Funziona ottimamente come pedale di espressione per chitarra elettrica, collegato a una pedaliera midi (M-VAVE Chocolate nel mio caso) per comandare lo "Wha" di Amplitube su pc. La costruzione è anche solida per la spesa esigua. Il jack non è rimovibile, nel mio caso mi sarebbe bastato più corto, ma va benissimo così.
Emmtac
2025-01-25 12:45:06
La différence de prix entre des pédales d'expression est assez hallucinante. Donc bien que cette pédale ne soit pas parfaite le prix est incroyable pour un résultat plus que convenable. Je l'utilise pour entre autre jouer avec des vst de strings et d'orchestres. Ne permet bien sur pas de créer des chaines d'effets entre différentes pédales mais pour l'objectif que j'avais c'est parfait vu son prix. La petite molette sur le coté pour régler le niveau d'expression est bien pratique. La pédale a parfaitement été reconnue par mon clavier KK S88 mk2 après une petite manipulation facile à trouver dans le mode d'emploi du clavier. Seul petit reproche je la trouve un peu trop souple pour parfaitement gérer le niveau d'expression mais avec un peu d'habitude ça fonctionne quand même. Semble solide et de toute façon elle restera dans mon home studio et ne sera pas utilisée en live sans quoi j'aurais sans doute choisie un autre modèle. Bref 4 étoile pour l'ensemble mais 5 pour le coté qualité prix... A voir dans le temps.
jose
2024-11-18 15:48:02
Lo compré como alternativa al pedal fc7 de Yamaha ya que su precio es mucho menor,Pues oye, funciona perfectamente y puedo modular el superknob a mi antojo.Lleva una rueda en el lateral que permite modificar el rango de la modulación.El pedal es suficientemente pesado y no se mueve del sitio, por el precio es súper recomendable.
Recommended Products
