Your cart is empty.
Your cart is empty.Product Description
Visual representation of stacked MAXTRAX
Stack of 4 MAXTRAX MKII
For MAXTRAX MKII, Mini's or LITE boards, the lowest profile setup
Stack of 4 MAXTRAX XTREME
For MAXTRAX XTREMES
1 Set of MKII and XTREMES using the Combo Pin
For Mounting MAXTRAX MKII and XTREMES together
Key Features
Design
MAXTRAX Mounting Pins are designed to interface perfectly with our patented Keyhole mount and will not work with other brands.
Quality Construction
Made from high-quality Nylon and tough stainless steel, MAXTRAX Mounting Pins are designed to withstand off-road use, whether that's from the elements or the occasional knock from a tree branch on the trail.
Locakable
Each pin is lockable using a standard TSA-style padlock or the MAXTRAX MAXLOCK
Mounting
Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
MAXTRAX Mounting Pin FAQ
WILL THESE BOLT TO MY CROSSBARS?
MAXTRAX Mounting Pins will directly bolt into any M10 threaded Aero-style crossbar. If your crossbar does not accept M10 threaded fasteners, drilling may be required*.
*Always consult your crossbar manufacturer prior to drilling.
WILL THESE WORK WITH MY ROOF RACK?
Always double check with your roof rack manufacturer, many brands have MAXTRAX Mounting Pin Compatible brackets
Including: Eezi-Awn ⊕ Front Runner ⊕ Rhino Rack ⊕ Yakima ⊕ Prinsu ⊕ M-Racks ⊕ And more
CAN I USE THESE WITH OTHER RECOVERY BOARD BRANDS?
MAXTRAX Mounting Pins are designed to work exclusively with MAXTRAX boards and when used with other recovery boards, the pins will not properly secure and the recovery boards may separate from the vehicle.
Layout dimensions
Ensure your rack has enough length to accommodate the full length of your boards
Please note: Manufacturing tolerances may affect the dimensions shown above, so please check these measurements against your MAXTRAX Recovery Tracks before drilling. Measure twice. Cut once.
Yardsale
2025-07-23 11:10:15
I am not sure about the reviews complaining about this product. Difficulty either installation, problems with the stainless steel, etc. My 17mm MKII mounting pins were perfect. The hardware was stout, the lock nuts were great, and the install went perfectly. A great product and high quality. Perhaps those who complained bought knock-off products? Buy the originals and be happy.
Henry Voskanov
2025-07-17 16:23:20
Best mounting pin for MAXTRACK
Customer
2025-06-08 11:06:56
Product met my needs
Brian Ladd
2025-05-17 13:39:59
Works great, fits the Maxtrax Extremes with no problems. Make sure you get everything lined up before tightening.
Travis Yost
2025-05-13 10:37:13
Check your threads! I have two secured to my bracket and the third I threaded the nut 3/4 way down and it seized. Now it won't come off and the plastic portion stripped and I had to cut it off to remove from my bracket! I hear stainless steel can do this sometimes and noticed some material on the other pin threads that I cleaned off with a small wire brush. Other than that these are great. Just need a warranty replacement for the one pin. Thanks
Mr. Free !
2025-04-26 17:15:32
It's a good quality mount for 2 or 4 MaxTrax which is nice because it works the same with either As it turned out the 4 MaxTrax and where i was going to mount them didn't work but I'm keeping them for another build in the future.
BIO BLADE
2025-04-18 17:43:30
Only fits two off bran boards, I also had to knob out the holes on these boards in a direction that is easy to turn the outter pin part to keep the boards locked in.. they been on the truck better part of a year. They pop on and off with ease, also boards are cheap enough I don’t lock it with a pad lock, so if the boards are stolen I’m out what $60 🤷â€â™‚ï¸ It’s a lot of money but gotta say so far so good. Great product. Always seeing it’s sold out.
Nichole D. Baker
2025-02-15 15:59:34
Nylon nuts did not work, bought anti seizing lube and 7/16 nut from HD, still didn't work. ordered M10s from amazon and worked like a charm
Recommended Products
$11.97
$ 6 .99 $6.99