Your cart is empty.
Your cart is empty.Description "For temperature measuing on liquid, gas in various industries including food, beverage, chemical, HVAC etc Fully stainless steel Pot, Kettle, Brewing bimetal thermometer Dial size: 3"", center back mount Case: 304 stainless steel case and crimped ring Window: glass Dial plate: Aluminum dished dial Pointer: aluminum, adjustable at back of case Bulb: 304 stainless steel, 6"" length including thread Stem: 304 stainless steel, 1/2""NPT male, TIG welding Accuracy:+/-1% Range: 0-250 deg F/-20-120 deg C" Measureman has 20 years rich experience in the measuring of pressure, temperature, flow, level industries, The "Measureman" branded products are the combination of continuous good quality and affordable price. "Measureman" products are selected and designed by professional engineers.
ja1724
2025-08-06 11:38:34
The gauge looks well built and works great. The only issue I have is the listing should be more clear as to what size the stem is and what size fitting it screws into. I was replacing one with 1/4 inch and this one was 1/2 inch. Just had to remove the 1/2 to 1/4 reducer but this meant draining the tank down. Not a big deal but would have been nice to know in advance.
Robert G.
2025-07-27 16:54:48
I tested this thermometer against a laboratory-grade thermometer and found it to be quite accurate. It's well made and a good value.
RedGreenTomatoes
2025-07-08 15:16:04
I ordered them. They came exactly on time.
Toonland
2025-06-30 11:32:33
Pay attention installing them, the brass threads are cut deep so a little bit trickier to get a good seal.
John M.
2025-06-25 20:55:05
In response to the reviewer who wrote, "The threads are not 1/2" but 3/4". " They simply don't understand with what they are working. These thermometers are listed as having a 1/2" NPT (National Pipe Thread) fitting. A 1/2" pipe is 1/2" on the _inside_. Pipes have a wall thickness (otherwise they wouldn't be a pipe). Therefore, the size of a 1/2" NPT fitting is quite a bit larger than a 1/2" SAE (Society of Automotive Engineers) bolt. These thermometers are exactly as described, not cheesy, work well, and will gladly buy these exact ones again if the situation ever arises.
Josh
2025-06-09 09:09:55
Great thermometer! I bought two and realized one of them wasn't properly calibrated. The one that was in good shape was great! The second one I returned. Best in my opinion in regards to the size, stem, etc.
gregtr
2025-05-15 18:13:44
Accurate with easy to read large display. Shipped fast and reasonable price. No downside to this Would buy again.
Rod
2025-05-13 10:54:37
Arrive quickly and on time.One box with each item in it's own bubble wrap bag.I chose this one because it's stainless, it's adjustable, the scale that I wanted, the size I wanted and the stem length I needed.The weight and construction indicates quality.First I calibrated both in hot water using a mercury type meat thermometer.Fit the 1/2" NPT perfectly.
Francisco Abarca
2025-05-12 14:06:56
No mide la temperatura del agua
Oleh
2025-05-07 15:42:31
Very accurate, build solid, clear reading. Good purchase.
Robert
2025-03-17 16:45:49
I attached this to my food dehydrator by drilling a small hole for the stem, so I can keep an eye on the temperature since the thermostat is not calibrated in degrees.
Clyde
2025-03-02 17:57:01
Did not work for what I needed
Leszek1
2025-02-14 18:12:26
This good quality thermometer that I want to install in my lab. The temperature sensor is a bit too taut for my needs, so the wall in the place of the installation will be thinner. I am very pleased with this purchase.
Recommended Products
