Your cart is empty.
Your cart is empty.Product Description
Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Diameter 46mm-51mm Microphone
Mic shock mount with POP Filter
- The shock mount can provide maximum isolation from handling vibrations and prevent unwanted movement of the microphone when you are recording.
- The shock mount allows you to adjust the angle of the microphone with a standard twist to tighten mechanism.
- The pop filter can reduce plosive, wind interference, saliva spraying,provides smooth and pefect sounds.
- Ideal for radio broadcasting studio, voice-over sound studio, recording, Great for your YouTube videos, podcasting, online games.
Mic Shock Mount
The shock mount With a 3/8"-5/8" screw adapter. Perfectly match the most of boom arm and microphone stands.
Diameter of 46mm-51mm (1.8 inch-2 inch)microphone.
Compatible with Many Condenser Mics Like AT2020, AT2020USB, AT2020USB+, AT2035, AT4040, AT2020USB, ATR2500x.
The shock mount made of high quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping desigh, which make the microphone more convenient to install and prevente the microphone from falling.
Microphone POP Filter
Unique Three-layer Pop filter
The U-shaped POP filter has three layers design include foam layer, metal mesh layer and basic etamine layer can effectively reduce the plosive, wind interference, saliva spraying
O-ring design easy to set up
The MIC POP filter can be handy and quick to assemble and disassemble from the microphone and firmly fixed on your mic with the combination design of elastic bands and inner rubber ring, Special design perfectly matches with your microphones.
Perfect size for microphone
Pop filter for microphone type: Diameter of 1.6inch to 2.4inch microphone
Shock mount Installation steps
ClockworkUniverse
2025-09-03 14:12:26
I bought this for my Audio Technica AT-4033 microphone as the elastic bands from its original shock mount had lost all of their ability to hold the mic upright. I was a bit concerned that it might not fit because this microphone is an XLR, not USB -powered mic and, as such, is slightly thicker (only by a millimeter or 2, but still thicker) than the microphones that most of these universal shock mounts are designed for. But, because of its expandable clips that allow the cylinder to open and close, I was able to get it in there without much trouble. And, because the spring tension on those is so strong, it really holds the mic very firmly in place so I have no fears about mounting it upside down as is my preferred position to use it in while it's in the boom stand. The pop filter is also a nice addition, although, if push comes to shove, I probably prefer the kind that attaches to the mount itself, not the microphone, and holds the filter a bit farther from the diaphragm than this one does. But on the other hand, those can be awkward to adjust and can get in the way, so this probably will work fine and certainly looks neat and tidy. I also liked the fact that this shock mount is made of metal instead of plastic, except for the part where it screws on to arm of the boom stand which is plastic with a metal insert. All in all, it does the job it's intended to do well, fits my slightly thicker mic, seems solid, and is reasonably priced. Definitely a great value for the money.
Big Burt
2025-08-29 14:14:40
Works great, I have a big chunky no name brand microphone, I had no confidence would be supported. Turns out it fits perfectly, good tension system in the design if your microphone is the proper type. Attached to my rode mic arm beautifully. I use it everyday.
MG
2025-08-09 18:05:01
I bought this unit is in affordable alternative to the rather expensive shock mount for the Rode NT1. For $14 I set my expectations low so here’s the lowdown:1. The unit seems OK in regards to construction but there are no teeth in the tightening mechanism so expect that eventually it will get stripped out as most older design shock mounts invariably do.2. You have to squeeze extremely hard to get the mechanism open enough to except a microphone of the diameter of the Rode. Since this is a universal shock mount if you have a thinner microphone it will be easier. I would not recommend this for anybody without good hand strength and definitely not for anybody with arthritis or any other condition that makes it difficult to squeeze things with a large amount of pressure.3. As I mentioned in the title of this posting, the pop shield is fairly useless. Not only is it tricky to get on the microphone but mine came covered with a little bit of sticky glue all over the mesh of the pop filter. I understand that the pop filter is more of a bonus when buying this shockmount but I would’ve almost liked to not receive it at all then to be so disappointed with how poorly it’s designed and made. The whole thing is made of plastic and the pop filter area is something that resembles mosquito netting. They did include two extra rubber rings to mount it with so At least that was a nice addition for when the ones already on the pop filter break.4. UPSTORE was very responsive and kind enough to replace the unit with another unit they offer http://a.co/5OPhEBR but that one did not fit my Rode NT1. If the UPSTORE people are reading this please update your listing because the new unit you sent me doesn't fit the The Rode NT1. This mic has a very unique and small thread, somewhere in the range of 18-19mm so none of the 21mm shockmounts will work with it. So...that leaves you with this as the ONLY low cost option unless you want to shell out $55-$75 for the Rode sanctioned units.
xterling
2025-07-26 15:33:39
Got this for my old Rode Nt2. Perfect fit. Stable and secure, pop filter works well. Quality goes beyond the price point.
KStearns
2025-06-14 12:55:10
Sometimes when you buy stuff like this, it arrives and you know it's junk. This isn't. Way better than I ever expected. It's solid, holds my MXL Mark III mic perfectly. There is good solid rubber inside the mic mount. Good adjustment can be achieved with the turn screw. The pop filter? Let's talk about that! It's compact, fits nicely over the mic head/body, and I can finally do away with the ugly, annoying and intrusive round pop filter I was using. It never attached properly to my boom, I could never see around it to view my monitors while I am podcasting, and it made my work a chore. Now, with this streamlined, compact filter I can adjust my mic for optimal voice quality, view my monitors and I'm looking forward to my next podcast! I highly recommend this product for giving you a great shock mount as well as an excellent pop filter for not a lot of money.
Cole
2025-05-08 13:33:47
It's cheap and about what you'd expect from something this price. It definitely works a little to absorb shock but I still have to use good noise suppression software. I think most of the parts is actually pretty good but the band (that's used to do the shock absorbing) is too stiff. It's also not great for someone who wants to adjust the mic position often. The joints can be a little finnicky
Tristan
2025-04-12 18:34:27
fits well on the HyperX Solocast, slightly flimsy quality but it is a noticeable difference if you make an impact at the boom arm base. the filter is good too.
Gowtham
2025-03-03 15:08:41
Paid 4k for this Mount. Definitely not worth it. The body is very stern and hardly reduces vibrations. There was no return policy when I purchased this. Ideal one should pay 300 rupees for this. Not sure what I was thinking when I made the purchase.
Charlie Lee
2025-01-04 13:05:42
Apart from the pop filter that I can't fit on (probably because I am stupid) it is very good.
Anon
2024-12-31 18:37:09
I’ve been using the hyperX quad cast since launch I’ve loved it, the mount on it broke so I got this one hoping it would work and the main clamp doesn’t fit but removing the clamp to put in the quad cast with its original shock mount’s mounting points it works perfectly, this is a great kit also helps kill the bright red light of the quad cast, highly reccomend.
Customer
2024-11-18 20:04:50
I had no issues mounting this on my boom arm and looks great and works good.
Recommended Products
$89.00
$ 34 .99 $34.99