Your cart is empty.
Your cart is empty.Product Description
debutydawg
2025-08-27 18:37:48
Amazing quality and price. Prints stick perfectly and release easily. Way better than what the printer came with.
SnowRa
2025-08-23 18:32:45
The print bed arrived without any issues. The quality of the material is durable and feels reliable. A small detail that I really liked is that the bed’s color matches the black of the body, while adding a grid pattern that improves adhesion.It’s easy to adjust and level when necessary, and so far, it hasn’t caused any problems. It fits perfectly on my Anycubic Photon Mono M5s Pro. I’ll definitely consider purchasing more print beds in the future when needed!
Donya Quick
2025-08-18 11:07:46
The build plate that came with my M5s was fine for a long time and then one day nothing stuck to it. Turned out the "stem" immediately above the plate had somehow gotten bent very slightly. There are no leveling screws on that plate since the M5s is supposed to be "auto-leveling" - but whatever it does during that process was completely unable to compensate for the tiny angle introduced by the bent part. This replacement product has screws that allow manual leveling should I run into a similar wear and tear issues down the road, in which case I can just re-level instead of replacing the whole build plate. There is also a firmware upgrade available for the M5s to make manual leveling with this kind of plate easier, but it can be done without that update too. I'm very happy that my M5s is back in service now.Correction/update: after aggressive disassembly, the original build plate I was replacing apparently does have what I presume to be leveling screws - but they were hidden behind glued-down plastic panels that had also wicked resin up into the area around the screws. Those screws stuck due to the resin that got in, so I now also appreciate that this product I'm using as a replacement has an exposed screw design more like the plate on my older Photon M3, where the leveling screws are exposed and therefore will be significantly easier to keep clean than on the came-with-the-printer version.
KissingTaco
2025-05-22 12:03:55
I bought this to upgrade my build plate from my old and trusty Anycubic Mono X.The laser etching is great. It makes popping prints off so easy. No more chiseling with the paint scraper. Simply push and twist and the print pops off.My only issue is the mount. The mount is about .9mm too wide causing it to wobble. I have to be extra careful when putting it back on the printer so that it's locked in and mounted. I haven't had any issue but it could be a hair tighter.I can take my old plate and move the mount from that one on to this one and will probably do that next.
Johnny 5
2025-05-12 16:49:14
I have a couple of these print plates, but this one is the best with the checkerboard pattern it is great, So far since I been using this print head, it been dead on prints. The raft on one of my prints did stick a little too hard, but nothing a little hot water could take care of. Beyond that all other my prints came out great. I just took it out of the box, calibrated it and print. Thinking about getting another for my stock. Can't go wrong with this one.
Vishal Gupta
2025-05-10 14:44:17
Decided to try this out since the bed that came with my Mono X was hopelessly warped. This is working well so far.
david rodriguez
2025-05-07 18:41:48
Genial
Heather Brownlee
2025-04-22 13:10:47
On my Anycubic Photon Mono X, I find this plate works better than the flat OEM plate. Easier to remove my model, especially if I need longer exposure to get base layers to form correctly.
Jordan Louis
2025-04-09 14:31:33
This thing is amazing. The adhesion is great for the vertical forces, yet it releases nicely when force is applied horizontally: just what you need for resin printing! I'm glad I replaced my 3.5 year old heavily scratched build plate!
Customer
2025-03-16 14:19:01
Perfect replacement for my Photon Mono XL printer
A.G.
2025-03-15 13:24:19
Eigentlich im FDM-Druck zuhause kommt man nichtsdestotrotz an Resin und seinen Möglichkeiten nicht vorbei und landet dann wieder in der Schiene, was verbessert werden könnte (obwohl das Original es tut).Das Angebot, diesen Ersatz ausprobieren, habe ich zwar gern angenommen, doch im Hinterkopf schwebte dieses "never touch a running system". Völliger Unfug - einfach machen, Rest macht der Drucker.Fazit: Sehr gute Verarbeitung, sehr gute Passform, sehr gute Haftung, alles prima. Volle Punktzahl, in meinen Augen gutes Preis-Leistungs-Verhältnis und eine Empfehlung wert.
Eric rode
2025-03-09 09:03:23
C'est exactement le même plateau que celui qui est livré avec la photon mono 2. Il est parfait.
Iván
2025-02-13 12:59:55
Muy buena calidad, el dibujo hace que las piezas se adhieran mejor que con la que traÃa de fábrica, totalmente recomendable.
Recommended Products