Your cart is empty.
Your cart is empty.Enhance your audio experience with the Monoprice 5 Pairs of High-Quality Gold Plated Speaker Banana Plugs, Open Screw Type. These speaker connectors offer seamless connectivity, ensuring your sound system operates at its best. Versatility is at the core of these plugs, as they effortlessly accommodate bare wire, spades, and other banana plugs, granting you the freedom to customize your setup. Compatible with 12 to 18 AWG speaker wires, they provide a reliable link between your speakers and audio equipment. The thoughtful design incorporates color-coded black and red rings, simplifying the polarity setup and reducing the risk of mistakes during installation. The secure and positive contact with binding posts guarantees optimal signal transfer and minimizes signal loss, resulting in crisp and clear audio output. Crafted from corrosion-resistant, 24K gold-plated brass, these plugs promise long-lasting durability and efficient performance, even after extended use. Each order contains an impressive FIVE pairs, amounting to a total of 10 plugs, ensuring you have an ample supply for your audio connections. Elevate your sound system with these Monoprice speaker banana plugs, and revel in the improved sound quality and hassle-free installation they bring to your audio setup.
Dave E.
2025-08-31 13:17:46
They do what they are made for and do it very well. They are easy to use and well made.
saberback
2025-07-16 10:40:20
Just what was needed and good quality.
T. Kadrie
2025-07-15 18:56:45
A set of five pairs, for $10? That's a deal!No instructions -> Figuring them out isn't an obvious thing (given the sizable number of reviews/pix using the plug-stacking side hole, to mount the wires):It's pretty easy, checkout Ealan Osborne's "monoprice" YouTube video tip (strip _very little_: you want ~ 1/4" of bare wire sticking out past the end of the barrel, splaying out the individual wires across the barrel top, and avoid crossing them into the threads, then screw the plug into the barrel), and Barbara Chambers recommendation to _use two pairs of pliers_ to tighten the coarse thread connection down to _firmly_ grip those splayed wires.If you've got too much wire overlapped, and it's tearing the spayed wires off, strip back further, trim the end and try it again.You may have to attempt it a few times but that combo gets it done.I've got some old thick-insulation monster 12ga wire, that wouldn't even fit up the barrel, so I simply stripped enough to traverse the barrel + 1/4". Easy peasy.Just bought another set. :D
TubbyCakes
2025-07-02 10:00:24
I'm new to wiring and stuff for audio. I got these and followed a guide. They work great. Not issues so far. Even ordered some more for spares after.
Scot S.
2025-05-23 11:26:41
These make quick work of connecting bare speaker wires to your banana jack equipped amplifier or speakers. Simply put the bare wire through the hole and tighten the knurled knob. Then connect to the banana jacks on your amp or speakers. Added feature is that they are stackable. If you want to connect a second set of speakers, or bi-wire if your speakers are equipped for that, an additional set of these jacks plug into the first set.
Thomas Licciardello
2025-05-12 16:54:11
These are horrible. They do the job, but are not the easiest to get it right and they are sloppy. I bought these for my atmos speakers. All the rest in my system are Mediabridge. So much easier and neater. A bit more money, but worth it. I will replace these soon. See the difference in picture.
GERARD STROH
2025-04-30 13:12:19
From Gerard Stroh!!!!Great Banana Plugs For My Poweramps!!!!Thankyou***
Brenda Michalski
2025-03-16 18:38:55
I picked up several pairs of these a few months ago because they were low cost and well reviewed. They were easy to connect but I had problems with my speaker wires pulling out even when the plug was screwed all the way closed. This probably wouldn't be an issue with heavier gauge speaker wire or wires that had been tinned on the ends. My only real complaint is that one of the tips broke off in my receiver when I went to unplug the speaker recently. This is the first time I've unplugged it since installing these plugs and I'm careful to have plenty of slack on my speaker wires so they don't pull at the back of my reciever. I think it was just a manufacturing defect with that plug.The other thing to keep in mind is that these will add and inch or more to the depth of your receiver when plughed into the back. More if you connect the wires axially. This wasn't a problem for our old TV stand but our new stand is fairly shallow so my receiver sticks out slightly from the front. To be clear this wasn't an issue with these plugs, just our lack of planning in accommodating the increased depth do to the plugs and wires.I would buy these again if I were budget conscious and didn't mind replacing one or two if they fail. They work fine and make plugging my stereo in sooooo much easier. I'm going to keep the ones I have but if any more snap I'm going to cough up for some heavier duty and lower profile ones.
Joe B
2025-03-13 13:30:55
Not much to be said other than these are really good. The quality of the product is flawless and I loved how easy it was to connect wire to them. No soldering mess!
Misael Bazan
2025-03-10 19:32:49
Funcionan a la perfeccion y hacen lo que deben hacer.
Mark
2025-02-16 14:59:36
よã見ã¦ãªã„ã‹ã‚‰æ‚ªã„ã‚“ã ã‘ã©ã€ã‚±ãƒ¼ãƒ–ルを横ã‹ã‚‰æŒ‡ã™ã®ã§ã€ç›´è§’ã«æŠ˜ã‚Œæ›²ãŒã‚Šã‚¢ãƒ³ãƒ—ã«æŠœãå·®ã—ã™ã‚‹éš›ã¡ã‚‡ã£ã¨ä½¿ã„ã«ãã„。多分ã“ã‚Œã¯ã‚‚ã†è²·ã‚ãªã„ã¨æ€ã†ã€‚(別ã«è¦‹ã¤ã‘ãŸã®ã‚’使ã£ã¦ã‚‹ã—。^^;）ã¦ã£ãã‚Šä¸ã§ãã˜æ¢ã‚ã‹ã¨æ€ã£ã¦ãŸã‚“ã ã‘ã©ãªã。ãれ以外ã¯ä»Šã‚“ã¨ã“ã‚å•é¡Œãªã„ã‚“ã ã‘ã©...。
Bimmer_Man
2025-01-31 11:27:04
These Monoprice 5 Pairs of High-Quality Gold Plated Speaker Banana Plugs, Open Screw Type are very good value and work extremely well.
Prabhakaran
2025-01-26 12:19:26
perfect for my all avr, amp and spkrs
Recommended Products
