Your cart is empty.
Your cart is empty.Designed for trucks, vans, and SUVs, and CUVs, the Monroe Magnum steering stabilizer helps reduce vibrations that travel through the steering system before they get to the driver, improving control and driver fatigue in all driving conditions.
Customer
2025-08-29 16:04:07
No more death wobble, easy install, great price. Looks good and it works. Rides like new again
Jeepest Of All
2025-07-17 12:56:44
Fit perfectly for my stock suspension of my 01' Jeep XJ Cherokee. Keeps steering as stable as the original damper did. Happy with purchase!
CES
2025-06-12 15:31:32
Great replacement for stock OEM steering damper. Hardest part is removing the old one. Used a pitman puller to remove the old one after spraying it with PB Blaster and letting it sit for a while. Don't beat on this with a hammer go to a local auto store and rent a pitman puller if you don't have one. Once the old one was out took about 10 mins to install the new one. I torqued the bolts to 35 ft pounds as the directions said normal specs are 55 ft pounds. Frame bolt torqued to 55 ft pounds.
Dexter
2025-04-27 15:00:28
It does not come with a dust boot. I bought this assuming it would come with a dust boot and was let down. The product pictures do not show a dust boot but the product box I recieved does... now I have to source my own dust boot.Seems decent enough.
S. Wheeler
2025-04-23 18:43:39
The 27 year old factory steering dampener on my Jeep YJ wasn't really doing its job anymore, so I got this to replace it. It is much stiffer than the old worn out one! Driving feels much nicer now, and I don't have to fight with the steering wheel through every pothole on a bad road.The hard part was getting the old tapered bolt out of the tie rod. But once that was removed, installation of this new steering damper was straightforward and I had the jeep back together in 15-20 minutes. I used the included hardware, which was great of them to provide.So far so good! As I mentioned, steering is much better now, and compared to the old one, this felt much beefier than the original. Plus, not that it's necessarily an indicator of quality, but I like the fact this one has "Made in USA" stamped on the housing as well as the box it came in. Also nice that it looks OEM unlike a lot of those crazy aftermarket jeep parts out there.
drew
2025-03-20 18:11:12
Nice part. Easy install. If you have a Jeep TJ, this is the one you want. I've used many of these over the years / 200K miles. Works great. I change it out about every 20K miles. Tip: Leave the mounting stud (included in this kit) in the drag-link to save yourself the headache of pressing it out. This also removes the need to mess with the crown bolt & cotter pin on the ground side of the mounting stud. Just unbolt your existing damper from the engine facing (top) side of the drag-link, push off, reinstall new, and done! On the wheel side, once you remove the bolt and the existing damper, re-orientate the bolt so that the loose nut is on the front-bumper side. This also makes things easier for install and future replacement. Also, purchase the rubber boot and then re-use it until it falls apart and you need a new one. Make sure to put the rubber boot on prior to installing the damper!
charlie
2025-03-17 15:46:38
Considering it doesn't cost very much and is super easy to install i figured "why not." I know it's not really needed but it's not expensive so why not. They put it on there for a reason.
chris
2025-03-16 18:12:11
I got this 94 Jeep YJ around 1 1/2 year ago and it had been neglected by the very young owner and needed a lot a repairs and maintenance done. Since owning it I’ve replaced a whole lot, but couldn’t get the steering slip and death wobble to stop. I replaced all worn parts and everything was tight and still had the issues. I installed Ruff Stuff Speciality “The Cure†and it tightened up a lot of the slop, but death wobble wasn’t any better. I got the alignment dialed in and 90-98% of death wobble was gone. The steering stabilizer on it was bone stock (probably from 94) and shot. I couldn’t justify paying a lot of money for a brand name stabilizer that does the same thing, but costs 10 x’s more because it is painted a shiny color and has a flashy brand logo on it. Purchased this Monroe stabilizer, it arrived fast, and it fixed every bit of remaining issues I had. I had the Ruff Stuff Logo sticker I threw on it just for the heck of it (I don’t like stickers on the body and windows). Made a 400 +- mile trip this weekend and drove speeds averaging 50-82 mph without a single problem. I’d highly recommend this part for someone looking to solve steering trembles that they get from our pathetic roadways. I’d definitely buy this again.
Joe Scud
2025-03-13 15:02:54
Replaced old steering damper with this one. Perfect fit.
Enrique
2025-02-08 15:09:43
Quedo justo y se le quitó el Bamboleo a mi Grand cherokee 94.
Berufssoldat
2025-01-22 18:18:13
Was soll ich dazu sagen... siehe angehängtes Bild... der Dämpfer ist so grottig lackiert, dass einige Stellen einfach "vergessen" wurden... dort ist KEIN Lack, aber schon jede Menge Rost... für einen neuen Artikel unzumutbar, Qualitätskontrolle gleich null... der Aufdruck "made in USA" macht das ganze leider auch nicht besser, selbst Chinateile wären besser beschichtet...... puuh!
Geos GXP
2025-01-17 18:49:41
This item worked perfectly
R. T.
2025-01-13 13:34:24
Turned the steering my Jeep from a soggy drift that rattled my steering wheel into a much stiffer and acceptable ride. I'd definitely buy another if the need arose. Great product and takes a beating.
Recommended Products