Your cart is empty.
Your cart is empty.Product Description
Features
- This is newest upgraded stair light controller, with very many functions, can meet your any needs on DIY stair lighting.
- Max can support 32 steps dynamic light. Also can support SPI led strips to make side-way flow lighting or dream color lighting.
- With daylight sensor to control the system not work on day time.
- The program has been optimized, makes the controller very easy to handle.
- Support RF wall switch, can make all led strip light up continuously. 6. Nearly support all famous/ widely used IC on the market, which means it support nearly all SPI led strips.
Motion Sensor & Daylight Sensor：Motion sensor, which automatically senses the movement of a person and the stair light controller turns on the light; Daylight sensor, which controls the system to keep it from working during the day.
Various Modes： Stepping light, running light, stepping light + running light, stepping colour light, etc.
Special Function: dynamic step light + side-way flow light, brightness&color adjustable, speed control, delay time adjustable
Installation Notes:
- When the led strip light is plugged into the controller, be sure to find the socket of the corresponding serial number
- Be sure to connect the positive and negative poles, and the low-voltage current is DC12-24V
- It is recommended to bury the line in advance and install the lights when the stairs are decorated.
- The wiring needs to be disconnected, and the wiring cannot be plugged in to avoid short circuit
- The controller and sensor can be in the electric box
Package Included:
1x SP32 Controller
2x PIR sensor (1 meter)
2x PIR sensor extension cable (5 meters)
1x Daylight sensor (1 meter)
1 batch of tools and accessories (Square panel wall swtich is not included)
LED strip and power supply are NOT included !!!
Jonathan Demarks
2025-07-26 18:05:32
This is a great controller for stairway lights with a lot of configuration options and support for multiple kinds of strips. It's easy to configure and connect up and includes both a daylight sensor and two heat activated motion sensors for the top and bottom of the stairway. I have tested in it on my bench and have been quite impressed, but it will take a longish time for me to set this up for real.Two types of strips are supported: color LED and single and they all work as described. I personally don't like color options so went with a warm white set of strips which is very pleasing, and the brightness can be controlled to improve both the longevity of the LED strips and be easier on your eyes at night.There are only two concerns I had with this controller: (1) this is maybe minor, but I wish they had used and LCD instead of OLED. I feel like the display will burn out because it doesn't seem to automatically turn off. (2) Whatever power you plug in needs to 100% match the strip you use. It won't step down the power for a 5v strip (which I found out by exploding a strip instead of using a multimeter like I should have). If you have a 12v or 24v power brick, make sure you have 12v or 24v LED strips.Bear in mind that you will need a power supply, I recommend a power driver specifically for LEDs (usually called an LED driver) which will ensure adequately handled load. You will also need to do some basic math when purchasing the power supply to ensure it can run all your LEDs.4/5 - Requires some domain knowledge to setup currently and unknown lifespan of the OLED panel without another way to configure it. Existing issues pointed out in the review are easy to work around, but overall, it's a n awesome little controller at the advertised $60 price and right now there's a $10 coupon as well. It's way cheaper even than building your own controller.
Recommended Products