Your cart is empty.
Your cart is empty.Product Description
Applications:
- Automotive sensor and manifolds
- Microelectronics
- Insulating circuit boards
- Etching
- Liquid crystal
- High temperature powder coating
- Electrical circuit
- Space flight
- Laser
- Aviation
MS WGO High Temperature Heat Resistant Tape
Specification:
- Substrate material: Polyimide polymers film
- Glue Type: Silicone
- Substrate material thickness: 0.025mm
- Thickness with adhesive: 0.05mm
- Adhesive strength: 4.5N/25MM
- Tensile Strength: 115N/25mm
- Elongation: 50 %
- Temperature Range:-73°C – 260°C (-99°F - 500°F)
- Breakdown voltage:Min 4KV
High Temperature Heat Resistant Tape
- Leaves no residues after you peel them off
- High temperature application (over 450 F)
- They always holds tight throughout the tape’s rated temperature range
Leaves no residues
- No brittle after heating
- Heat resistant tape is a polyester film tape with a high temperature resistant adhesive.
- Used in various electrical/electronic product manufacturing processes due to its' excellent heat resistance and electrical insulation.
- Short period Heat Resistance:260℃
- Long period Heat Resistance:220℃
Suitable for a variety of scenarios：
liquid crystal
Microelectronics
Space flight
Electrical equipment
Radio Man
2025-08-29 14:33:13
Works perfectly to re-wrap the hot-end and thermistor wires on 3D printers.
Tyler Foster
2025-08-27 14:27:41
This is exactly as described and what I needed to prevent heat creep from my hot end to the thermistor on my 3D printer. I no longer am replacing thermistors regularly with proper protection in place. There is a lot of tape that comes with the order. I could have paid attention and ordered something a little wider, but this works well enough for my needs.
Stephen
2025-08-16 11:34:46
I bought this tape several months ago because the standard copper looking heat tape occasionally caused some of my projects to get a yellow stain on them. I have used this tape dozens of times with absolutely no issues. I like this narrow version as I rarely have a need for wider pieces. The only thing I'm not 100% sure about is this doesn't properly fit my tape dispenser. Either the tape core is slightly larger than 3 inches or the tape dispenser is slightly smaller than 3 inches. Either way a little foam tape easily solved the problem with the tape sliding on the dispenser, so I'll never bother trying to figure which item is to blame as it is very easily solved. Would definitely suggest others doing sublimation or other projects with a heat press give this take a try. This is monumentally cheaper than the Cricut branded heat tape.
Jacquie
2025-07-23 14:12:09
Llegaron bien...Muchas gracias
Emmi Ellami
2025-06-22 09:06:43
Updated: Stickiness not the best for tumblers. Had a lot of issues getting a tight hold with my sublimation paper. Tape doesn't have even a tiny bit of stretch to help. It's a good starter tape for beginners and doesn't harm fabrics for flat pressing... curved objects are another story.Original Review: Buying tape for heat pressing can be scary. You see so many out there that leave marks when pressing, and worse you buy some that had good reviews - and the tape was bad! Well, fret not. I bought this in clear and it was amazing. It adheres well. Be warned, once you go to peel it off, it doesn't stick back down the best. It is meant to freshly adhere and then come off upon peel. You may want to keep an extra little cut piece handy in case you're like me and peel the corner of your design to make sure it all transferred before pulling the entire thing. :) GOOD TAPE!
Eddy Cabrera
2025-05-25 10:19:12
A+
Karen9988
2025-05-20 15:58:18
This product worked great on my fabric under my heat press, and I would highly recomment it to anyone who needs to tape down their fabric to iron it! Works amazing!
Julie
2025-05-12 11:31:08
Works great for using with heat and my cricut press.
Christopher
2025-05-04 12:44:22
Hält was es verspricht
Frank Beck
2024-12-31 13:14:33
Schon mehrfach gekauft, Preis leistung super, machen was sie sollen, die Drucke während des Druckesan Ort und Stelle zu halten.
TundS
2024-12-27 14:48:34
Das Tape hebt unsere Sublimationspapiere beim Tastendruck sehr gut. Auch lassen die sich wieder rückstandslos entfernen, was sehr wichtig ist. Kann ich uneingeschränkt weiterempfehlen.
AHMED
2024-12-17 16:11:13
I love it
Handliches und praktisches Produkt
2024-11-26 16:53:25
Sehr gut! Macht was es soll
Recommended Products