Your cart is empty.
Your cart is empty.Product Description
The Great ANMOSVO Mud Guards for F150 2021 2022 2023 2024 - A Best Solution to Helped Your Car Reduce the Dirty!
Note - Compatible with F150 2021 2022 2023 2024 w/o OEM Fender Flares. Fit for F150 XL, XLT, Platinum, LARIAT, Tremor, King Ranch, Limited and doesn't fit Raptor. Please confirm whether your car is suitable for this fender before buying.
Definitely A Must for Your Car
- Without any protection, your truck is very susceptible to paint damage from open road debris kicked up by the tires, especially on the body door and rocker panels where the mud or sand bugle out. These will develop into larger areas of corrosion in soon which will damage the appearance of the car and require higher repair costs. So this splash guard will be your best choice from snow, salt, sand, rocks and other debris when driving.
A Nice Addition to Your F150
- Made of durable PP plastic material flexible and hard enough to withstand harsh road hazard. Not only splash guard keep the water and dirt from splashing up the side of car but also extend the service life of car paint and gives a nice look to the car.
Newest Upgrade
- Bolts right on. Sturdy and fit the profile of the fender perfectly and is there wide enough to cover the width of the tire, definitely cut down on the amount of mud, rocks and slush thrown up on the rocker panels.
How to Install the Rear/Front Wheel?
For Rear wheel:
Step 1: Use the tool to remove the car screws from the rear wheel.
Step 2: Align the drill holes and the upper part of the fender, then fix the fender on the upper part.
Step 3: Fix the mud flaps by the screws. (Please use the screws come with the package.)
For Front Wheel:
Step 1: Use the tool to remove the car screws from the front wheel, and remove the factory covers.
Step 2: Make the mud flaps catch the edge of car, then fix the fender on the upper part.
Step 3: Fix the mud flaps by the screws. (Please use the original screws to fix it.)
Tips:
1. Please make sure have the clearance between the tire and wheel to install.
2. Before installing, clean the area where the mud flaps will be installed.
3: You can almost get the rear guards to line up after removing the retainer pins on the truck.
Flexible & Hard
Feature durable PP plastic material. It is flexible and hard enough to withstand harsh road hazard.
Stay in Place
Designed to grip the edge of car. Even long time driving run, all the mud flaps will still stay in place.
Easy to Install
Pre-drilled holes prevent shedding;Easy to apply without any modifications.
package Including:
4 x Mud Flaps Splash Guards
10 x Screws Clips
Laura
2025-09-05 12:46:34
They fit well on my 2023 Tundra hybrid when I figured out how they fit on. No directions, which could have speed up the process. They are marked like RR and LR but I had to figure out the the textured side faces rear on each one. I was also irritated that the rear ones had a need for 2 extra screws, until I was tossing out the box and bags and discovered a tiny bag that had 6 extra screws in one plastic bag that held 2 flaps. They fit nicely into the unused plastic inserts that the Tundra already had in the right place. They may not be rust resistant, we will see, but not a biggy. I can always buy stainless later. A 10mm 1/4 socket wrench made it an easy and quick install of about 5 minutes each when all was figured out. No need to raise rear or change tire orientation. Just parked. Looks good.
Customer
2025-08-30 11:01:33
Perfect fit and easy installation
spike1
2025-08-08 17:24:26
I like they fit pretty good on my 2024 F150 FX4 Super-crew. No directions, but pretty easy to figure out. Very solid. They only thing I dislike about the set of four is the bottom holes line up nicely, but no upper holes to match the holes in the flaps. Still very solid installation.
Customer
2025-08-05 15:34:35
I was tired of leaving a quarter mile of spray behind me when it rained so I wanted to get some mud flaps.I assumed there would be some drilling or complexity to install these, I was wrong. So easy to install. They use the existing 10mm screws and available/existingthreaded holes. Everything lined up perfectly on my 22 Tundra. They are labeled with front/back, left/right, so make sure you use the correct one. Also, they come with left (front and back) in one bag, right in another, don't worry. Also, they came with one bag of 8 black screws, you shouldn't even need that many. My front used existing 10mm bolts that were already there. Each back flap required 2 from the bolts they provided. All the new bolts aligned with existing holes, no drilling. I will say that the truck fenders have some play, so I did have to do some minor wiggling to get everything to align. Each mud flap has a tab that goes up into the bottom of the fender so if you have a drill/driver with a philips bit, you can get those in easy really quick with a little speed from your drill/driver.Super impressed overall with these, would highly recommend.Took me about 20 minutes to install with no help or instructions.
Chris B
2025-08-02 14:50:00
I thought 1st set was my fault that they broke.. backed into a snow mound while parking. This time not even my fault. These mud flaps are solid plastic and what happens when plastic gets cold... the become brittle and break. Snow build up and they snapped.
Joseph McGuyver
2025-07-21 11:36:37
Pretty easy install - holes line up. Bolts for mud flaps interfere with front fender liner - just remove liner clips and bolts will poke through. Flaps holding up to carwash brushes OK.Wish the black plastic was blacker next to black paint, but overall flaps look great to all but the most critical eye.
Sam C.
2025-06-30 12:04:46
Not as easy to install and I couldn’t find the installation video online. Be careful of the tab that’s located on the top portion of the guard, it’s short so if you don’t get it behind the fender on the first couple of times, it gets weaker. One side went on great but the other side was troublesome. Good value for the money though.
tim neds
2025-06-07 17:11:42
The mud flaps are a hard plastic and not bendable. The supplied screws are the wrong threads and larger. the predrilled mud flap holes do not line up with existing holes, unless you remove some plastic pieces on the front wheels, the back wheels were much easier to install. It took me about 3 hours to install all four flaps, as I had to modify the front for proper adjustment. They look good. There were no directions in the box, and I couldn’t find an online video.
Ali Bikhan
2025-04-09 12:13:34
Nice mud flaps. Fits well and fairly easy to install with the right tools and own research. However one huge drawback with these, there is no instructions on how to install them, which makes no sense. I had to watch a YouTube video on how to do it. Tip to seller, instructions are mandatory.
Customer
2025-03-25 18:45:58
Product mentions that it will not cause detrimental damage to any existing vehicle parts. Went to install it on a completely stock 2022 F150. I had to modify the front plastic skirting for the flaps to fit. A groove cut out that was intended to allow the skirting to sit inside the flap did not work with the skirt's shape. I had to cut the skirt in half to get it to clip back on and allow the flap to install. Also the "nuts" (more like metal clip with a threaded hole in it) was threaded with the wrong thread count. I had to force the nuts onto the bolt, thus re-threading the clips. All in all, everything installed but there was a lot of extra work and hassle.
ytwytw
2025-03-14 21:33:09
installed and it works, there is no manual how to install it but eventually figured out afterwards.The flaps appears good quality but waiting for snow day to see if it will survive
Guillermo
2025-03-01 18:02:58
Really easy to install, fit like a glove
Customer
2025-01-06 18:16:13
sadapte bien a larriere mais pas a lavant ils sont croche a lavant mauvais moulage
Recommended Products
$29.38
$ 12 .99 $12.99