Your cart is empty.
Your cart is empty.Product Description
dirk blevins
2025-09-05 16:47:55
I tried to find machine heads to fit a Peavey Fury IV - 1980 model. It was impossible on a budget. I took a chance on these after looking at the mechanical drawings. The top two holes aligned well. The bottom two holes didn’t and I had to drill some new holes. The old holes were exposed slightly and I could have filled them but I haven’t yet. However they work fine and were affordable which is what I was targeting. The old ferrules worked perfectly as well. Anyway hope this helps.
JStine
2025-08-28 20:54:35
These are very good quality tuners. These were used on a Squier bass. The screw holes did not line up so I had to fill the old holes and make new ones but the tuners rock!
3d
2025-08-25 11:09:53
Bushings are about 18mm. This is the MOST important measurement about the tuners, and its nowhere to be found in the description.It came with just enough screws (16), but one screw was a different size. had to use another screw from my spare parts.Overall, they're a little stiff, but work fine.
Luke Alamo
2025-08-22 18:14:02
Tuners for my Glarry bass work great. The chrome plating was OK, not perfect.
Norma Gomez
2025-08-11 20:08:38
Like many after market parts, you may need to plug old mounting holes and drill new ones. Very easy do do. These fit my Squire PJ bass just fine.
Julie Hustead
2025-08-01 13:47:29
I had to fill the mounting holes with a tiny dowel and super glue. The center piece or bushing was slightly smaller than the the MIM tuner holes and I used 4 “small†drops of super glue to hold and center the bushing in place. Then I carefully marked and drilled new holes. I also didn’t trust the mounting screws and bought new mounting screws from ace hardware.Otherwise, the quality of the tuners were about the same as the tuners that came from the factory MIM jazz bass. It’s NOT an upgrade in any way. This is a way to get black tuners or replace broken or worn out tuners.DO NOT put these on an American fender…Ever! I wouldn’t put these on a new neck either. They work good, they hold their tune, they are a little rough, the paint scratches easy. I used the same tuners with 2R and 2L with a built from scratch and they work great.You are buying these because they are affordable not because they are an upgrade. You want nice tuners… save up your money.
Gumby Ramone
2025-06-30 14:48:33
Perfectly fit my Glarry P. Bass! I’m very happy to get rid of the really bad tuners the bass came with. These look almost exactly the same except they work better and feel a lot sturdier.
Dave G.
2025-06-26 17:52:27
The image shows machine heads identical to my Music Man. these are fairly different. larger in size and the base is also different with wider set screws holes. You will have to re-drill holes into your instrument to use these. They get the job done in a pinch, but I will be replacing the one I used asap with a higher quality. I was expecting the lower quality, but not for them to be this different. THE IMAGE IS A STOCK PHOTO FROM HIGHER QUALITY PARTS, BE ADVISED.
z@buton
2025-06-11 13:26:06
æ¯åã®ãƒ™ãƒ¼ã‚¹ã®ç‚ºã«è³¼å…¥ã€äº¤æ›ã—ã¦ã¿ã¾ã—ãŸã€‚ã‚ãŸãã—楽器ã«é–¢ã—ã¦ã¯çŸ¥è˜ã‚¼ãƒã§ã™ãŒã€ãƒã‚¸ã‚„工具を扱ã†ã®ã¯å¥½ããªæ–¹ãªã®ã§ã€ãƒãƒƒãƒˆã§æ¤œç´¢ã—ã¾ãã£ã¦ã‚„ã£ã¦ã¿ã¾ã—ãŸã€‚ãŠãらãã“ã®å•†å“を購入ã•ã‚Œã‚‹æ–¹ã¯çŸ¥è˜ã®ã‚ã‚‹æ–¹ã‹ã€çŸ¥è˜ã®ã‚ã‚‹æ–¹ã«äº¤æ›ã‚’ä¾é ¼ã•ã‚Œã‚‹æ–¹ãŒã»ã¨ã‚“ã©ã ã¨æ€ã†ã®ã§ã€ã“ã“ã§ã¯äº¤æ›æ–¹æ³•ã¯è¨˜è¼‰ã—ã¾ã›ã‚“ãŒã€äº¤æ›ä½œæ¥ä¸ã«å¼¦ã®å·»ã方やã€ãƒ–リッジã€ã‚µãƒ‰ãƒ«ã®å½¹ç›®ã‚’知ã£ãŸãらã„ã®ãƒ‰ç´ 人ã§ã‚‚交æ›ã§ãã¾ã—ãŸã€‚ã¡ãªã¿ã«ç”»åƒã«å†™ã£ã¦ã„ã‚‹ã¤ã¾ã‚ˆã†ã˜ã¯ã€ä½¿ç”¨ã—ãªã„ãƒã‚¸ç©´ã‚’埋ã‚ã¦ã„ã‚‹ã¨ã“ã‚ã§ã™ã€‚æ—¢è¨ã®ã‚®ã‚¢ãŒå‰²ã‚Œã¦ã¾ã¨ã‚‚ã«èª¿å¼¦ã§ããªã„ã§ã„ãŸã®ã§ã€äº¤æ›ã—ã¦ä½¿ãˆã‚‹æ§˜ã«ãªã‚Šã€æ¯åも喜んã§ãã‚Œã¾ã—ãŸã€‚
Björn Fuhlendorf
2025-06-04 11:08:45
Für den Preis absolut okay
Christopher S
2025-06-01 12:45:09
Usual quick delivery, Musiclily make decent quality fairly priced gear. These are great for the money, do the job and look good. So far they seem to be holding tune no problem. Got these for a Harley Benton MB4 project and they fitted perfectly. Would recommend.
Skrammlis
2025-05-22 12:37:42
Helt ok än så länge
Cliente
2025-05-17 09:41:43
Para lo que piden pues va de maravilla! Producto recomendado
dirk blevins
2025-05-12 12:42:53
I tried to find machine heads to fit a Peavey Fury IV - 1980 model. It was impossible on a budget. I took a chance on these after looking at the mechanical drawings. The top two holes aligned well. The bottom two holes didn’t and I had to drill some new holes. The old holes were exposed slightly and I could have filled them but I haven’t yet. However they work fine and were affordable which is what I was targeting. The old ferrules worked perfectly as well. Anyway hope this helps.
JStine
2025-05-08 09:35:25
These are very good quality tuners. These were used on a Squier bass. The screw holes did not line up so I had to fill the old holes and make new ones but the tuners rock!
3d
2025-05-05 14:57:00
Bushings are about 18mm. This is the MOST important measurement about the tuners, and its nowhere to be found in the description.It came with just enough screws (16), but one screw was a different size. had to use another screw from my spare parts.Overall, they're a little stiff, but work fine.
Luke Alamo
2025-04-21 12:35:20
Tuners for my Glarry bass work great. The chrome plating was OK, not perfect.
Norma Gomez
2025-04-19 10:35:48
Like many after market parts, you may need to plug old mounting holes and drill new ones. Very easy do do. These fit my Squire PJ bass just fine.
Julie Hustead
2025-04-14 21:17:17
I had to fill the mounting holes with a tiny dowel and super glue. The center piece or bushing was slightly smaller than the the MIM tuner holes and I used 4 “small†drops of super glue to hold and center the bushing in place. Then I carefully marked and drilled new holes. I also didn’t trust the mounting screws and bought new mounting screws from ace hardware.Otherwise, the quality of the tuners were about the same as the tuners that came from the factory MIM jazz bass. It’s NOT an upgrade in any way. This is a way to get black tuners or replace broken or worn out tuners.DO NOT put these on an American fender…Ever! I wouldn’t put these on a new neck either. They work good, they hold their tune, they are a little rough, the paint scratches easy. I used the same tuners with 2R and 2L with a built from scratch and they work great.You are buying these because they are affordable not because they are an upgrade. You want nice tuners… save up your money.
Gumby Ramone
2025-04-11 12:29:34
Perfectly fit my Glarry P. Bass! I’m very happy to get rid of the really bad tuners the bass came with. These look almost exactly the same except they work better and feel a lot sturdier.
Dave G.
2025-03-23 18:38:24
The image shows machine heads identical to my Music Man. these are fairly different. larger in size and the base is also different with wider set screws holes. You will have to re-drill holes into your instrument to use these. They get the job done in a pinch, but I will be replacing the one I used asap with a higher quality. I was expecting the lower quality, but not for them to be this different. THE IMAGE IS A STOCK PHOTO FROM HIGHER QUALITY PARTS, BE ADVISED.
z@buton
2025-02-20 18:26:07
æ¯åã®ãƒ™ãƒ¼ã‚¹ã®ç‚ºã«è³¼å…¥ã€äº¤æ›ã—ã¦ã¿ã¾ã—ãŸã€‚ã‚ãŸãã—楽器ã«é–¢ã—ã¦ã¯çŸ¥è˜ã‚¼ãƒã§ã™ãŒã€ãƒã‚¸ã‚„工具を扱ã†ã®ã¯å¥½ããªæ–¹ãªã®ã§ã€ãƒãƒƒãƒˆã§æ¤œç´¢ã—ã¾ãã£ã¦ã‚„ã£ã¦ã¿ã¾ã—ãŸã€‚ãŠãらãã“ã®å•†å“を購入ã•ã‚Œã‚‹æ–¹ã¯çŸ¥è˜ã®ã‚ã‚‹æ–¹ã‹ã€çŸ¥è˜ã®ã‚ã‚‹æ–¹ã«äº¤æ›ã‚’ä¾é ¼ã•ã‚Œã‚‹æ–¹ãŒã»ã¨ã‚“ã©ã ã¨æ€ã†ã®ã§ã€ã“ã“ã§ã¯äº¤æ›æ–¹æ³•ã¯è¨˜è¼‰ã—ã¾ã›ã‚“ãŒã€äº¤æ›ä½œæ¥ä¸ã«å¼¦ã®å·»ã方やã€ãƒ–リッジã€ã‚µãƒ‰ãƒ«ã®å½¹ç›®ã‚’知ã£ãŸãらã„ã®ãƒ‰ç´ 人ã§ã‚‚交æ›ã§ãã¾ã—ãŸã€‚ã¡ãªã¿ã«ç”»åƒã«å†™ã£ã¦ã„ã‚‹ã¤ã¾ã‚ˆã†ã˜ã¯ã€ä½¿ç”¨ã—ãªã„ãƒã‚¸ç©´ã‚’埋ã‚ã¦ã„ã‚‹ã¨ã“ã‚ã§ã™ã€‚æ—¢è¨ã®ã‚®ã‚¢ãŒå‰²ã‚Œã¦ã¾ã¨ã‚‚ã«èª¿å¼¦ã§ããªã„ã§ã„ãŸã®ã§ã€äº¤æ›ã—ã¦ä½¿ãˆã‚‹æ§˜ã«ãªã‚Šã€æ¯åも喜んã§ãã‚Œã¾ã—ãŸã€‚
Björn Fuhlendorf
2025-02-17 11:57:31
Für den Preis absolut okay
Christopher S
2025-02-04 14:39:57
Usual quick delivery, Musiclily make decent quality fairly priced gear. These are great for the money, do the job and look good. So far they seem to be holding tune no problem. Got these for a Harley Benton MB4 project and they fitted perfectly. Would recommend.
Skrammlis
2025-01-26 19:22:41
Helt ok än så länge
Cliente
2025-01-20 16:02:28
Para lo que piden pues va de maravilla! Producto recomendado
Recommended Products