Shopping Cart

Your cart is empty.

Your cart is empty.

Musiclily Pro Slotted Ebony Acoustic Guitar Bridge Pins, Black with 3mm White Pearl Shell Dot (Set of 6)

Free shipping on orders over $29.99

$11.11

$ 4 .99 $4.99

In Stock

1.Color:White Bone


About this item

  • Fits most acoustic guitar
  • Made of real ebony with white 3mm pearl dot on the head
  • Overall length: 28mm (1-7/64 inch), top head diameter: 8mm (5/16 inch), bottom diameter: 4.3mm (11/64 inch)
  • Pre-slotted, easy to install
  • Package included: 6 Pcs Bridge Pins



Uncle Eric's Guitar Recue and Refurbish
2025-08-05 14:57:02
I recently installed the Musiclily Slotted Folk Acoustic Guitar Bone Bridge End Pins on my Epiphone PR-100 WR, and I’m thoroughly impressed with the results. The fit was perfect, with no modifications needed, and the bone material significantly enhanced the guitar's sustain and clarity, giving it a more vibrant and fuller sound compared to the stock plastic pins.Visually, the bright white color adds a striking accent to the guitar, giving it a fresh and distinctive look. The slotted design also makes string changes easier, which is a nice bonus. These bridge pins are a simple yet highly effective upgrade that noticeably improves both the tone and appearance of the instrument.For the price, the quality is exceptional, and they’re definitely a worthwhile investment for anyone looking to enhance their acoustic guitar.
Garret
2025-07-31 14:45:33
I bought these for a vintage C. F. Mountain acoustic guitar (Martin knock off made in Japan). They work great after a bit of sanding with 120 grit sand paper.The tone is much brighter than the plastic pins they replaced. Just be ready for a few hours of sanding if your guitar has non-standard size pins.
Amanda Stark
2025-07-29 18:08:26
Nice little set of solid ebony bridge pins. The ebony is high quality. The mother of pearl inlays are nice. I was afraid that these might be crappy based on the low price- however I couldn’t be more impressed. Often cheap ebony bridge pins seem to be dried right out, or made from inferior wood. But these things are super nice. They made a difference in tone as well. I have a 2005 Martin JC-16RE Aura, and it’s a great guitar but it came with crappy plastic bridge pins and saddle. These things make a larger difference than you might be expecting. Plus, they just look and feel more premium. 10/10 would buy again.
L. Lee
2025-06-24 18:28:09
They fit pretty good. I’ll need to sand down the top two pins for a perfect fit. The bulb size is a tad larger than I prefer. Changing from plastic to bone improves the sound a touch. I’ve tried ebony pins on my Martins, and the bone pins produce a clearer sound. Though not too different sounding than factory plastic pins. More for cosmetics. I am satisfied with this purchase.
Jeff Bobrofsky
2025-06-14 16:25:35
Many positive reviews and the fact that they are rated as Amazon Choice drew me to this product. They fit my Taylor A.D. 27E flame top and GS Mini mahogany perfectly, no sanding required. They are a significant upgrade, visually, and in tone. Why Taylor still uses plastic pins on their quality instruments is beyond me. The MusicLily Ebony, pictured above on the left, has a larger pinhead and a larger shoulder. it sits higher than the factory pins so they are much easier to extract when changing strings. You won’t find a more affordable upgrade for your quality guitar. Buy these, you won’t be disappointed.
J. Lin
2025-06-05 15:30:56
These are good wood pins that are sized about industry standard. Style is not too fancy and fit the style of the guitar. My factory pins are 5.2mm at the top of the shaft tapering to 3.4mm (holes are 5.0mm at the top). The pins stood so low that standard pin tools won't grab anything and you have to take them out by putting your hand through the sound hole and pushing up from inside. These stood proud about half the height, and needed a good 25-35 turns on the reamer to fit these where I like, but I do appreciate factory pins being smaller by default so you at least get one opportunity to rework with "standard" industry pins. Reamers aren't too expensive, and you can set new pins to your liking.
jenksdrummer
2025-05-24 17:26:44
Could entirely be that Taylor, from the factory, made the pin holes in the bridge too big. My OEM pins fit loose enough that I can have to be careful restringing the guitar because they'll easily pull out all on their own, but, once it's done up and under tension, they seem to hold, likely the ball end is wedging them in place. Even tried soaking them in water in the hopes they'd expand a bit and no luck there.So, I bought these as it was implied, they might be a touch oversized; seems not at least in the important part. The top part, above the bridge is a bit bigger and a bit higher profile. That said, they look nice, they are finished well, and appear to be consistently done; but I bought 2 sets for a 12 string and won't be using them unless I break one of my OE pins - which, considering they fall out when there's no tension, seems very unlikely.
Diana P
2025-05-15 21:40:40
Thanks to an Amazon reviewer's recommendation, I bought these pins for my new Sigma acoustic guitar. Just as promised, they fit perfectly and without my having to sand the pins down or make the pin holes larger. It's always guesswork when buying new bridge pins because you never know if they will fit. As an added touch, the seller Musiclily threw in a pick. Usually a free pick is not much to get excited about but this pick is on thick/heavy side and produces a very nice tone on my guitar (not too bright, not too noisy). Overall, I highly recommend these pins but you may want to ask in Q & A area beforehand to see if someone has used these pins on the same or similar guitar that you have.
Jesús Zaldivar
2025-05-08 16:47:58
Muy buena calidad, sin embargo no le queda a las guitarras Fender ya que su diámetro es mayor a 4.93mm
æ°´è°·
2025-03-14 14:26:09
ピン同士をぶつけると甲高い音がなりしっかりと中が詰まっていると感じられました。また私のYAMAHA FG-600にはポン付けで使用でき、音のクオリティが上がったので大満足です。
ezfastway
2025-02-23 11:06:05
Avendo perso uno dei 6 della mia chitarra, ho sostituito interamente il set con questo. Di buona fattura, impreziositi dalla madreperla fanno la loro bella figura. Ottima funzionalità sostituiscono egregiamente quelli originali.
Ben Trio
2025-01-28 18:54:28
Good pins
Niels
2024-11-21 09:52:23
it took some work as I had to sand the pins down to fit, but it is worth it. The guitar sounds noticably brighter and louder compared to the plastic pins.
Recommended Products