Your cart is empty.
Your cart is empty.Product Description
This mini hobby table saw can not work continuously for a long time, it is recommended to work for no more than 2 hours at a time. Please rest for 30 minutes before continuing to work.
This is a very small table saw, as big as your palm. Please check the size before purchase.
-
Thickened Aluminum Table
Stable operation, not easy to deform, precise control, laser graduation, and not easy to wear.
Aluminum table top: Length 7.87inch/20cm, width 6.3inch/16cm, thickness 0.2inch/5mm.
Not suitable for cutting hard materials, such as hard wood, hard stone, hard jade, hard plastic, etc.
-
Fully enclosed thickened metal body
10mm belt drive is adopted to prevent breakage.
Powerful motor drive: enhanced 775 motor. Solid bearing, double NSK bearings, shock absorption and noise reduction.
Fully Enclosed Metal Shell: Upgraded thickened shell, dustproof, shockproof and sturdy.
-
Aluminum backer
Please align the scales on both sides when installing the backer, then tighten the screws.
0-11cm clear scale, Maximum cut width: 4.33 inch/11 cm
Not suitable for cutting hard materials, such as hard wood, hard stone, hard jade, hard plastic, etc.
-
Aluminum angle push ruler
0-90°adjustable, laser radium engraving, long-term use, can achieve angle cutting.
You can adjust to the required angle by loosening the screw, and then tighten the screw to fix the angle.
-
Precision Drill Chuck
The clamping range is 0.0118-0.256 inch (0.3-6.5 mm). You can use a key wrench to rotate the collet to adjust the tightness.
NOTE: When using the drill attachment, please lower the height of the saw blade a little, otherwise the drill chuck may rub against the tabletop.
-
Dust Suction Port Design
Can be connected to a vacuum cleaner to suck dust directly when cutting.
This mini table saw is not suitable for cutting hard materials.
-
-
Not suitable for cutting hard materials, such as hard wood, hard stone, hard jade, hard plastic, etc.
-
HDD
2025-06-30 18:55:49
I love this little table saw. It is great for my craft projects. It is easy to use and performs better than I expected.Update: Had a small problem with this saw. Contacted the seller and they quickly sent the needed parts (plus extras) under warranty.I highly recommend this seller. Excellent customer service.
marc bovasso
2025-05-30 10:21:58
This tiny table saw is exactly what I wanted. I Scratch build terrain and features for TTRPGs and was hand cutting wood pieces. I am a poor "cutter" and have been unhappy with the inaccuracy of my pieces. After reviewing many of these mini saws, i got this one and so far it is perfect. It even has an arbor for adding a sanding pad to. I use it to cut popsicle sticks, small diameter dowels and other small pieces generally between 3/8" and 3/16" sizes. This cuts them cleanly with no binding or dragging.
Kindle Customer
2025-04-21 13:21:57
First off, this little thing is adorable, and perfect for the crafter or hobbyist; it works as it should and cuts smoothly. Right off the bat though, there are two issues: 1) make sure you don't have the blade height as high as it will go. I did that and the motor kept pulling, stopping, and going again. Upon inspection, there's actually no stopping point from the belt to the underside of the table top, so the belt was just rubbing away on the bottom of the saw table. Refer to the picture- on the left of the machine, if you can see the light then the belt is good, no need to take the table off every time you adjust. 2) The wing nut is too big to tighten the angle ruler on a 0 degree angle. Technically that's not a real problem, as you can build a jig or fence to give yourself whatever sized pieces you need, but still, that's something that was overlooked in the design. Overall though, I still give it 4 stars for what it is. I plan to make gifts as coasters, trivets, and probably christmas ornaments as gifts with this. Second pic is a tic-tac-toe board I made out of scrap pallet wood while testing this out.
Customer
2025-03-25 11:43:15
Wonderful item. A great addition to my craft tools
David
2025-01-23 21:26:56
I purchased this, primarily for cutting PC boards but I'm sure I'll find other uses for it. It was very easy to assemble a couple parts. To test it, I changed the saw blade to the diamond saw (came with it), lowered the blade to the appropriate height (a nice feature) and did a couple cuts on a copper clad pc board. The cuts were clean & precise. The guide and push bar held true (weren't sloppy) making fine straight cuts. I added the sanding wheel to the chuck arbor on the side and sanded the fine copper burrs. Job well done.No, you can't build a house with this, but for small hobby, precise cutting it's the ticket.
Jay McMillen
2024-12-27 12:29:03
Yes, this is small, but does the job on small projects. I have used it with 1/4†poplar and it melts right through. Remember to insert kerf wedge when ripping!!! I love this saw.
RA781
2024-12-22 14:53:31
I make small gamin project with 1/8" wood, etc. This saw binds all the time. I read all the reviews and belief they're all cutting basalt wood. This saw can't handle anything to include 1/8" pine. Buyers be aware - look elsewhere.
Tammy
2024-12-01 11:05:41
This little saw is great for cutting small pieces. Not a whole lot of power, and will stop if something is to big. I use it for cutting small pieces of drift wood 🪵
Recommended Products