Your cart is empty.
Your cart is empty.The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. It‘s just as versatile in use, as it is tremendously convenient in size. Make rip cuts of up to 11“ (280 mm), cross-cut widths of up to 17-3/4“ (450 mm) and bevel cuts of -10° to 47°. The unique digital operation produces results with maximum precision—accuracy within a tenth of a millimeter (1/256“). The 2x18 V dual-battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won‘t notice any difference compared with a corded tablesaw. Together with the UG-CSC-SYS underframe, you have the perfect work table with built-in support for ripping and cross-cutting, and it collapses for easy transport from the vehicle to the site. The CSC SYS 50: The ultimate in portable precision. Strengths and benefits › Versatile: Parallel cuts up to 11“ (280 mm); cross cut width of up to 17-3/4“ (450 mm). Bevel cuts from -10° to 47° › Practical: At a cutting height of up to 1-3/8“ (35 mm), through to bevel cuts down to -10°; ideal for back-beveling filler strips › Compact and mobile: Can be easily carried with one hand and neatly stored in a Systainer format. Even easier to transport with the wheeled UG-CSC-SYS underframe › Extreme precision: The height and bevel angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimeter (1/256“) › Repeatable cuts are easy: The height and angle (mm and inches) are set parallax-free via the digital display, i.e., more accurately than any visual judgement. Repeatable cuts are a sure thing › Convenient: Four saw blade positions can be saved and selected via the digital display › Highly precise rip fence: Robust rip fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results › Highly precise angles: The miter gauge is optimally aligned and centrally clamped via a groove on the sliding table. For miter angles between -70° and +70°
Gadget Crazy
2025-09-04 18:33:01
I am delighted with the accuracy of the tool in every regard. It is a joy to work with. The cuts are so smooth and easily that there are no saw marks that would need to be sanded out. The sled works very smoothly and accurately. The miter guide is dead accurate without any calibration necessary. The same for the setting of the desired saw blade angle. The control knob and switches work perfectly. I do wish that an out-feed table extension option would be available. And I wish that a fine adjustment feature for the fence would be available. On rare occasions, it would be nice to have an attachment to make the fence taller, for example to make a groove in the edge of a 1X6" or wider board. The batteries fit well, but it takes some experience to get the hang of holding them at just the right angle for them to slide into place -- just a nit pick on my part. All in all, I find the saw to be a joy to use.
Zac Martin
2025-08-18 17:44:22
They always seem to make everything better. This saw is no different. Very impressed with the capability.
L & S
2025-06-12 18:13:41
Bought as a last minute tax deduction, now I don't know how I'd live without. As a trim carpenter it cuts everything I need, compact and easy to transport. Goes with me rather than having to go out to the shop or outside to cut on a bigger saw. Excellent dust collection into supplied bag. Motorized blade height is good for repetition but slow for most height changes; same goes for angle adjustment. As always with festool, nice storage. I love it. Batteries last all day.
Alexandr Marin
2025-05-05 15:13:29
Excellent device for work. True, there is one drawback. Dust removal system. Of course, they did not finish it. It cuts accurately. It is very pleasant to work with such a device. But when you saw, some of the sawdust flies at you from the disk. This is especially unpleasant when you saw a long longitudinal cut. 7-8 feet. You look as if sawdust was poured on you from the front. It can even get into your eyes. But the quality of the cut and the accuracy of the angles are high. It works out its money completely. At the moment, there are no equals to it, among table saws.
Frankie
2025-02-05 14:55:21
I watched tons of YouTube videos about this before purchasing. I do love that this is a lightweight table saw, but the fence is useless as it’s not straight when locking into place. I think I can make some shim to account for it, but it’s off by about a degree, which if this was a 200$ table saw, no big deal. But the most expensive portable table saw at 2000, kind of unacceptable.I also wish this was flex fuel meaning battery or plug in. This is my only Festool battery powered product and I only have one set of batteries. To the people who say it lasts all day, it doesn’t. It lasts maybe 1.5 hours-2hours. Since it’s battery you also have to manually turn on your vacuum rather than plug it into it.
Recommended Products
