This manual camera slider is easy to setup on flat surfaces such as the desk.The feet have a convenient design allowing you to fine tune the angle of the slider.The sliding action is quite smooth, without unwanted vibrations. Being a manual slider, the operator needs to control the speed manually.For the affordable price, this is one of the best executed manual sliders I've seen, which is great for casual usage.

This camera slider is a fantastic addition for anyone serious about videography. The combination of carbon fiber and aluminum keeps it lightweight yet sturdy, easily supporting up to 4.4 pounds. The adjustable legs are a lifesaver, allowing for quick adjustments on uneven surfaces. The sliding mechanism is impressively smooth and quiet, thanks to the precision bearings, making it perfect for capturing seamless shots. I love the versatility it offers, with multiple mounting options for different devices, including phones and action cameras. The included phone clamp and action camera mount are handy, and the whole setup fits neatly in the carrying bag, making it super portable for shoots on the go.

This is a fantastic addition to my collection of equipment that I use during cooking videos. Being able to move, slide it around, and easily access a different angle is very helpful. Given its lightweight, it's easy for me to carry it to where I need to, and its smooth motion takes the shakiness out. Setting this up is easy, whether by itself or on a tripod, it just works, as there are enough slots to hook it up where I need it. I kind of wish it was a bit longer, it would make some angles and effects a bit more awesome but it still works. I was disappointed with the last couple of products I got from Neewer but not this one, I am very happy with this.

While there are motorized slides out there that are way cooler in theory a lot of them are heavy, loud, and have glitches even when they cost thousands of dollars. This camera slider is lightweight and can sit on even my cheapest tripod without issue, or with the fold out feet simply sit on a floor or table. It also makes absolutely NO NOISE while being slid from side to side which is absolute perfection for video shoots with audio straight through the camera or even with a shotgun mic mounted to it. The smoothness of the sliding action itself is also extremely clean and without hitching with a couple of other NEEWER attachements you can get some really great shots. I would list or link them here but I don't think that works haha, I will say that if you want a slider that is worth the price and has great performance this will definitely give you what you are looking for. I keep being reminded why I love NEEWER, they just keep elevating their products and delivering quality craftsmanship.

The NEEWER 16in/40cm Carbon Fiber Camera Slider is an exceptional addition to any videographer's kit! The build quality is top-notch, with its lightweight yet sturdy carbon fiber construction making it incredibly portable without compromising on stability. The smooth sliding motion ensures professional-quality shots, and the included 360° ball head allows for versatile camera angles. Whether you're using a DSLR, smartphone, or action camera, the adjustable phone clamp and action camera mount make it compatible with various devices. Setup is easy, and it delivers impressive results for time-lapses, product videos, or cinematic movements. It's perfect for both beginners and pros looking to add dynamic motion to their shots. Highly recommend for its versatility and smooth performance!

Camera sliders have been around for years now. This one is relatively short, which can be an advantage depending on your shoot. For example, this size will help a lot with camera moves in a vehicle and other places where space is limited. This company is like the go-to for budget filmmaking gear. Never been disappointed.

Slider mounts on my tripod and gives me the Hollywood dolly shot for product videos and field shoots. Easy to use and comes in a nice case. Recommended

The video tool I’ve been missing! This tool is incredible for filming smooth shots. So easy to attach of multiple different tripods and the multiple mounts means I can use my large canon or my iPhone. The glides are smooth and I couldn’t be happier with this. Even works without a tripod! The knobs are easy to turn and everything feels secure and well made. Just a solid, well built film and photo accessory that WORKS!

Very smooth slider

クリーニングとアライメントやり直しをして使用してますカメラをセットするゴムや車輪に切削粉が結構ついていたのでIPAで掃除しました動きが均一でなかったが両角4ヶ所のネジを締め直して改善しましたそれでも一定の速度で動かすのは難しい　やっぱり電動の方が簡単だと思います

Very smooth. Very light. Very good. Can’t beat the value proposition for this one.

I have used a number of sliders in my years as a freelance cameraman - from massive units to smaller ones. This unit by Neewer is perhaps the smallest unit I have ever used, and it is also one of the smoothest ones I have ever used. It short, it is an absolutely excellent piece of gear!If you figure out the centre position to the edge of the sliding block, and double that measurement, you will see that you get a total of just over 12" on a full slide. Some may think that's far too little, but that would be a mistake. One of the great movements of a slide, is the "reveal". If you start on a door jam - the side of a doorway, for example - a slide will reveal a room on the movement. If you are shooting an interview with a second camera, you can have a few foreground objects that the camera view will pass through on its slide. There are many ways to use a slider, and it can really elevate a rather pedestrian shot into something dynamic and exciting!The main rails on this Newer Slider are 1/2" diameter carbon fibre. (You have two, as this is a common two-rail slider...) Both ends are finished with aluminum stops that are fixed in place with Allen screws. That's great because if needed, the ends can be removed. On the underside of each end stop, there is also a 1/4" 20 threaded hole, drilled dead-centre.Mounted next to the end stops, there is a smartly designed base arrangement for using the slider on the ground or table-top. By rotating a bright red knob, short 2" legs can be swung down. The legs work on a ratchet gear system. It makes for positive stops that will not move, once set. You tighten that red knob to lock the leg into place.How great is the detail of a Newer Slider? Each rubber foot at the base of each leg, is mounted onto a threaded rod. This means that you can adjust the length of each leg to an exact position. If the floor is not level, you just make an adjustment and drop one foot down a little bit more. Another red threaded locking washer will keep the foot in place.In the centre of the two rods that make up the slider, Neewer has mounted a fixed block underneath. It runs about 2 5/8"across and about 1 3/4" long. It serves to purposes. First, it helps to keep the rails fixed in place with no flex or movement. Second, it provides addition mounting solutions. There is a single 3/8" threaded hole in the centre, along with four 1/4" threaded holes surrounding the larger one. This allows you to mount the unit on a tripod or any other kind of platform you have in mind.The sliding block is nicely made. There is a built in "bulls-eye" level to aid with getting the whole slider in a level position. A large, round rubber mat surrounds the 1/4" fixed screw that rises from the centre. And at each of the four corners of the centre block, you have two 3/8" and two 1/4" threaded holes for mounting anything extra you want or need. Nice!Most important, how is the movement on a slide? Excellent! It is smooth without any bumps, dips or "slow spots". This can happen with either defects in the rails or the sliding platform. Both are well made. You can adjust the ease of the slide by adjusting the centre lock knob. If you turn it clockwise far enough, you will lock the sliding stage. Back the knob off some, and you adjust just how much drag you want or need.Bottom Line - An excellent small scale slider! Compact for easy location use. Can support up to 2KG of weight. Very smooth slide and with an adjustable brake. Comes with a few extra bits for attaching phones or "action cameras". Even has a nice 1/4" ball head. All parts are beautifully made. Great padded case, too! A relative small investment that can yield big, professional results!

This carbon fiber slider unit from brand NEEWER is a mechanical based slider with no electric parts, it has no turn dial either, it is simply a push or pull to move back and forth option.That said, it is very well made, both durable and light and with plenty of mounting features and some extra accessories like a phone clamp mount and a nice ball tripod head. At 16in (40cm) it is the perfect size for use with mobile phones or action cameras.The idea of a camera slider is to slowly move a visual from left to right and back again, this effect is called panning and it helps give your clips a cinematic effect. Its a very cool thing and worth ordering a slider for this purpose. If you have a small video tool like a phone, this may be basic, but it is high quality and will definitely do the job. 4 stars.