Your cart is empty.
Your cart is empty.Product Description
Ohana
2025-08-27 17:47:39
I needed these since I picked up the follow focus system. I use it for my 200-600mm sony and my 70-200 sigma. There are a lot of rings available and they are expandable. The fit perfect and my motors grip firmly into the teeth. No issues. Once You cut a ring to make 2 out of them the fitting feels a little bit different. I recommend to grab two sets and leave the rings in its original state if you prefer a more firm feel to it. Not like they move but I rather don't take chances. This kit is amazing. Best bang for your buck for a whole lot of lenses I have.
David H Lewis
2025-08-25 15:30:32
I was concerned about whether the gears on these gadgets would match the gears on my DJI RS4 gimbal stabalizer because one reviewer said they didn't and another said they did. I took a chance and am delighted to report that they match perfectly. So far I've put them on four lenses, each of which has a slightly different diameter of the focus ring. Fit is snug, and operation with the DJI focusing motor is flawless. The best part is just that these things exist. The adjustable band that comes with the RS4 is awful because the buckle thingy where the loop closes, then leaves a tail sticking out, just runs into everything and is nearly impossible to use. No-bump smoothness is SO much better. Thank you, Newer!
BUSKER
2025-08-05 09:04:57
My camera is a Panasonic S5iiX and I have it rigged out with all Neewer brand accessories: mattebox, follow focus, baseplate, cage, top handle, side handle, monopod, etc. The lenses I have are the Panasonic Lumix S-series primes (f1.8). Originally I bought some Tilta brand gear rings from B&H, but I was having problems with the gears slipping on them (even when I had a Tilta brand follow focus). When I switched to the Neewer rings, the problem went away. These fit well and they look good. They're a tad more expensive than the Tilta brand, but what's a few bucks compared to nailing focus on all your shots? Neewer has been a great brand for me and I recommend them to anyone with an S5 or other Lumix setup. You can't go wrong with them and they stand behind their products!
Jeremy H.
2025-07-08 14:31:44
Love Neewer products and have lots of them as part of my kit. These rings definitely fit the bill. I wish they were better categorized in the packaging (lots of trial and error), but in the end they do work. Just be prepared to test-fit ALOT of these rings.Best advice I can give, if the fit is too tight, the ring won't work-even if you can get it on the lens. Why? Because now the gear's teeth won't properly engage the focus pull mechanism which will likely result in slipping. Snug is good. Too tight ain't right.Ideally, Neewer needs to pull a SmallRig and do a friction wheel on their focus pull then these rings aren't an issue.
ChuckleHead
2025-06-27 13:28:46
I had been purchasing -SRs' version of these focus rings but they do not make an 85mm nor a 90mm version. I was hesitant to purchase these rings as I expected a specific level of quality. I am happy to say that these Neewer focus rings are as nice as their competition and as a set is more economical.The 90mm ring fits the RF24-70 f2.8 and the 85mm ring fits the RF 15-35 f2.8Overall, I am happy with my purchase...
Dan Felska
2025-05-20 12:47:58
These are exactly what I needed, and the price was right. With this pack I equipped the following:-FE 70-200mm 2.8 G (focus and zoom)-FE 24-70MM 2.8 G (focus and zoom)-FE 90mm 2.8 G Macro (Focus)-FE 20mm 1.8 G (Focus)-FE 85mm 18. G (Focus)Every ring was labeled, in its own ziploc!Perfect!
PK
2025-05-03 17:11:02
Tried to use on my vintage lens with the dji focus pro. Did not work, caused slips and skips. Made me think the focus pro was defective. After using the dji focus gear my vintage takumars worked perfect.
Philip N. Johnson
2025-03-24 15:05:57
Lens focus grip ring was true to the ordered size and was a perfect diameter. The seamless ring had sufficient stretch to be able to install, but not too much so the grip is tight where it’s needed. I do wish they had different widths as 8mm was a little narrow for my 11mm need.
Yigme
2025-02-02 10:38:11
Funcionan perfecto para cualquier sistema Follow Focus, es buen precio por todo el paquete con distintas medidas.
Zonianos
2025-01-20 18:00:48
It works great. I’m using it with my 14–30 Nikon Z lens.
Customer
2025-01-19 18:16:07
It is nice and best for someone who has many different lenses
Richard Munn
2024-12-01 12:17:35
I purchased several of these for some different lenses for my video rig. I have one on my Sigma 16mm E Mount, and my Sony 18-105 E Mount. Using them with a SmallRig mini follow focus, and they work flawlessly. Snug fit on the lens, and they connect with the follow focus gear perfectly. Recommended!
giorgio
2024-11-15 12:54:55
La gomma è troppo morbida e sugli ingranaggi salta a meno di non fare sempre attenzione alla corsa, nel tempo si ammorbidisce pure e gira a vuoto sugli obiettivi. Prese per il prezzo kit, ma se poi non si possono utilizzare restano inutili
Recommended Products