Your cart is empty.
Your cart is empty.Product Description
Fits for Toyota Lexus Scion Camshaft Position Sensor Connector Pigtail 6189-1129
3-wire, 22 Gauge Wire, 11.8 inches / 11.8" long
Camshaft Position Sensor Connector Plug for Lexus, Toyota & Scion
----Change a new connector to make sufficient contact with the sensor.
----High quality connector can go bad over time due to improper crimping of the wires on the terminals during assembly. A bad connector will often throw a P0340 or P0345 code.
Product Detail:
Conductor Material:100% Copper
Manufacturer Part Number:90919-05060
Interchange Part Number:SU7792,CSS1029,S10224
Rob W.
2025-09-02 09:28:25
Bought this to fix cam sensor connector on a 2010 Toyota Camry V6 (2GR-FE engine) that had all the wires pulled out of it when replacing spark plugs. This was for Bank 1 exhaust cam. This connector has the same color wires as the original wiring harness BUT it is not a color for color match for the sensor I was fixing. Also the connector comes with plenty of wire, I did not shorten them since there is barely any wire on the original harness to allow for wiring harness movement when replacing bank 1 coils and/or spark plugs, particularly cylinder 5, just loop the extra and zip tie with high temp zip tie you can get at home depot.This is the pairing I found elsewhere which worked for my application - no codes thrown:Original Red to RedOriginal Black to YellowOriginal Yellow to Black
Alicia
2025-08-15 21:33:53
Perfect fit
Nick Vue
2025-08-06 13:56:28
Mouse got into my engine and chewed up the wires to the cam shaft position sensor. Needed this plug to fix the issue. Originally ordered the OEM version form Toyota. Turns out the part from Toyota does not include any wires. Just the plug shell itself, which was worthless to me. Glad I found this one for 50% cheaper than the OEM. Used YouTube to find instructions on how to remove the surge tank to access the wire.
Tim Saxon
2025-08-01 15:23:37
It fit and worked as it should , the only problem I had was the colors didn’t match my truck . 4 stars
maldar
2025-07-08 10:45:27
When I was replacing my Ignition Coils I thought I had enough clearance to not unplug everything, but I was wrong and ended up pulling the wires out of the plug of one of my sensors. This was a perfect fit, but the wire colors run differently for that sensor, but my mechanic was able to figure out the correct order and change the connection at the splice and everything works just fine.
Rudy Navarro
2025-02-18 21:53:01
The wiring placement on the on this item is different than on my 2911 Toyota Tundra TRD V8. The Amazon pigtail is black-yellow-red and my truck’s sequence is red-black-yellow. Should I ignore the colors on the Amazon item colors and follow the truck color sequence? The attached picture clearly shows the color sequence. The Amazon website indicates that this item fits my truck. And while the slips into the camshaft sensor perfectly, the wiring sequence is incorrect.
Eric shay
2025-01-29 12:19:23
Product worked fine plug was just like factory plug. However pay close attention to the wiring even though the wires were the same colors as the original they were in different positions in the plug so when you splice it into the pig tail you won’t be splicing color to color at least was the case with the one I received.
randy putnam
2024-12-12 10:45:06
I had rearrange pins in connector, but, was no big deal. Satisfied with plug.
David Olivas
2024-11-15 10:53:29
Excelente producto
Recommended Products