Your cart is empty.
Your cart is empty.Product Description
Vero
2025-07-16 11:22:11
We bought this telescoping (11.8 Inch to 19.7 Inch) bracket to hang the projector up above our heads. It is a great space saver. It was easy to install. I did not know Niervo as a brand, but it is a sturdy (loads 5 kilos max, 11 pounds) wall mount holder that is made apparently of aluminium. What we like is that we could use any of the 4 big white walls if we wanted to, just because this arm can turn on itself, it is a 360 rotable head, very cool. Great value for little money.
Customer
2025-07-14 11:25:25
Does the job but you pay for what you get
JessMess
2025-07-01 18:41:23
The mount assembles and mounts easily with four provided screws. Unfortunately, the holes for cable routing through the mast were not large enough for my hdmi cable to pass through. It is now zip tied to the outside of the mast. Otherwise, it is a good mast that is serving its purpose well
P. M. Y.
2025-06-20 18:20:45
Lightweight aluminum but strong and well made design
Gerardo López
2025-06-19 13:09:57
Producto nuevo y en excelente estado y presentación. Destaco el cumplimiento. Estoy muy satisfecho con este proveedor
Eric
2025-06-16 21:36:59
This one pole design was a nice idea, but this product had some major flaws with keeping my projector study and focused on the right place on the wall. First, the provided anchors are garbage, and make sure you have your own. In addition, the design was flawed with the single lever to lock the angle of the projector. My projector only weighed about 4.0lbs and it had trouble hold up. You really had to push the lever hard and still would not lock the projector in place sometimes. Adjusted at least 5 times in a week. And finally just took the ceiling mount down and ordered a mount with a four screw point bracket. Overall, the product was okay and did the job, but with the flaws and issues had to knock off 2 stars.
steve flinn
2025-06-07 17:42:09
...but make sure you have your wiring squared away before you purchase. I had no luck in finding an extension cable long enough to connect the projector all the way down to the transformer brick, which you probably need to be on or near the floor. Ya don't just want to have the brick dangling from the nice ceiling mount.
James Goatee
2025-06-03 12:59:34
It was better than what I expected
VÃctor Manuel Soto
2025-05-23 16:12:24
Me gusto por lo fasil de instalar, es resistente y la calidad-precio es buena
Mike
2025-05-22 21:37:16
Nice,once you have it set,great for the price
Bernard A. Majarais
2025-05-03 13:50:59
Great product, especially for the price. Very easy to use. Considering it's only using a single fastener to connect to a projector, this is quite stable. The screw hole on my projector is near the front so it's not balanced. But the mount is able to hold the projector at the correct angle.
Customer
2025-05-02 17:15:36
Great product for my mini projector. Only issue is the latch sometimes loosens a bit and the projector moves but is super easy to re-adjust
Sami
2025-04-16 10:14:38
Terrible. Very poor quality. From the get go the screw snapped inside the projector and cannot be removed. I resorted to just use tape to fasten it , but the knob used to tighten it into the desired position is very weak and loose so I cannot tilt it properly to get it to project a straigh imaged on the wall. Very frustrated and disappointed with this purchase.
Vero
2025-04-02 13:01:36
We bought this telescoping (11.8 Inch to 19.7 Inch) bracket to hang the projector up above our heads. It is a great space saver. It was easy to install. I did not know Niervo as a brand, but it is a sturdy (loads 5 kilos max, 11 pounds) wall mount holder that is made apparently of aluminium. What we like is that we could use any of the 4 big white walls if we wanted to, just because this arm can turn on itself, it is a 360 rotable head, very cool. Great value for little money.
Customer
2025-03-27 18:00:42
Does the job but you pay for what you get
JessMess
2025-03-26 11:14:07
The mount assembles and mounts easily with four provided screws. Unfortunately, the holes for cable routing through the mast were not large enough for my hdmi cable to pass through. It is now zip tied to the outside of the mast. Otherwise, it is a good mast that is serving its purpose well
P. M. Y.
2025-03-20 15:05:11
Lightweight aluminum but strong and well made design
Gerardo López
2025-02-22 13:53:03
Producto nuevo y en excelente estado y presentación. Destaco el cumplimiento. Estoy muy satisfecho con este proveedor
Eric
2025-01-28 12:42:08
This one pole design was a nice idea, but this product had some major flaws with keeping my projector study and focused on the right place on the wall. First, the provided anchors are garbage, and make sure you have your own. In addition, the design was flawed with the single lever to lock the angle of the projector. My projector only weighed about 4.0lbs and it had trouble hold up. You really had to push the lever hard and still would not lock the projector in place sometimes. Adjusted at least 5 times in a week. And finally just took the ceiling mount down and ordered a mount with a four screw point bracket. Overall, the product was okay and did the job, but with the flaws and issues had to knock off 2 stars.
steve flinn
2025-01-20 13:24:21
...but make sure you have your wiring squared away before you purchase. I had no luck in finding an extension cable long enough to connect the projector all the way down to the transformer brick, which you probably need to be on or near the floor. Ya don't just want to have the brick dangling from the nice ceiling mount.
James Goatee
2025-01-09 16:21:39
It was better than what I expected
VÃctor Manuel Soto
2025-01-08 15:27:14
Me gusto por lo fasil de instalar, es resistente y la calidad-precio es buena
Mike
2025-01-07 19:43:59
Nice,once you have it set,great for the price
Bernard A. Majarais
2024-12-29 11:10:01
Great product, especially for the price. Very easy to use. Considering it's only using a single fastener to connect to a projector, this is quite stable. The screw hole on my projector is near the front so it's not balanced. But the mount is able to hold the projector at the correct angle.
Customer
2024-12-20 12:22:34
Great product for my mini projector. Only issue is the latch sometimes loosens a bit and the projector moves but is super easy to re-adjust
Sami
2024-11-19 21:50:14
Terrible. Very poor quality. From the get go the screw snapped inside the projector and cannot be removed. I resorted to just use tape to fasten it , but the knob used to tighten it into the desired position is very weak and loose so I cannot tilt it properly to get it to project a straigh imaged on the wall. Very frustrated and disappointed with this purchase.
Recommended Products
$23.99
$ 10 .99 $10.99