Your cart is empty.
Your cart is empty.Product Description
360° FULL motion ball
Universal 1/4inch screw size and optional M4/M6 thread
Metal foldable arms
IDontWantYouToKnowMyName
2025-09-05 12:04:46
This mount has huge thick screws that screw into studs really well and stay in place. As long as you can find the stud (ideally using a good stud finder), you should be good to go with this. Needed to buy big drill bits to do this, but it stays in place well. I recommend this projector wall mount. Probably will leave some decent sized holes when removed though. You can spackle and repaint, but best to keep it there forever. Projector itself was very easy to install, you literally just twist it right on.
HUNGQUOC LU
2025-09-03 18:05:34
Exactly what I needed. It's sturdy and very stable and holds a small projector very well. Also it moves and adjusts so that you if you make small mistakes in mounting, it can be compensated. Great product, great price!!
Javoughn Estep
2025-09-02 17:11:15
amazing picture and good enough sound. some darker scenes can be too black to see detail but it has adjustable picture settings
Caleb Hardesty
2025-08-23 14:24:04
As long as you’re looking for a mount for a small projector, this is the mount you want. Lightweight and easy to install. Adequate adjustment and makes using a projector easy.
Brianstech
2025-08-09 18:37:21
It turns out the best location for my living room projector is between 2 windows, not centered, but offset by about a foot.My plan was to design and weld something out of angle iron since I couldn't easily find an alternative. The problem is incorporating some sort of articulating joints into it for adjustability. This isn't an extra simple project, so I was taking some time to consider the options while my projector sat perched on a tripod.Then while searching Amazon for a mount to attach my new basement projector to the ceiling I stumbled on this Suptek foldable wall mount. Wow, I didn't expect to find such a good answer to my needs.In fact this is about as close as it gets to perfection in my case. A couple of lag bolts quickly had it attached to the window frame before I threaded the projector on using its tripod mount underneath. Up and running in no time.I'm giving this mount 5 stars because it saved me a lot of time over making my own, and it probably looks much better than what I would have created.Here are some negatives, although not bad enough for me to deduct any stars:Bumpability. Virtually anything bumping into the projector will move it, causing a need for repositioning if or when this happens. In my case that's not an issue since I'm just shooting the picture on a wall, but anyone who precisely adjusted their picture to fit a screen might want to consider this.Ball swivel. Locking the projector into the proper alignment requires the tightening of a thumbscrew against a ball. With the screw loosened the projector flops around freely, then tightening it makes the joint shift, no matter how carefully it's done. No big problem, it might take a few tries to get it just right.There you go, a decent wall mount for thirty bucks. I'm very happy with this purchase.*This was NOT part of a promotion.*
BiT
2025-07-21 14:56:30
Overall its fairly nice, however the lack of tightnexx in the two main joints causes the arm to constantly move when even slightly bumped or if there's any cable strain.With no tension in the main arm, outside of the mount itself, it's fairly mediocre but effective enough for the most casual of projector uses.
The review dude
2025-06-18 15:58:43
The media could not be loaded.
Vinny
2025-05-26 14:30:22
Very nice wall mount for a projector. I have a Haprun mounted on top and it fits perfectly fine. Quick and easy to set up, if I had one complaint it's that I wish the end ball would secure itself a little tight, but I just leave it up and try not to touch it.
Eugenio750
2025-05-01 15:28:28
I like the quality of the projector’s support. The kit has even screws!
Paul
2025-04-13 18:22:55
We have used this on a small portable projector around 500gms and works very well. Well constructed. Very pleased with it, for the price.
museg
2025-03-26 12:59:46
Used the mount for a projector. This design is so well thought out unlike other ones. It is quite rugged, sturdy and holds in place once set. The ball screw holds perfectly the load and you can safely tighten it without feeling it will break. I tested the projector at different angles and had the mount extended enough and retracted and the whole assembly was stable and did not shift in any direction. My projector is not a heavy one so I didn't test the mount to the rated load but the build is certainly there and I don't expect it will fail what's it rated for as long as you attach it to a wall stud using the provided screws which may be fairly big depending on what you use the mount for. I used smaller wood screws/attached to a wall stud to reduce the wall hole. Worked like a charm.
Stephen Brown
2025-01-21 14:48:30
This does exactly what it’s supposed to do: Mount a projector to the wall and so such a way that it can be pulled out and adjusted. There are two things I don’t like about it though.1. The head on which the projector mounts in is of very low quality. It’s flimsy and hard to secure at the right angle. I will probably replace it though I shouldn’t have to.2. The mount attaches to the wall with only two screws. It really should have three (one at each end and one in the middle), not only for added strength but to make it easier to Level during installation.If I were buying another one, I would look further to see if there was something designed better, but I can certainly live with this for now.
G.S.
2025-01-08 21:41:48
U can see works well but don't forget to tie bolts just in case because I saw some companies about the projector not stable because of loses bolts. I do recommend
Recommended Products