Your cart is empty.
Your cart is empty.Product Description
Nilight 12V Red LED Round Waterproof Rocker Switch
12V LED Round Waterproof Rocker Switch
Specification
Polarity: SPST; Type: 3 PINS with Red LED; Switch Operation: ON/OFF
Switch Rating: 12VDC
Hole Diameter:20mm/0.8’’
Material: Plastic, Metal
Package includes: 5 Pcs Toggle Swithes with Jumper Wires
Features
ON-OFF LED Round Switch
SPST 3 Prong ON-OFF lighted round rocker switch with 20A 12VDC Rating. LED Indicatior will light up when is turned ON.
IP65 Waterproof Rating
This waterproof switch can be used in a wet environment, no worry about rain or water anymore, which can be used outdoor and rainy day.
Snap-in Design
Snap in Design make the switch easy to install. Extruding the plastic part, then Push in to the Panel.
Silver-plated Terminals
Thickened silver-plated terminals make the switch operate stably under 20A 12VDC.
Easy Installation
Step 1
Drill a 20mm diameter hole.
Step 2
Use the wire connect between the device and switch.
Step 3
Insert the switch into the hole.
Step 4
Installed successfully.
Wide Application
James
2025-08-27 13:36:37
I recently purchased this product, and I must say it works great—better than I had expected! The performance has exceeded my initial expectations in every way. For such a great price, I am genuinely surprised at the excellent craftsmanship of the product.From the moment I unboxed it, the quality was evident. The materials used feel durable and well-made, which is often hard to find in products at this price point. Each component fits together seamlessly, showcasing attention to detail that is typically reserved for higher-end items.Overall, if you’re considering this purchase, I highly recommend it. You won’t be disappointed by the quality and performance you receive for such a reasonable price!
Ben
2025-08-24 17:18:06
Works for what I need
D Mill
2025-08-05 10:33:56
Feb 16, 25The product I ordered came with connecter leads, a RED, YELLOW, & BLACK for each switch (qty 5).Even though the switch is rated for 20ADC, the wire leads are 16 awg, so that means the max current is limited to 10ADC.I had two choices, make new connector leads or change the main battery fuse to 10 amps. The battery is used to power my fish finders (2) and interior boat lights. If the fuse blows, then I'll make new leads.After mounting a switch in a battery box, I needed to route the wires. To my surprise the wires came off the connectors on the switch. Apparently the crimp is weak. I ended up soldering the wires to the connectors. I recommend testing the wire on the connector before use, give it a solid pull while holding the connector with pliers. (Maybe I should have simply created new 14 awg leads)The design of the switch is NOT waterproof, there's a rubber boot covering the rocker switch, but it does not seal tight when pressed into the opening created. The rubber boot will help prevent water pentation from water spray and rain while boating.Per pervious reviewer's comment, I used a 13/16 bit to create the hole and the fit was good.I did modify the plastic retainers to aid in the insertion and create better retention.Even though these switches came in a sealed package, the clear finish on the switches had numerous scratches. If the package wasn't sealed, I would have thought these were used switches.The green LED is not bright, but it doesn't need to be for me, its just an indicator the power is on.So, due to the extra work of fixing the connectors, retention tabs and the poor finish of the switches, 4 stars.
Reviewer
2025-07-28 12:40:48
Installed these switches in numerous locations in my ambulance to RV conversion.... they look sharp and have a nice tactile feel to them. They install neatly and securely in a 13/16" hole..... Very pleased with the finished product.
Kimberly Villani
2025-07-18 20:51:05
Perfect for my situation. I have 6 of these mounted in my ram 2500 (train horn, light bar, light pods) and they work flawlessly. Haven’t had a bad one yet. Follow the wiring diagram in description and you won’t have a problem
Silvestre Rebolledo
2025-04-25 16:11:35
Product its easy to install, love the way it lights up letting you know the power its running,. Such a great deal i got extras now for my next project because you never know when you might need another one. Product as described. A++ product and seller.
JBC
2025-04-20 12:27:07
Little blue light comes on when switch is on. Nice touch. These were at such a low price point I worried about the quality but they have been installed and used for some time now and no problems at all. I used them in the lower part of my BMW control stack to control two 12 volt power outlets I installed.
Daniel N
2025-02-26 13:44:03
These worked well for an automotive project i was working on . The blue light is bright enough for me. Drilled a hole with a step bit and made it snug fit for the switch , switch doesnt rotate when pressing it in or off or through bumps the vehicle may have it keeps the same orientation because if the plastic spring tabs on the side.
Abum
2025-02-09 17:17:30
Excellent heavy duty ðŸ‘ðŸ»
Frank Arella
2025-02-08 10:06:58
Perfect as described
Jeremy
2025-01-28 16:19:37
The media could not be loaded.
Rodolfo A Valencia P
2025-01-02 15:33:55
De buena calidad con relación a su precio y muy sencillos de instalar
Ken Shear
2024-12-15 14:19:33
Works as advertised
Recommended Products