Your cart is empty.
Your cart is empty.The OKNIFE D1 EDC Multi-Bit Driver, your go-to EDC multi-bit driver designed for everyday tasks. This lightweight tool fits comfortably in your pocket, making it perfect for quick fixes around the house. It features a hidden compartment that conveniently stores 4 double-ended hex bits in 8 different sizes, ensuring you're always prepared. With 2 built-in magnetic bit holders, you can achieve the right torque while keeping bits securely in place. Plus, the rear lanyard hole with an included lanyard allows for easy carrying.
MikeM33
2025-08-16 17:41:00
This is my go-to mini pocket tool, and it’s not even close. The size is perfect to slip in a 5th pocket, and forget about it. I personally think the size is perfect. It is small, but for adjusting pivot screws or tightening pocket clips on the fly, it serves its purpose. I have no intention of putting this through hard-use paces, so set your expectations and enjoy it for what it is. You get 8 different bits (4 double-sided) and I’ve found each of them to be useful at some point. Quality fit and finish and definitely worth the $20+Just get it already
Geekout2
2025-07-23 18:09:56
Saw this on an EDC Youtuber's channel and decided to give it a try.It is extremely well made and fairly priced for the quality. The included bits and pencil are great. Being able to store the needed bits in such a small form factor is even better.Additionally, you can use other bits that you likely already have.Very versatile, compact, and extremely well made piece of EDC gear. Definitely recommend!
Ericman967
2025-07-17 14:56:39
Great for keeping around your desk! It's small, the titanium is cool and I like how the bits fit inside. The bits are magnetically attracted to the tip, so there is a nice, little "snap" when they fit in the tip. However, the bits are very small...easy to fall through your fingers when you pop them out of the base. I don't use the hole on the end for extra torque...never need to use it. This is much smaller than a Hoto although with fewer bits. However, Olight includes the most useful bits..torx bits, flat head, philips. This one is good!
That One Guy
2025-05-29 13:08:43
Make sure you look at the dimensions, this may be smaller than you think! Great little tool. Perfect to slip into an EDC kit or your pocket. Not perfect, but that's why it's not 5 stars.Well built. It holds 4 of the 5 nibs inside, which is part of the problem of why it's not perfect. Since there's 5 nibs and spot for 4 in storage, that means 1 will always be installed, I don't like that because it really means 1 is going to be lost since it can't be stored. I'm guessing that like me, you're going to choose the pencil lead as the one that's not stored. If this is going to be loose in a pocket, be prepared for whichever nib you choose to keep installed to become loose and fall out.The storage compartment is great for the other 4. The door is solid and it fits the other 4 perfectly. Keep the actual 4 screw nibs inside as the pencil lead isn't all that great and it's not going to be something you depend on, so not a big deal if/when it gets lost or broke.The other head scratcher on this is the included "lanyard". It's not actually a lanyard, it's a few inches of paracord. It's not tied or anything, just a few inches of line that you are expected to do something with. Great if you're one of those guys who weave paracord, very lame if you're not. I'm not a guy who can macrame paracord, so I put an actual lanyard on it.If it weren't for those details, this would be 5 stars. It's a great little tool that's well built if not well thought out and it will fit in any EDC kit or pocket. It's lightweight and easy to use.
R. Giles
2025-04-25 12:17:01
First of all, this is high quality and tiny enough to be comfortable in a pant pocket. This helped me solve a problem I had below.Problem: I have keyless entry, and the Ford FOB comes with a flip out key to open the door in case the battery on the vehicle dies. I purchased a FOB cover and if I need access to the flip out key there is a tiny screw I would need to remove which would be a predicament. I added this to my keychain to solve that problem.Here is the FOB cover I purchased that has a screw that needed removed: https://www.amazon.com/dp/B0BFWW4DZ5
Bobi
2025-04-24 13:27:58
This thing is great. Smaller than my pocket knife (icon drop point), the bit sizes are perfect. Covers all the screws on my knife, covers all the screws on my red dot, also the screws on my glasses. Best EDC screw driver for sure. Fits in the 5th pocket with the pocket knife.
"Mitch"
2025-04-13 13:34:15
Multiple Use, Very Well Made, Great Value, Great Grip, Looks Good, and Very Lite Weight. The Bits store inside without worrying about them falling out. It's Magnetic too.
Pat D.
2025-03-28 10:46:02
This will last forever. Highly recommended.
Gabriele Conti
2025-01-28 14:31:29
Il cacciavite si presenta molto bene sia a livello di packaging che di finiture. Materiali di qualità , la testina resta ben salta al corpo una volta inserita e risulta estremamente maneggevole.Le punte in dotazione coprono praticamente ogni evenienza. Le dimensioni ridotte (sta nel palmo di una mano) lo rendono un ottimo portachiavi e facile da portare sempre con sé!Un articolo che non ti stancherai mai di avere appresso.
Bernard
2025-01-04 14:39:05
Il ne quitte pas ma poche et très utile pour des travaux divers ( vêtements ; montre , serrures etc...)
MK
2024-12-30 15:30:30
Schnelle, unkomplizierte Lieferung. Preis und Qualität passen auch. Ein weiteres, must have als EDC. Einziges kleines Manko, es könnte ein kleiner Schlitzschraubedreher z.B. für Brillengestelle dabei sein. Ansonsten sehr gut
Orlando R.
2024-11-27 12:56:34
ottimo, leggero, compatto, robusto e compatibile con i mini bit da 1/8"
Xavier B.
2024-11-12 19:56:04
A 3 jours d'intervalle j'ai acheté le D2 et le D1. Je pensais lui préférer le D2, mais non je crois que le D1 me plaît plus. J'aime bien la possibilité de passer une dragonne. L'outil me semble être un must have
Recommended Products
