Your cart is empty.
Your cart is empty.Product Description
Ross B.
2025-08-19 16:19:44
Works very well.....lights up our sidewalk and the front yard....and it's bright....this is a non remote unit.....would buy it again......
icybernate
2025-08-15 20:24:08
Super bright, lights up the entire backyard, installed in under an hour.
RJF3
2025-08-13 14:14:23
Super bright. I just hope it outlasts the previous one I had (same manufacturer, I think) that only lasted about 3 years. The sensor on the old one died and for the last year continued to go on and off whenever the wind blew with any force (overly sensitive). Price is right.
just someone
2025-08-08 12:12:23
Works as it should and i like the feature that ut is dimmer when nothing is in the motion range but gets brighter when motion is detected. Didn't even know that was a feature til it was installed
Robert S.
2025-08-07 15:19:29
The lights are great, they work like they are supposed to. Now, setting the dials after initial testing.So, you have wired and tested the new lights. Set the left hand dial at about five o'clock. Set the middle dial at eleven o'clock. Set the right hand dial between "L" and "M". Be sure to point the sensor in slightly downward angle. My lights are only about 8 feet off the ground, so the sensor doesn't have to be angled very much. If your light is higher off the ground, the angle of the sensor will have to be steeper.This initial setting will insure that your lights turn on and off with movement after dark. If you set the middle dial to another setting, the light will be on all the time, but will go to high intensity when movements are detected, and then cut back to a reduced light output after movement ceases. The reduced light intensity setting can be adjusted by moving the middle dial to an increased or decreased setting. The right hand dial is the distance set to activate the lights coming on with movement. Turning it counter-clockwise from L to M to H will increase the distance.My lights stay on for about three minutes after activation. By moving the left hand dial from the initial five o'clock setting further counter-clockwise, you can increase the light-on time to a maximum of ten minutes.
David Bowman
2025-07-14 09:14:54
Quality materials and light distribution. The motion sensor has a very good range for detecting motion.
D. Zimmer
2025-07-10 16:09:22
Tech support told me cannot adjust to send it back to Amazon, I have installed 5 of them
Mutti Frederick
2025-06-12 16:06:20
I bought 4 of them. Had them professionally installed. Only 2 works.
alexandre
2025-05-12 13:08:47
I ordered THESE lights because they were sold as a pack of 2 but I only received one of the two lights.
Ross B.
2025-03-15 18:10:07
Works very well.....lights up our sidewalk and the front yard....and it's bright....this is a non remote unit.....would buy it again......
icybernate
2025-03-06 11:28:55
Super bright, lights up the entire backyard, installed in under an hour.
RJF3
2025-03-03 18:25:23
Super bright. I just hope it outlasts the previous one I had (same manufacturer, I think) that only lasted about 3 years. The sensor on the old one died and for the last year continued to go on and off whenever the wind blew with any force (overly sensitive). Price is right.
just someone
2025-02-14 15:35:31
Works as it should and i like the feature that ut is dimmer when nothing is in the motion range but gets brighter when motion is detected. Didn't even know that was a feature til it was installed
Robert S.
2025-02-05 15:03:22
The lights are great, they work like they are supposed to. Now, setting the dials after initial testing.So, you have wired and tested the new lights. Set the left hand dial at about five o'clock. Set the middle dial at eleven o'clock. Set the right hand dial between "L" and "M". Be sure to point the sensor in slightly downward angle. My lights are only about 8 feet off the ground, so the sensor doesn't have to be angled very much. If your light is higher off the ground, the angle of the sensor will have to be steeper.This initial setting will insure that your lights turn on and off with movement after dark. If you set the middle dial to another setting, the light will be on all the time, but will go to high intensity when movements are detected, and then cut back to a reduced light output after movement ceases. The reduced light intensity setting can be adjusted by moving the middle dial to an increased or decreased setting. The right hand dial is the distance set to activate the lights coming on with movement. Turning it counter-clockwise from L to M to H will increase the distance.My lights stay on for about three minutes after activation. By moving the left hand dial from the initial five o'clock setting further counter-clockwise, you can increase the light-on time to a maximum of ten minutes.
David Bowman
2025-01-14 18:15:38
Quality materials and light distribution. The motion sensor has a very good range for detecting motion.
D. Zimmer
2025-01-03 15:24:45
Tech support told me cannot adjust to send it back to Amazon, I have installed 5 of them
Mutti Frederick
2024-12-31 15:04:50
I bought 4 of them. Had them professionally installed. Only 2 works.
alexandre
2024-12-29 15:49:34
I ordered THESE lights because they were sold as a pack of 2 but I only received one of the two lights.
Recommended Products