Your cart is empty.
Your cart is empty.Product Description
The On Stage TMO8B threaded table microphone mount clips to flat surfaces and features a 5/8 inch-27 thread to fit most microphone clips! Features a 3mm rubber shock pad to help reduce any unwanted vibrations to give you clear, crisp sound. Get On Stage and get your voice heard!
From the Manufacturer
Sturdy flange mount for mounting mic clips to flat surfaces. Standard 5/8"-27 threading accept standard mic clips, goosenecks, and other mic accessories. This model is available with a black (TM08B) or chrome (TM08C) finish.
Karen and Dean
2025-08-27 13:16:10
The On-Stage TM08B Microphone Flange Mount is a fantastic option for anyone looking to securely mount their microphone on a flat surface. I've been using mine for a while now, and I'm very impressed with its functionality and design.Here's what I particularly like about the TM08B:Compact and Space-Saving: This flange mount eliminates the need for a bulky mic stand, freeing up valuable floor space in my studio or workspace.Sturdy Construction: Despite its small size, the TM08B feels very solid and secure. I haven't had any issues with it wobbling or bending, even when holding a heavier microphone.Reduces Vibration: The built-in rubber shock pad does a great job of dampening unwanted vibrations that can be picked up by the microphone. This helps to ensure a cleaner, crisper sound quality.Versatile Use: The standard 5/8"-27 thread means the TM08B is compatible with a wide variety of mic clips, goosenecks, and other microphone accessories.Easy to Install: Mounting the flange mount is a breeze. It comes with the screws needed to securely attach it to a wall or flat surface.Overall, the On-Stage TM08B Microphone Flange Mount is a great little product that delivers a lot of value for its price. If you're looking for a way to save space and improve your microphone setup, I highly recommend checking it out.
Hopes for Humanity
2025-08-16 10:35:35
I needed a desk mic set up and had a Olympus Mic that I have purchased years ago. Was thinking of purchasing a good quality USB mic but since I had a headphone/mic amplifier, I thought I make my own. I then decided to give this gooseneck a go and I'm glad I did. I purchased a wooden base from Michael's for 99cents and mounted the gooseneck to the base. Then ran the 3.5mm male to female cable through the gooseneck (though you have to cut the wire then resolder on the 3.5mm male jack). Then attached the gooseneck base to the wooden base. It sounds friggin awesome. Gooseneck and base feels very premium and just like pro equipment. I'm a happy camper at a fraction of a price of professional equipment!
BluJay1954
2025-08-09 17:10:21
Used to mount ceiling room mikes in a studio. Worked great.
Al
2025-05-06 12:27:37
I ordered this item to be the base for a mic stand to use with my laptop DJ setup. Rather than mount it on a stationary object like a desk or table, I got a 1/4" sheet of fiberboard, some shiny aluminum contact paper and cut out a custom base. I covered it with the contact paper then drilled holes and used some 10/32 flush bolts with lock washers and nuts to keep the base securely attached to the fiberboard. It looks great and functions really well. Anywhere I take my board, I can just slide the fiberboard base under it and have a gooseneck mic stand which takes up virtually no desktop space.
Black Belt
2025-05-04 15:21:24
I have two of these drilled into my desk, one for my mic and the other for my camera. I love being able to secure my equipment to the perfect spot instead of having something clamped far-off on the edge of my desk. The mount is made from thick steel and has a thick pad on the bottom where it touches your desk surface. Make sure you get the right adapter (usually 5/8 to 3/8 or 5/8 to 1/4), including making sure you get male/female connections, if whatever you are screwing this into does not accept 5/8 male which is what's on the mount.
NormB
2025-04-19 11:11:49
It worked for my basement desktop. Screwed it down and it's not tipping.
Asher
2025-04-09 14:40:34
Works really well with normal mic stands, real metal.Doesn't work with the InnoGear Boom Arm, so I assume it won't work with most boom arms.Overrall 9.5/10
B
2025-04-06 15:07:22
ok for a desk mount.
Fernando Jahel Chimal Moreno
2025-04-01 18:08:25
La pieza es bastante pequeña por lo que es necesario sujetarla a un contrapeso. Está elaborada en un muy buen material pero para un micrófono de condensador común requiere una base para que no se caiga, está base puede ser con un trozo de madera o metal y queda perfecto, además la base trae un juego de pijas para la instalación.
Marcos Olveira
2025-03-17 14:43:13
Produto com ótimo acabamento.
Ear Wax 101
2025-02-10 14:46:24
True fit
Dada sy VAH
2025-02-06 14:17:42
Impeccable, il reste à voir à long terme. Actuellement le support correspondent bien à la description donnée. Le reste sera avec le temps.
Ghislain Joseph
2025-02-03 19:37:30
bien pratique pour moi
Recommended Products
$14.95
$ 6 .99 $6.99
$29.00
$ 14 .99 $14.99