Your cart is empty.
Your cart is empty.Product Description
Installation Steps
1.Place metal hook over shaft.
2.Place rubber gasket over shaft.
3.Insert shaft through hole in clock surface.
4.Place dial plate brass washer over shaft.
5.Attach dail fixing brass hex nut.
6.Gently press hour hand onto shaft at 12:00 position.
7.Gently press minute hand onto shaft at 12:00 position.
8.Press on second hand at 12:00 position.
9.Press on second brass cap.
（If you choose to use the 8-second hand, you do not need to use
the 9-second brass cap and vice versa）
10.Hang up the pendulum.
How to get the right replacement
.Measure the thread and shaft of your old clock mechanism, if the length is shorter or equal to ours, then this clock movement mechanism is suitable for your clock.
We have 4 different shaft length movements
.If you want to replace your old movement, carefully measure the movement shaft length.
.If you still can't confirm which one is right for you.Please refer to our picture,take a photo of shaft part and hands size,We will help you confirm.
Pendulum Size
.Pendulum Total length: 220mm ( 8.66 inches )
.Pendulum Diameter：60mm ( 2.36 inches )
Come With 3 Diffrent Size Hands.
Hands 1
Not suitable for clock face diameter less than 225mm / 8.5 inches.
Hands 2
Not suitable for clock face diameter less than 205 mm / 8.07 inches.
Hands 3
Not suitable for clock face diameter less than 142 mm / 5.6 inches.
Ed Spenske
2025-08-12 15:53:28
Clock looks and works perfectly, also very easy to install.
NedAB
2025-07-22 13:28:25
Original item proved defective. Contacted Amazon and received a working replacement within 2 days. This shows good communication between the seller and Amazon. Thanks to everyone involved. The clock is working fine.
Penelope H
2025-06-06 15:32:00
Keeps good time. Good value.
Lorith
2025-05-14 17:30:53
I was devastated when a clock I had received from a dear friend's estate broke. This kit, with 3 styles of clock hands to choose from and a "tail wagging mechanism" brought it back to life! I don't have clock fixing experience, but this was easy to install. I smile and think of my friend when I see it keeping time with a happy wag of its tail!
Lamar W. Reynolds Jr.
2025-05-11 18:30:03
Worked perfectly in my old pendulum clock. Easy to install.
Chief
2025-04-04 18:09:49
great mechsanism. accurate time. pendulum swing nicely
Cynthia Hitchcock
2025-01-28 12:23:30
All the parts were there just as advertised. I would caution you that when you are putting the hands on be careful. They are hard to push on, which I understand as you don't want them slipping, but it is very easy to bend the hands, and hard to see if they will collide. So I would suggest turning the clock for a couple of revolutions to make sure the hands have enough separation from each other before putting the clock back together. Other than that it works great and is a good value for the money.
Patricia Thornton
2025-01-04 17:28:33
Would not keep time. Second hand keeps stopping. I have tried everything. Brand new Duracell battery. It is worthless!! Now of course, it has been 30 days and I can't return it!!!
Recommended Products