Your cart is empty.
Your cart is empty.Product Description
INSTALLATION GUIDE:
- 1. Match the intended thread repair kit.
- 2. Check the size on the tap.
- 3. Drill out the damaged bore or thread for the thread you are intended to restore(Drill tool NOT included)
- 4. Clean the hole with cleaning cloth or aerosol, make sure no swarf is left in the hole.
- 5. Slightly run the tap into the hole, from the bottom tapered cutting edge, to the correct depth by hand or on a machine tool of 1/4" square drive.
- 6. Clean the thread, ensuring no swarf is left in the hole.
- 7. Check the size of inserts, then screw in the threaded repair insert using the insertion tool.
- 8. Clean the thread and remove dust and debris.
- 9. You are ready to have a repaired thread.
PRODUCT SIZE
- Total Length: 7.6cm / 2.99"
- Tap Thread Width: 9mm / 0.35"
- Tap Thread Diameter: 12mm / 0.47"
- Tap Pitch: 1.0
- Tap Thread Length: 2.5cm / 0.98"
- Screw Thread Pitch: 1.0
- Screw Thread Outer Diameter: M12
- Screw Thread Length: 17mm / 0.67"
- Inner Thread Inserts: M10x1.25
- OuterThread Inserts: M12x1.25
PRODUCT INFORMATION
- 1/4" Square Drive
- Straight Flute
- M12x1.0
PRODUCT INFORMATION
- M10(Thread Diameter)x1.0(Pitch), HSS
PACKAGE LIST:
- 1 Pcs M12x1.0 tap
- 10 Pcs M10x1.0 inner trhread inserts
- 1 Pc plastic case
Esteban V.
2025-07-24 16:43:48
Good
ATTILIO L.
2024-12-25 14:44:24
Buena acabo y presentación
Recommended Products