Your cart is empty.
Your cart is empty.Product Description
Features
Universal 6 point, 7/8 in. (22mm) socket suitable for most oxygen sensors.
Precision casting for strength and accurate fit. 60-mm long by 48mm High.
Compatible with 1/2 inch" Drive ratchet or breaker bar.
Slotted design allows removing oxygen sensor with wiring harness attached.
Compatible for Ford, for Toyota, for Nissan, for Mercedes, for BMW,
and many European makes and models.
High Performance
High-Quality heat-treated chromium-molybdenum steel (CR-MO) steel for strength and longevity.
With a Manganese Phosphate coating to resist-corrosion.
A CLOSER LOOK
This socket is also offset, so you can get the extra leverage you need, even in hard to reach spots
60-mm Long by 48mm High, compatible with 1/2 inch drive ratchet or breaker bar
Package Includes: 1pc 1/2-Inch Square Drive by 7/8-Inch(22mm) Oxygen Sensor Socket
Dee Steve
2025-08-14 13:11:53
I fought with an o2 sensor for 2 days couldn’t get it off ordered this came next day. O2 sensor was off in 1 minute didn’t know this would make a big difference I’m impressed
ericktoma
2025-08-05 19:21:51
Won’t open has they said. This one worked where the long socket design failed. Not a fan of the star 1/2 inch drive design because will fall off the brake bar or the ratchet
Michael Frank
2025-06-29 14:07:59
Excellent workmanship with multiple points to engage socket to remove oxygen sensor.
Music Aficionado
2025-06-22 14:03:03
Seems heavy duty. Was a little loose of a fit, but worked perfectly for removing O2 sensor. Can't beat the price.
Hutch
2025-06-05 10:36:47
What a blessing. Put my breaker bar on and came right loose.Would highly recommend.
Tonette Topps
2025-04-29 12:33:15
Good tool but doesnt come with the other long wrench extension
Kyle
2025-03-25 09:17:56
If you have a rusted o2 like most dont buy this. The socket will expand and round off the sensor
Stephen
2025-01-24 17:08:45
Note;- a 1/2" drive adapter required to apply torque to tool.
David F.
2025-01-02 17:47:15
I had to replace an oxygen sensor on a 1993 Honda Prelude. The old sensor was pretty much welded in there! The oxygen sensor sockets I bought from Amazon did their job and with a lot of penetrant and several hours the old sensor came out. The thread chaser made sure the threads were clear of corrosion and the sensor went in with no trouble at all! Very much recommend!
Recommended Products
$29.99
$ 13 .99 $13.99