Your cart is empty.
Your cart is empty.Compatible with Roomba Braava jet m6 m Series Robot Mop
Bonnie Knoppe
2025-08-21 09:36:17
Looks exactly like the original wheels. Easy install. Braava Jet works great again.
Captain Jack
2025-08-12 16:55:45
After using the Braava Jet M6 for a while, I found that it was having trouble getting traction, especially when trying to get out of the charging station. It was possible to get some traction back by sanding the surface of the wheels, but eventually I decided to replace the wheels. A wheel is held in place by a single Phillips head screw and there is "gasket" between the wheel and the hub. A pair of tweezers or forceps is handy for dealing with the screw and aligning it when replacing the screw. The whole process of changing the wheels only takes a couple of minutes. These new wheels have cured the problem I was having with docking and undocking and loss of traction caused by slippery wheels.
Craig Devin
2025-08-10 10:36:34
Perfectly fit M6 Braava Jet, two easy screws in and out, no removing outer cover of unit! Would buy again, instant traction!
R. C. L.
2025-08-08 11:46:48
Returned the item.
Dave J
2025-06-09 17:36:54
I tried a couple of competing options but these were the ones that worked best - just like new. After years of use the old wheels simply were chewed up and couldn’t reliably surmount the thresholds in my house any longer. Brand new tires from the competition had the same problems as the old wheels. Came with fresh screws too!
Darrell Johnson
2025-05-22 13:37:34
These are the replacement wheels you will need to keep the robot reliably docking/undocking. They are indistinguishable from the ones it comes with.
Joe
2025-04-30 12:00:57
The pictures shows screws included. If you’re expecting/needing screws you’ll be disappointed
Customer
2025-03-13 14:20:48
Ok
scott
2025-02-26 13:36:41
Bought a set before this ended up being wrong ones that made the mop sit and spin. Found these one bought and put on work great no issues
Prathit
2025-01-21 14:47:58
Worth of $ paidMuch better than cheap tire grip items
J Robert
2024-12-29 13:34:41
This works but a bit pricy.
Slnick
2024-12-22 18:04:35
I have tried a couple of replacement treads that just fit over the existing wheels and all they do is spin when they get wet on my Braava M6. These replacement wheels are a little more expensive but they actually work and don’t just sit there and spin. I recommend these.
Recommended Products
