Shopping Cart

Your cart is empty.

Your cart is empty.

PCIE to SATA Adapter,PCIE to SATA 3.0 Expansion Card,4-Port PCIE to SATA 3.0 Expansion Controller Card Adapter 6G,SATA Controller Expansion Card with SATA3.0 Interface

4.8 (11) Write Review
Free shipping on orders over $29.99

$19.38

$ 8 .99 $8.99

In Stock

About this item

  • Rear SATA3.0 interface: The new upgrade expands the four rear SATA3.0 interfaces, which is more suitable for narrow spaces. 2U can also be better fixed; from the rear wiring, there will be no crossover with the graphics card
  • 4U, 2U universal: This product is equipped with 4U, 2U double fixed brackets, which are supported by large or small chassis
  • Larger heat sink: better heat dissipation and more suitable for long hours of work
  • PCI-E interface: It is easy to install in the PCI-EXPRESS slot of the chassis with a thick gold-plated PCI-E interface. Better and easy data can effectively reduce the data loss rate
  • The tail is designed to be flush: the chance of blocking the graphics card fan is smaller


Features:
1. Rear SATA3.0 interface: The new upgrade expands the four rear SATA3.0 interfaces, which is more suitable for narrow spaces. 2U can also be better fixed; from the rear wiring, there will be no crossover with the graphics card.
2. 4U, 2U universal: This product is equipped with 4U, 2U double fixed brackets, which are supported by large or small chassis.
3. Larger heat sink: better heat dissipation and more suitable for long hours of work.
4. PCI-E interface: It is easy to install in the PCI-EXPRESS slot of the chassis with a thick gold-plated PCI-E interface. Better and easy data can effectively reduce the data loss rate.
5. The tail is designed to be flush: the chance of blocking the graphics card fan is smaller.
6. Four-layer circuit board with isolation layer in the middle for stronger anti-interference ability.
7. Original mode selection: AHCI, IDE, data disk, three modes are to choose.
Specification:
Model: SA3004
Bus interface: PCI-E X1 (compatible with X4, X8, X16/graphic interface)
Number of interfaces: SATA3.0 interface * 4
System support: for XP/2003/Vista/Win7/Win8/Win10 (32/64 bit) operating system
Size: approx. 120 * 65 * 56mm / 4.7 * 2.6 * 2.2in (As pictures show)
Weight: approx. 89g
Package list:
1 * Expansion Card
1 * 2U Baffle
2 * Screw


thomas k
2025-08-07 17:08:13
Driver disk was included
Zachary McMurrin
2025-06-29 17:35:28
tried different motherboards, different operating systems, Different hard drives. tried all 3 settings on the card, could never get it to work correctly. Waste of time and money.
Squirrelz
2025-05-27 10:25:42
Does not work in Dell servers. Driver is difficult to find, and device never initializes inside of Windows.
AzBiker
2025-05-11 15:27:54
If you want to waster both your time and your money then this is the CRAP to buy
David Hwu
2025-04-30 14:31:21
Crashed with blue screen with my Asus ROG MB and Wib 11
Frank zulinski
2025-04-19 21:59:17
Works perfect
MP
2025-04-13 11:43:53
Das Teil wurde an einem bereits laufenden NAS-System mit TrueNAS als Hardeware-Erweiterung montiert und funktioniert hardware- und software-mäßig direkt und einwandfrei. Zwei drei Jahre alte NAS-Festplatten vom Typ Seagate je 2TB wurde direkt erkannt und in TrueNAS als Pool bereitgestellt.
Mr. Wayland J. G. Sothcott
2025-01-29 11:45:34
I'm not joking, I'm running both using this. I built a small form factor machine with a Proxmox base hosting a TrueNAS VM with this card passed through with SSDs plugged into it.The machine acts as both server and Windows desktop. As of writing it's been running for 60 days up time without a reboot.The next one of these I build will be running two virtual Windows desktops and a file server. How much can I pack into a SFF case?
peter rodgers
2024-12-26 11:02:26
Good:No frills multiport SATA controller. Been running 2 of these cards error free 24/7 for 3 weeks. They're fully populated with a total of 8 x SSDs in a rough TrueNAS Scale build while I mess around learning the features.Bad:Little to no documentation. There is a dip switch for 3 card modes (visible to BIOS for bootable drives etc). Tech savvy people will probably need no explanation of this feature. If you don't know what it does a quick Internet Search will bring up plenty of hits. It's a generic card with multiple rebrands so as long as the chipset is the same the functions will be too.To start you off this is what Copilot (AI) had to say:The SU-SA3004 SATA controller card has three modes that can be selected using the dip switch feature. Each mode serves a different purpose:AHCI Mode: This mode enables advanced features like hot-swapping and native command queuing, which can improve performance and compatibility with modern operating systems2.IDE Mode: This mode emulates the older IDE interface, which can be useful for compatibility with older operating systems or devices that do not support AHCI.Data Disk Mode: In this mode, the hard disk does not participate in the boot process, and the self-test interface can be turned off. This is useful for storage devices that are not used for booting the system1.
Emslander Florian
2024-12-12 19:36:04
Habe ein Intel Serverboard und es wurde ohne Probleme erkannt, ohne Treiber. Kann sogar von der Karte booten. Top Preisleistungsverhältnis.(TrueNAS 13.02)
Frank
2024-11-29 14:07:37
Hallo,ich habe diese Karte gekauft um mein Nas damit zu füttern.Sie war sehr günstig und sehr schnelle Lieferung durch Amazon.Die Karte ist etwas anders als auf dem Bild.Es gibt einen Schiebeschalter für AHCI Boot, IDE Boot, und kein Boot.Karte eingebaut, Systemfestplatte angeschlossen und gestartet.Funktioniert out of the Box.Treiber für den 1061 und Firmware 4.27 (nicht die Raid variante) suchen und installieren.Spass haben.