Your cart is empty.
Your cart is empty.Product Description
Customer
2025-08-15 17:47:41
I have these mounted on a work helmet and with Howard Leight’s for hearing protection. They work and we’re easy to install like others I’ve used before.They do feel flimsy or cheap, but so far they’ve held up to being used and haven’t broken….yet.
mike
2025-08-09 11:42:28
A part so simple. How can they possibly screw these up? Let's dive into how. They DO NOT fit arc rails correctly! 1 side was snug how it should be the other was loose and sloppy. Almost enough slop you could remove it without sliding it. They DO NOT hold the ear pro tight to your ears (even on the side that fit the rail correctly.).Quiet simply I wouldn't purchase these again and would return them if I had all the packaging still.Spend the $75 and get the real thing! The 3m peltor arc rail mounts do exactly what they are supposed to and fit exactly how they should.
Ryan Andris
2025-07-07 10:07:55
3 stars only because one clip came broken, which, while not the end of the world because I had spares from the headset I bought with this, it’s still inconvenient if I wanna switch between helmet setup and straight headset. DISCLAIMER: The damage was to the actual clip ‘handles’ not the whole piece itself, one handle had just snapped off rendering the entire piece useless, but this very well may have happened in transit and not from the distributor.I would still buy again because other than the aforementioned issue, this is still a high quality product with zero issues
Sgtmac
2025-07-02 11:30:15
The fitting were slightly larger than the headset that I'd hoped they'd fit....does fit the helmet rail. Probably fine for airsoft but wouldn't use in the field.All in all they're good for the price with compatible earphones and helmets.
Goon2A
2025-04-26 16:17:52
The mounts work well with Walker Razor muffs. Here are a few tips! 1.) Mount the comtac adapters to the arc rails. 2.) You will need to bend the adapter wires outward slightly to maintain pressure on the Walker Muffs. If you do not do this, they will slide off! I used a small pair of pliers. 3.) Lastly, many people complain about a lack of pressure against the head / A bad seal around your ears. Easy Fix. These mounts are actually adjustable! Press firmly against the wires by the mounting bracket and they actually lock into multiple different positions against the head! They are designed for adjustment. A lot of people do not know this. They worked great with my 3A helmet. Saved me a ton of money to spend on nods.
Sneakysalmon27
2024-12-07 16:39:33
Military guy here. For the money they work well. For walkers specifically they are a good option because the folding arm mounts don’t have a hole in the center to screw into. These solve that issue although you will likely need to get a little creative with rail space since it’s in the middle of the rail you would want for a white light. Small lights will be fine, just a consideration I ran into.
Junkie
2024-11-29 14:54:32
These were extremely loose and pretty much didn’t stay on at all on my Protection Group Denmark helmet with real arc rails. Tried two sets and both were the same spec and too large. They pop in and out and rotate, one set was not stiff enough even when tightened and when rotated backwards would rotate down again with any movement. When popped in, provided some pressure but not nearly the same as legit peltor adaptors. If you’re playing airsoft they’ll be ok as long as you find a way to make them fit your rails. Not sure if they’ll fit the rails Amazon sells or are on the Amazon bump helmets.
Dr. Ironbeard
2024-11-26 09:44:32
Fast shipping - great product!
Recommended Products