Your cart is empty.
Your cart is empty.Double Pulley With Very High Output With Walker. Openable Even When It Is Positioned On The Anchorage, Spin L2 Is A Double Pulley Designed To Simplify The Installation Of Recovery Systems Or Cable Car. Thanks To The Two Pulleys And Mounted In Parallel To The Point Of Additional Attack, The Pulley Allows To Realize Various Types Of Complex Recovery. The Large-Diameter Pulleys On Sealed Ball Bearings Provide Superior Performance, The Maneuvers Are Facilitated, Thanks To The Walker That Allows To Orient The Pulley Under Load And Connect Directly Carabiners, Ropes Or Tapes. Designed To Simplify The Installation Of Recovery Systems Or Cable Car During Work At Height And Rescue: - Opening Triple Action Of The Movable Flange, Quick And Easy, Even With Gloves, - Ability To Install The Rope Holding The Device Connected To The Anchor, - Red Visual Indicator When The Mobile Flange Is Not Blocked, - Specific Design Of The Flanges That Protect The Passage Of The Rope. Optimized Efficiency Ratings: - Pulley Of Large Diameter On Sealed Ball Bearings For Excellent Efficiency, - In Parallel Mounted Pulleys And Additional Point Of Attack To Achieve Various Types Of Complex Recovery. Maneuvers Facilitated: - Walker That Allows To Orient The Pulley Under Load, - Walker That Can Accommodate Up To Three Carabiners, - Walker And Additional Point Of Attack That Allows The Use Of Ropes And Tapes In Order To Facilitate The Maneuvers.
Daniel Yates
2025-09-02 12:13:05
Like almost all of Petzl’s rigging gear the Spin L2 is exceptional quality. I fell in love with the swivel link on the Pro Traxion. I’ve paired this with the Rescucender and the Twin Release progress capture double pulley for hauling our 19 gallon setter’s bucket (fully loaded with big holds) up either on a separate haul line attached to a neighboring belay bar, or the one I’m working from, and it is saving my shoulders so much wear and tear. I’ll set up the line through both pulleys and attach the Rescucender just below my alpine butterfly, with the Twin Release connected to it, with the static line threaded, so when I pull the knot up the upper rigging is already at its high point. From there I start hauling the holds up with a 4:1 advantage pulling down, until I’ve completed the set, and then set the line around the brake (best with a glove) and open the release lever and lower the assembly back to the ground and lower off. I retrieve the Rescucender and Twin Release when I pull the alpine butterfly back down to untie it.I’ve been practicing rescue oriented rigging set ups using different extraction and access point configurations to test shuttling laterally, hauling up on a diagonal with a trolley pulley, and utilizing a Roll-clip, single pulleys with or without progress capture, and transfers between lines - it’s been really cool, and these pulleys feel like they could lift double their rating (not going to try that). Highly recommend.
Josue Guevara
2025-02-21 15:02:46
The best , use this for tree work
Allie Friend
2024-12-16 13:47:34
Got this for aerial dancing and the number of applications of this piece of gear will make possible is huge. We will be able to perform a great number of new stunts, all without compromising safety.
Recommended Products
