Your cart is empty.
Your cart is empty.Product Description
DIGITNOW Phono Turntable Preamp
- DIGITNOW electronic pramplifier stands up to the test and will prvide you with serious sound peformance. it is perfect for bringing your studio equipment's phono-level output to a more suitable and manageable line level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier.
- Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources and instruments alike.
- You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, it is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with this electronic preamplier.
Technical Specs:
- Output Level: 2V
- Reference Voltage: 1V
- Load Impedance: 10K Ohms
- S/N Ratio (with A-WTD): 70 dB
- T.H.D. : 0.08 for 1 KHz 3 mV Input
- Frequency Response:20 Hz ~ 20 KHz ±2dB
- Input Sensitivity 1 Impedance 1 Phono - 3 mV 1 50K Ohms.
Features :
- Converts Phono Signals to Line Level Signals
- Ultra-Low Noise Operation Improves Sound Performance
- Dedicated RCA Connectors
- 12-Volt DC 110V Adaptor Included
Size:
- Dimensions (WxDx H):3.54 "X2.06 "X1.01"
- Weight : 0.35 pounds
Dedicated RCA Connectors
Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs
Clear Sounding Audio
The phono preamp creates smooth equalization for balanced, clear audio. Helps limit distortion and for the best quality sound, make sure to securely plug in all cables.
Unique DC 12V Power Supply
This product uses the latest DC 12V power supply mode, so no longer restricts the application scenarios.
indianajohn
2025-08-25 12:00:40
I’m using this in line with my soundbar’s sub output (which had a very weak signal). It worked nicely to boost the audio signal so the sub now works as it should.We use our soundbar for movies, but often just for streaming music too (Bluetooth, Pandora, etc). Unfortunately, the soundbar’s sub output was super weak.Before, my soundbar’s sub output signal was so weak, it often wouldn’t even turn the subwoofer on (it’s an auto-on subwoofer that powers on when it senses an audio signal). And when it worked, the sub signal was so weak, it sounded like there was no subwoofer at all, even when the subwoofer’s volume was all the way up. You had to get right next to it to even know it was doing anything.Putting this in line between my soundbar’s RCA output and my subwoofer’s RCA input boosted the signal perfectly so I can now hear the subwoofer nicely. The volume knob on the subwoofer now will go from relatively quiet to full dance party mode.I had no issues with the “hum†that others have mentioned. It’s as quiet as can be, and I don’t even have the optional ground wire hooked up. It does have a ground wire connection on it, so connecting that to the chassis of your stereo, turntable, subwoofer, etc, would likely eliminate much of the hum people have mentioned (I’ve had hum issues on my other stereo and a ground wire connecting all the audio components’ chassis together solved it).I’d definitely recommend this if your system is sending a low level signal to another component that just doesn’t have enough uumph to get the audio levels that it should be getting.
michael givens
2025-08-13 10:03:02
Works perfectly and fast shipping and a good price!
wise1
2025-07-20 15:53:55
I have only had this a short time but so far it’s working great with no added noise that I can detect.The purpose of this device is to convert the low level signal from a magnetic phono cartridge to the inputs of a receiver or amplifier or recorder that DOES NOT HAVE a dedicated phono input. Any other use such as connecting it directly to amplified speakers is at your own risk. It has RCA stereo in and out sockets. NO TRS, the Amazon description is wrong but the photo is correct. It also has a ground terminal which should be connected to the turntable to eliminate hum.
G Mack
2025-07-17 15:26:44
Connect to Record Player
The Engineer Critic
2025-07-05 18:01:06
The one I received was defective (channels cut out intermittently) so I immediately returned it. It appeared to have been returned previously by another customer (who perhaps had the same issue).
Ed Reder
2025-06-07 18:07:38
If you experience a low harm like I did, it’s likely due to it not being grounded properly. Make sure you take the small wire from your turntable and attach that wire to the preamp grounding. Screw. Once I did that, the hum disappeared.
DennisJO
2025-03-17 10:34:38
Used this with a vintage Realistic receiver that lacked a built-in phono preamp. Works as expected, no issues whatsoever, I highly recommend it. And what a bargain!
DJ LK 7620
2025-02-14 12:40:22
Works perfect!
Recommended Products
$659.00
$ 99 .00 $99.00