Your cart is empty.
Your cart is empty.Product Description
Air rivet gun
1/4" Air Riveter for Steel, Stainless, Aluminum & More. Wadoy's 1/4-Inch Air Riveter has been a long-standing tool in the industry for many years. Whether it’s to complete a window regulator repair task or to set hundreds of rivets daily in a high-production environment, this air rivet gun with a pulling force of 2,423 pounds has got you covered.
Packing List
- 1 x DOUBLESUN air rivet gun
- 5 x nose piece (3/32", 1/8", 5/32", 3/16" and 1/4" Capacity)
- 3 x assistance tool （ wrench & ring ）
- 2 x sets of jaws (1 set in the cylinder, 1 set for replace)
- 50 x aluminum pop rivets (3/32"*1/4 ,1/8"*3/8",5/32"*1/2" 3/16"*3/4" 1/4*5/8 each 10pcs)
Heavy Duty Air Hydraulic Riveter-Professional Pop Pneumatic Riveting Gun
At typical workshop air pressures, the pneumatic rivet gun provides 2400-2600 pounds of pulling force to effortlessly install stainless steel 1/4" rivet nuts in just a single trigger pull.
EdG
2025-09-03 12:26:24
So far its worked fine. The plastic disposal container presses on the the Rivet Gun with an O-ring Only light usage so far. I put some oil in the container as required-- review the specifications.
Indigogt
2025-07-01 11:34:52
*** Great product, Good price, Fast delivery, Nice seller ***
Dan the Saxman
2025-06-03 17:37:23
After messing with an Astro riveter, the type with the two large handles, and having problems with it, I thought I'd give this unit a try. I should have bought this one from the get-go, and save the aggravation with the Astro unit, not to mention the wasted money. I primarily bought this for 1/4" rivets and I have to say it does the job perfectly. I use 80-90psi and with the 1/4" rivets I have to give it two tries to get the stem broken. Not a problem and it's still super quick as compared to the manual tool Definitely a recommended buy. As others have stated, too bad there's not an instruction booklet with it, but I think as long as you add a few drops of hydraulic fluid before each use, it will continue to give good performance.
George
2025-05-28 16:12:26
This tool worked absolutely amazing for the 3 times I needed to drive about 100-150 rivets. Then the 4th job I was going to use it, I could not get the gun to work. It would not hold pressure, and couldn't get it to drive the rivet. Pretty disappointing as this had become one of my favorite tools to work with.Past my return dates, so I guess I'm out of luck.
Tom
2025-03-11 13:38:59
Works as it should. Fast and consistent! Seems to be well made.
Alan Moore
2025-02-08 13:08:47
I've used this on our converted horse trailer to attach hardware and trim. I ended up buying a new compressor to give it the pull I needed for consistent 90 PSI and it works better than when I first bought it. I had a lot of failed rivets, especially longer rivets and stainless. Aluminum are fine; I've taken it up to ABA 5-6. I probably should have spent a few more dollars on a better brand, but it will only get occasional use. The stems often get stuck as opposed to going through to the rear catcher.
3Pedal
2024-12-27 12:41:05
I just put 300+ stainless rivets into my motorhome rebuilding the upper belt line. Let me tell you, that was a job. I can't imagine doing that job without this tool. I was mostly on a ladder or scaffolding, often reaching out a ways.I learned you need to let it finish cycling between trigger pulls to be most effective. It worked every time. As the catch of the rivet tails started filling up, you needed to watch it a little more to make sure the next one fell in. I think I have a couple that didn't go in and fell out. Not a big deal at all. I expect it to keep using it for the lower belt lines as I work through them. I would not do this job without it.
aaron
2024-11-26 14:35:44
The media could not be loaded.
Recommended Products
$16.79
$ 7 .99 $7.99