Your cart is empty.
Your cart is empty.Product Description
AW2000-02 Air Filter Pressure Regulator
- Air inlet size:1/4 NPT
- Flow:500L/minutes
- Max working pressure:150PSI
- Operating temperature range:32-140°F
- Drain type: Manual
- Body material: Aluminum Alloy
Accessories:
- A pair of Metal Air Coupler & Plug Kit
- 2 x 1/4" NPT Fittings
- 1x Thread Seal Tape
Installation and Operating:
Preparation
All calibrated components shall meet the maximum flow requirements.
To prevent dust from entering the gas path, please clean the port and fitting first.
Note that the port and thread sizes are consistent, and that the airflow direction follows the same path as indicated by the arrow.
Pressure Adjustment
Pull up the pressure gauge knob，
If you turn clockwise, the pressure will rise steadily, otherwise it will fall.
Stop turning and lock the knob downward when the desired index is reached, forget this step you may encounter leakage problem.
Dial to read
Please ensure that the pressure gauge is tightly installed on the main body and pay attention to whether the reading rises or falls smoothly while adjusting pressure.
Drainage
The drainage column will self-excrete when pressure is absent, and it will close as air flows through. Ensuring proper dehumidification, drainage becomes necessary if the water level surpasses the upper limit.
Paul
2025-05-16 14:46:13
I needed to replace the moisture separator/regulator on my sand blaster cabinet and had concerns about maintaining air flow for performance. While my air lines are 1/4", I chose this 3/8" unit to minimize air flow restriction using threaded reducers on the inlet and outlet. Because of it's size I had doubts on the performance, but it proved to be an excellent choice. While the moisture will drain automatically when the air pressure is zeroed, I like that I can periodically blow out the moisture manually during operation. For the price this unit exceeded my expectations.
Jeff Warner
2025-03-17 13:36:50
I got this to filter the air on my big compressor. We live in an area where the humidity can be on the higher side and that translates into more moisture in the compressed air I’m using. This is a nice filter. They include the necessary fittings for installing it. I like the purge/drain valve at the base. The pressure gauge appears to be on target with its reading. I’m looking forward to using this on my next paint job.
AJ
2024-12-30 18:52:35
Works well, used to replace regulator in tire machine, so far works as original.No notable annoyances or failures noted
Recommended Products