Your cart is empty.
Your cart is empty.Product Description
Pack of 2 T92P7D22-12 Relay
RELAY GEN PURPOSE DPST 30A 12V
Mounting Type：Chassis Mount
Coil Voltage：12VDC
Contact Form：DPST-NO (2 Form A)
Contact Rating (Current)：30 A
Switching Voltage：600VAC - Max
Load - Max Switching：18000VA
Coil Current：140 mA
Coil Type：Non Latching
- Termination Style：Quick Connect - 0.250" (6.3mm)
- Coil Insulation：Class F
- Must Operate Voltage：9 VDC
- Must Release Voltage：1.2 VDC
- Operate Time：15 ms
- Release Time：15 ms
- Operating Temperature：-55°C ~ 85°C
- Contact Material：Silver Cadmium Oxide (AgCdO)
30A 12V STANDARD RELAY
The T92P7D22-12 Standard 12V 30A Power Relay offers a reliable solution for high power applications. Whether you need to control HVAC systems, residential or commercial appliances, or industrial controls, this relay provides dependable capabilities.
EASY INSTALL
6-pin relays can be installed directly to replace older relays, simplifying the design and maintenance of custom wiring jobs.
HIGHER QUALITY
Casalytics has been deeply involved in relays for many years and is committed to providing customers with standard, high quality relays!
Esteban Gomez
2025-08-16 15:03:06
One of them burned out, but I think it was because I accidentally wired the connections wrong but the second one worked really well. Just make sure you’re Connecting them right.
tim
2025-06-26 11:13:56
I bought these by the numbers and installed it first time using it blew the whole side out. I double checked the wiring from a picture I took before removing the old one and it was correct. I ordered one locally and it works great.
Bob
2025-06-15 16:14:04
This is the type of general purpose relay that is used in lots of industrial equipment, such as kilns or any other equipment requiring the ability to switch 240 volts at up to 30 amps. All mechanical relays wear out eventually, so it's always a good idea to have spares on hand. They are easy to swap out when necessary by just slipping the spade connectors off of the old relays and onto the same pins of the new ones. I replace the relays in my kilns routinely as a preventative maintenance measure.
TB
2025-01-14 13:14:27
This is a nice pair of relays. I confirmed that 9-12vdc will trip the coil and the contacts (2) N.O., are rated for line voltage and 1-3 HP motors. Nice Find. I use these along with contactors to control heavy equipment in my wood shop.Cheers
Recommended Products