Your cart is empty.
Your cart is empty.U-bolts feature machine threading on both arms and are designed to be inserted into two pre-drilled holes. They are primarily used to anchor cylindrical objects such as pipe, conduit, cable, tubing, round bar or rope. In some applications, U-bolts may be inserted into wet concrete with the threaded arms pointing up. Once the concrete sets around the "U" shaped end, the U-bolt will be firmly anchored into place and the protruding threaded tips can be used to attach objects to the concrete.
D. Agnew
2025-08-03 17:19:04
If you want to print a Firebolt lower and are in search of the U-bolt for the buffer this is what you need. I used a Dremel to remove a little material from the inside and the outside top of the U to allow for the buffer tube threads and charge handle to clear.
Chris B
2025-05-11 17:23:16
Honest Review : Accurate size and durable.Worked great with no problems. Very strong.
Don
2025-04-21 14:48:44
Ok
alfred quist
2025-02-27 21:22:27
Perfect size for 3/4" pipe
Bronik
2025-02-22 10:16:57
Used to repair some patio furniture chairs and they did the trick. Straight up good deal for the money
Wildlife
2025-01-26 12:43:39
Good U clamp for the shop to keep on hand.
DM
2025-01-09 17:22:53
Did not fit 3/4" pipe as advertised. Had to heat and re-bend to make fit. Heating removed zink coating. Not very happy with u-bolts.
Deborah T.
2024-11-28 16:43:53
This part number is advertised as 1 1/8 inch. UBolts are measured inside to inside. These measure 15/16 opening at the threaded ends. Would have to be bent to open up to 1 1/8
Melted
2024-11-22 14:18:14
These will indeed fit over 3/4" pipe which measures about 1-1/16 inches OD. They are what is described a light U-bolt but perfect for my project.
Recommended Products
