Your cart is empty.
Your cart is empty.Product Description
PARTYSAVING Pro Series X
makes the perfect addition to any musician’s collection. Made of durable iron, this keyboard boasts a maximum weight capacity of 135lbs. Non-slip rubber end caps on the feet keep the stand in place and prevents it from sliding during use. Rubber end guards on the second tier keep your keyboard safely in place, while the bottom tier has two locking straps to prevent your keyboard from falling off. Slim folding design folds flat making it convenient for storage and travel.
Specifications:
- Locking safety straps - Light-weight - Material: Iron - Max weight: 135lbs - Height range: 29” – 40.75” - Width: 14.5" - 27.5" - Color: Black
Folds Flat
Keyboard stand features a slim body that is capable of conveniently folding to a flat position, making it great for tucking.
Dual Post Legs
Stand features an a double layered leg design for super strength and durability.
Locking Sraps
Convenient locking straps can be used with most standard sized keyboards. Straps attach to your keyboard to secure it to the stand.
oyobass
2025-09-03 17:02:50
Assembly took only a few minutes. Instructions however didn't match the photo on the front of instructions. No biggie, it works and it works well.Top tier is too wide at it's narrowest to securely support my laptop, so I used a piece of oak plank to bridge the gap. Problem solved!Durability is still a question, with this being lightweight. Welds look sturdy but smaller than optimal. Time will tell.I'm mainly a bass and guitar player and just play keys occasionally at church, so this should be perfect.
Eric W
2025-08-14 14:32:06
For what I paid this is perfect for me. I can play standing or sitting. No rocking issues. I have a wk-7600 on top and ypg-235 at the bottom. I don't plan to move it much. Took me about 1 hour to assemble because I wasn't reading instructions.
Steven Hartwell
2025-07-17 16:53:42
This PARTYSAVING Pro Series Adjustable X Style Piano Keyboard Heavy Duty keyboard stand is quite sturdy if you are using a synthesizer or stage keyboard that is less than 35 pounds realistically.The stand is well braced with the double Z pattern type design and the more simple, but dependable, 'peg through hole' design for the height adjustment is solid.Even with its double braced design, the stand is still very light for a 'heavy duty' stand and is a nice balance of portability and durability. If you have a weighted 88 note keyboard that needs to be fairly low to the ground and you sit to play, you may want to look at the more professional offerings from Ultimate Support and On Stage as these are built to take the weight and the height easily but be prepared to spend 4 to 5 times more for it.For the cost, this is a good compromise of weight and steadiness while still providing support, especially for standing keyboard players.
Pat Shumway
2025-06-04 12:22:14
This stand is exactly what I needed ! I play mountain (lap) dulcimer but can't sit longer than an hour without having pain in my hips and lower back. I've been looking for something that would hold my dulcimer while I stand to play. Stands made specifically for this purpose run in the $200 range. I'm thrilled with my $30 keyboard stand and its adaptability for my use ! I took the top from a music stand and laid it on the top shelf to hold my music. It fits perfectly, and it's just the right height! I used the keyboard straps to secure the shoulder strap, but likely will come up with something else.The stand arrived on time, with all parts, and in perfect condition. It is stable but lightweight.
Dzilizi
2025-05-25 17:06:56
So I got this to hold an m-audio 88 keystation and my Launchkey 49.Once put together it is very study. The keyboards sat on it with no problems. It seems to be fairly well made. You do have to make sure you are putting it together correctly. I had to take it apart and reassemble it the first time because the parts will almost match if they are backwards, but then one will always be off.And once it is together, it is a little bit of a pain to take it apart. But that is not a problem for me.
Corey Warren
2025-05-09 16:08:19
I love this thing like you wouldn't believe. Many gigs and counting. It fits in an airport 73-key keyboard metal case (just have to remove the feet and put them into a little cream cheese container). Great product. Thanks for this, seriously.
Dean Marconi
2025-03-01 18:38:33
The media could not be loaded.
Customer
2025-02-17 10:29:30
I love it, but have only one small issue with it....I have an Oxygen 49 midi keyboard, and it is just a tad too small to fit on top without having the stand just a little too high.Despite that, I have found a position I can work with while sitting down, and the rubber grips on top sure do keep it secure for what I am doing.
Cross
2024-12-30 14:31:04
Easy to assemble. And serves its purpose
Recommended Products