Your cart is empty.
Your cart is empty.Polyurethane based suspension, driveline and chassis components have been designed as an upgrade to the soft factory rubber components.
Luca P.
2025-09-04 20:06:05
Perfect fit for the upper control arm rear on Honda Prelude 1988.Delivery was on time, excellent service. The bushings are high quality and easy to press in. You might need more grease than the amount in the package, if you really want to cover both sides.One package contains enough bushings to do both rear upper control arms.
Liam Sullivan
2025-08-04 14:05:43
Much better quality and easier to install than OEM Honda bushings!
YotaTekk
2025-07-15 11:06:02
Work great. Really makes the front end feel solid. Grease well.
Shamir Polanco
2025-04-20 14:13:16
i had no problem installing these on my Honda accord 96 coupe. just had to pop out the old bushing with a press and slide these ones in.best recommend use a heavy duty industrial grease than the one provided. to make sure it does not squeak.
SliCxRiC
2025-04-11 16:31:22
These bushings are too large to fit in the front upper control arm mounts. Bushing is a larger diameter than what comes on the car.
mark
2025-03-20 14:28:31
Work perfectly
anthony caraballo
2025-01-02 11:32:35
I love the prothane
Sean T.
2024-12-25 21:19:56
Direct replacement for 88-91 Honda Prelude Upper Control Arm Bushings - Prothane 8-213 Red Front Upper Control Arm Bushing Kit. You will need two pairs per side (Front and Rear) to complete the replacement. Also you will need fender washers since the bushing is aftermarket and not bonded to a metal sleeve like the factory.Also for those who don't understand automechanics, you have to press out the original bushings with the metal sleeves.Most people make the mistake that the bushings are too big, but in fact are perfectly sized too finger press in.So in order to properly install these, you must press out the originals with a press or a something like a ball joints press, and then you can install these bushings by hand.
Recommended Products