Your cart is empty.
Your cart is empty.Product Description
Perfectly straight cuts. The micro-adjustable, precise and stable longitudinal stop provides decisive advantages: Corrections even smaller than 0.004" (1/10mm) can be made after coarse adjustment using an adjusting screw. The height is adjustable and 45 degrees tiltable saw blade makes it possible to cut double mitres when used together with the angle stop. Low-noise drive using DC special motor with compound belt driver. Ball-bearinged saw blade shaft. Tungsten tipped saw blade diameter 80mm (3 9/64") x 1.6mm (1/16") x 10mm (13/32") (36 T). Additional work piece pusher and non-slotted ABS sawing gap cover for tight tolerances between saw blade and table. Technical data: 110 - 120V AC. 60Hz. 7,000rpm. Mitre infinitely adjustable up to 45 degrees. Table size 12" x 12" (300 x 300mm). Cutting depth 0.04 - 5/6" (1 - 22mm). Saw blades between 2 - 3 11/32" (50 - 85mm) can be used (with 13/32" (10mm) centre hole). Weight approx. 12 lb (6kg).
From the Manufacturer
Proxxon 37070 3-11/32-Inch Table Saw engineered in Germany for perfectly straight cuts. The ideal machine for model building, picture framing, doll houses, birdhouses and other intricate projects such as fine mechanics, mold construction, toy manufacture, architects, model carpenters and fitters. The Proxxon 37070 has many features for the precision craftsman. Adjustable setting stop/fence has setting screw for five adjustments of longitudinal stop by 0.004-Inches 1/10 millimeter for very precise cuts. Blade angle may be adjusted from 0 to 45 degrees for miter cuts. Blade may also be raised or lowered to accommodate the optimum height for various materials being cut. Double miter cuts are possible when height adjustment and 45 degree tiltable saw blade are used together with angle stop. Low noise drive using DC special motor with compound belt driver. Ball bearing saw blade shaft. Tungsten carbide tipped saw blade comes with saw. Size 3-9/64-Inch diameter x 1/16-Inch wide kerf, 24 tooth blade is good for general purpose cuts with wood, non-ferrous metals, plastics, Plexiglass, fiberglass foam and other materials. Stable and sturdy construction because load bearing parts and plane milled table are made of die cast aluminum. Extendable table extension with integrated auxiliary stop provides for very accurate cuts of larger materials. Meter gauge comes with angle stop rail of aluminum and an adjustable limit stop for manufacturing parts of equal length and the same angle. Adjustable meter runs in milled slot in table top for precision accuracy. Vacuum cleaner adapter permits clean working. Technical Data: 110-120 Volt AC 60Hz, 7000 RPM. Miter infinitely adjusts up to 45 degrees. Table size is 12 x 12-Inches or 300 x 300 millimeters. Cutting depth 0.04 - 5/16-Inch (1 - 22 millimeter). Saw blades arbor is 13/32-Inch or 10 millimeter.
treat
2025-08-29 18:12:20
This is a lightweight, small saw. It cuts up to 1 inch. There's no apparent advantage over a regular sized saw - other than saving some space. The table and saw assembly are solid and precise. The motor is adequate for the size. The included utensils are not accurate.Let me explain the shortcomings and how to fix them.The fence assembly was off by 1 degree (bent back into shape easily). The fence has two fastening mechanisms, a screw and a clamp. The screw is useless (off by a few degrees and not repeatable). The clamp is better, but still not precise enough for rip cuts. I built a custom fence and am happy now.The attached measuring scale is useless and mostly in the way. I'll take it off. The miter gauge is too short and loose. I had to replace it with a different one.The protective plastic cover does not open far enough and makes measurements with calipers or rules difficult. I'll take it off.To sum it all up, the Proxxon product design team delivered a failure, because all included tools are subpar, cheap and useless. Luckily the engineering team delivered a success, because the table & saw is precise, sturdy and accurate well below 1/100 inch. And that is what matters in the end.
Dale
2025-08-27 13:35:46
I purchased this with a .20 blade and it works great for frets slots. Does not bog down at all and can cut slots on hardwood necks in no time compared to a long time cutting by hand.
Tanju E.
2025-08-23 13:32:45
Well built amazingly accurate. Easy to use and powerful, could cut paper thin strips easily.
Donald R.
2025-07-21 18:59:00
Positives: Solidly built, great torque, (mostly) great attention to detail, a (mostly) well thought out design. I’ve owned other micro saws and this is by far the best.Two Drawbacks: The indexing scale on the front is either of poor design or just over my head. Either way, I find it nearly useless. This doesn’t bother me however, as I prefer manually measuring and setting the fence anyway. Speaking of the fence…the only real flaw in the unit is that the fence comes out of true (not perpendicular unless very careful when locking it down, and this seems to be because the locking mechanism isn’t quite centered properly. Still, this is easily overcome if careful.Overall, I am very impressed with the unit and consider it well worth the premium cost over others I’ve tried.
Jerry Foote
2025-07-15 16:25:18
I'm an experienced woodworker and I was unable to get a square cut when using the miter gauge/fence. I contacted the company and they sent me a new one and I'm having the same problem. After several attempts to adjust the new gauge and still not able to get a square cut, I tried the same cut on my Dewalt compound miter saw and got a perfectly square cut, After trying the new gauge after receiving it today I was going to return the saw and found out the window for return expired yesterday. I thought this would be a great saw for building butcher block cutting boards and table tops but without being able to get accurate cuts I do not recommend buying this saw.
Mary Ann B
2025-05-26 14:27:47
Great saw for my uses. Much more precise than my last miniature saw.
Makanalani
2025-05-07 14:54:45
Saw blade not parallel to fence. Miter gauge wobbly in track. Blade cover cap not flush with table (narrow pieces get hung up on table).
Gerald R. McGowan
2025-04-29 10:29:35
This saw has the limitations with the miter gauge as mentioned. It is, however a good saw for working with small pieces of wood. I rip .90" thick hard maple and ebony into 3/16-5/16" strips easily. However, the blade is likely to start oscillating if you feed too fast with wood this thick and cut groves into the side of the pieces. It works better to set the blade to 1/2 the thickness of the wood and make 2 cuts, turning the wood over for the second pass. This is a limitation of the thin blade, not the saw. Quite a powerful motor.The rip fence works well, but does not move in quite the .004" intervals regularly. You have to make a cut then try and ease into a width. It simply does not clamp totally consistently. Stable when clamped though.The miter gauge works very well, as does the shop vac inlet. Still throws around a little saw dust, but much better than without the vacuum.Overall, i would rather have the Byrnes saw, but that is several hundred $ more and does not tilt. This saw is worth the price because of what it can do. Too bad they didn't make the fence a little longer and better.
fortkentdad
2025-03-14 14:29:57
Model workers dream. I am a model railroader and this is a nice to have tool. Been using if for a few months and it does the job very well. No regrets. It is a luxury saw, but well made. Blades prices seem to fluctuate a lot.
Cesar Javier Carmona cuellar
2025-03-06 18:38:38
de lo mejor que he ocmprado de Proxxon, esta marca alemana combina detalles excelentes para sus productos, tengo granb parte de sus diseños de herramientas para un taller de lauderia y es una belleza trabajar con estos productos, excelnte calidad y my recoemndados, vale su precio y comprar aqui es incluso mas economico que comprarlo directo en proxxon o en tindas en USA.
Patrick Gendron
2025-01-30 16:30:59
Meilleur achat pour miniature
Felipe E B.
2024-12-28 12:16:10
Excelente producto para lo que fue diseñado, viene con varios accesorios muy utiles. Buen empacada y aparte a un super precio. Los cortes de la madera son finos y limpios. Recomiendo ver en internet mejoras recomendadas a la maquina ya q tiene algunos detalles de diaeño q se pueden mejoras facilmente
Ignacio martinez
2024-12-07 18:18:19
Me ha sido muy util, muy buena calidad de producto, me dedico al modelismo y esta herramienta es excelente, la recomiendo ampliamente, muy buenos acabados, los cortes muy buenos, facil, practica y comoda.
Recommended Products
