Your cart is empty.
Your cart is empty.Product Description
Punch Down Impact Tool with 110 and 66 Blades, Network Wire Cable Cat6/Cat5e Telephone Impact Terminal Insertion Tools
Double cutter head design, cut the excess cables while punching down. Precise blades are interchangeable and reversible between 110 and 66 standard
With spare storage that helps prevent blade loss, the precision blades are conveniently interchangeable and reversible between 110 and 66 blades.
Adjustable impact-force settings (LO/HI) for various cable termination applications, a handy hole in the bottom to store an extra blade.
With 110 and 66 blades that are interchangeable and reversible, the professional punch down tool can inserts and cuts terminations in one operation.
This handy 110 type punch-down impact tool is spring-loaded for connecting blocks and keystone jacks. The twist and lock socket accommodates 110 or other common blades.
The impact adjustment dial adjusts the force of the spring-action from low to high to meet different installation applications
110 and 66 Punch Down Tool
- Multi-Function Hook Tool can easily pull the cable out of the tool, and it can also easily hook out excess cable.
- .Terminal Insertion Knife can be used as pressure tool & flated screwdriver .
For Cat6a /Cat6 /Cat5e /Cat5 Network Cable
- Inserts and cuts terminations in one simple operation for Cat6a /Cat6 /Cat5e /Cat5 Network Cable.
- Sharp knife edge and fast punch down.
For Telephone Socket, CAT5e Faceplate or Patch Panel
- Install Wires Easily into the Telephone Socket, CAT5e Faceplate or Patch Panel.
- Cutting & punching down are carried out at the same time.
- Suitabale for telephone and computer network installation and maintenance.
The extra wire stripper makes wire cutting more convenient
With 110 and 66 blades that are interchangeable and reversible, the professional punch down tool can inserts and cuts terminations in one operation.
Package Includes:
1 x Punch Down Tool
2 x Blades
1 x Wire Stripper
Note:
Adjustable impact-force settings (Lo/Hi) can be used for various cable termination applications. If after used a while the entry of the blaze is loose, you can use the impact- force settings to adjust it. (This also means that when it is not loose, the setting is not adjustable.)
Jeremiah D. Ostrosky Sr.
2025-08-26 13:09:46
Just bought this to replace the Leviton branded punch-down tool I used to own, but lost recently. I must say, that this is basically the EXACT same tool, except it has the little wirepuller & flat blade pull outs on the sides. It makes good terminations, and the impact feature is always nice to have, though I tend to only use it on the Low setting. By the way, this cost me approximately 1/3rd of the price of my Leviton tool and performs JUST AS WELL.
Chris R
2025-08-24 10:45:16
I just had one junction box to do, and I didn't want to spend a lot of money, but I wanted to do it right. This punchdown did a great job connecting and cutting the excess off. I only had to redo one wire, which was easy with the built-in hook. The bit stays firm in place but is very easy to remove. I'd still use this if I were semi professional or doing a big project.
Dean Archer
2025-07-12 16:32:56
So at the end of the day the tool works and has a gDecent quality to it however there are a couple of flaws to the design compared to other manufacturers.1) The blade sits in the tool parallel with the tool and not perpendicular like traditional punch down tools.2) Both sides of the tool are labeled with “cut†however because of the way the blade sits in the tool, neither of those sides actually cut.Other than these 2 items, the tool worked great.
Scott
2025-07-03 13:33:01
Works great! Great price for a punch tool
Mark Pankhurst
2025-07-01 19:43:28
Nice smooth operation
Connie Harrison
2025-05-29 15:45:59
Easy to use when running cat 5 / 6
greg ichikaway
2025-05-25 18:00:57
For the price this is as good as a pro tool from what I can tell. I haven't used it much so I ll update again if it shows and bad premature ware. Blades look to be good quality and the blades are 10 dollars by them selves so this is a great bargain.I lost my 66 blades and needed a nother blade but found this for 17 dollars and got both blades and the handle as well. This one even comes with a wire pick where some don't
Martin Vasquez
2025-05-08 18:55:02
It's a punch tool it works great!
Alberta-Ham
2025-04-25 18:13:36
I only have the need to punch down cabling around the house and for friends and family occasionally and this lower-cost punch-down tool fits the bill perfectly.
Josef Brecka
2025-03-09 15:30:37
The tool does not come with 2 blades but only 1. It also did not include the wire stripper as shown. So the description of this package is quite misleading. The punch down tool seems to work ok, but only time will tell.
Anon-anon
2025-02-04 09:25:43
Unable to set the tension, tool just spins back down to low impact.The tool does not come with 2 blades but only 1, so the description & photo of this kit is misleading.The punch down tool only works by pushing hard after low impact and moving handle in 360º degrees to ensure wires actually get pushed into place.
Graham
2025-02-03 18:07:19
Good tool works great
Adam T.
2025-01-31 21:25:22
Only used it once but works great!!!
Recommended Products
$22.88
$ 10 .99 $10.99