Your cart is empty.
Your cart is empty.Product Description
Tintsabo PVC Spigot Rain Barre Faucet Kit
We have received a lot of friendly feedback from our customers and know that many of them need to install two rainwater-receiving barrels at the same time.
You can use it with our rainwater harvesting system and use 2 rain barrels to collect rainwater at the same time, it can also be applied to your tank, aquarium, bathtub, or swimming pool.
Tintsabo Rain Barrel Diverter Complementary Accessories
Sturdy PVC material with, good sealing, not easy to leak, easy to install. Temperature range is from 40 to 140 °F
Max pressure is 150 PSI
Requires 1.6 inch hole saw or spade bit.
Package include:
1 x PVC ball valve
1 x PVC bulkhead fitting adapter
1 x PVC hose adapter
Eddys3
2025-09-04 10:34:12
I installed this in my Emergency water barrel so I could drain it to either change the water or use the water. It was easy to install and didn't leak.
Sodapop
2025-08-19 15:55:47
Seals well, opens and closes easy no leaks
Linda Bennett
2025-08-13 15:05:30
This valve makes it easy to turn a rubber garbage an into a water collection tank. It helps us reduce washout from our gutter system.
J. Williams
2025-06-29 13:22:36
Exactly as advertised. Was able to install in just a few minutes, and have not seen any leaks now after a month or so of being installed. This unit works really well for me as we are near saltwater and the typical models you see made of brass simply corrode too fast. The valve functions exactly as it should and the included nipple is the correct size for a standard hose to thread on.
Robert Jackson
2025-04-11 15:31:56
This PVC rain barrel valve works well enough. To install it you will need to buy a drill bit, otherwise it is very easy to install. The turning of the handle has a nice stiff feeling to it and it doesn't leak... yet. I hope it keeps working and not leaking in the future. I haven't had much experience with non metal valves yet.
ThatOneGuy
2025-04-07 12:37:31
This is a perfect connector for my rain barrel setup. It allows me to shut off the flow between multiple containers without having to do too much work. it is easy to install and seals well, but you definitely need to use thread tape to make sure it won't leak. It appears to be of good quality and so far has been very durable.
Customer
2025-03-23 16:55:50
I am working on putting spigots on plastic barrelsto make my own rain barrels and this works great. Theyhave a nice soft plastic washer for the inner side to helpkeep them from leaking. I also use silicone caulk for theoutter side. The turn off/on spigot is quite stiff to turn,but I think if you turn it on and off about 25 timesto get it loosened up a bit, before you put it on thebarrel,,,it will work better .. for if you stress the spigot toomuch, it will tend to leak...around the part where it screwsinto the barrel ..I have had that happen.. But it is wellmade and strong and should l last a long time :)
Ettoille
2025-01-05 17:28:30
This was a bit larger than I was expecting, but is still well suited for rain barrels. However, I am using it to connect two large storage containers to store water for watering my hanging and potted plants. I'm using a solar powered drip system which pulls water from containers and distributes it via small tubes to my plants. So this valve served my purposes well.
Recommended Products
$39.90
$ 20 .99 $20.99