Your cart is empty.
Your cart is empty.
Guitar Bridge for Acoustic
100% Natural Rosewood
Wood- Ebony (NATURAL)
Length- 152mm, Body wide -30mm, Body heigt- 9 mm, Saddle Slot Thickness - 3mm
This Guitar Bridge Also For Most Acoustic Guitars
Joel Mehic-Parker
2025-05-24 16:43:12
This is a good bridge for an off-the-shelf product. The CNC work on it is clean (I'm assuming it was CNC, that is), and there aren't any noticeable flaws with the bridge upon inspection. I really like he shape, especially the offset pyramids on the sides. That's, of course, personal preference, so take it with a grain of salt.It's definitely a good idea to clean the gluing surface with acetone (I sanded mine as well, to be sure there wasn't any residue from the finish or oils as well). The pin holes are well-spaced and the saddle slot is, for the most part, flat and even throughout. It's a good idea to make sure to check the slot with calipers before making a saddle to fit, evening out any inconsistencies on the bridge side will be easier/longer lasting than having to shape the saddle to fit the intricacies of the slot.The edges of the bridge were certainly sharp, but that's to be expected from any production-line product in this price range. I used a razor blade to soften the edges where my hand would touch when playing. It didn't take much effort and now the bridge feels great.Overall, I'm happy with the bridge. I like the shape a lot and the wood seems to be of good quality. Mine was clearly quarter-sawn as well, which is my preference for acoustic bridges. I can't say they'll all be that way, but I'm certainly going to order from them again if I need another pyramid bridge.
Ben Jenkins
2025-04-26 18:20:18
Quality of material and CNC work is not bad, and price is killer. Biggest issue is the holes for the string pegs are cut all goofy and wonky on mine. Ordered a second one to see if this was just a fluke. Will update review once it arrives.
Customer
2025-04-20 14:24:40
Whoever designed this was a bit off with dimensions and the pyramid shape. It could be useful in some instances, but is not a direct replacement for Martin in terms of size or quality.
SS
2025-03-28 16:28:07
This bridge was perfect for me. As other reviews have mentioned, the bridge is a bit wider than the standard Martin 00 bridge, it is about 1.25 inches wide rather than an inch. My original bridge was 1.125 inches wide (also wider than the standard Martin bridge) so the additional width was helpful, it installed completely over the original space leaving no marks. What is important to know is the bridge slot is a full 1/8 inch (about 4mm) which is wider than the standard Marin 00 bridge (3mm). But that was the size of my pickup and saddle so what I thought would be a hard job of adjusting the slot width to accommodate the pickup was trivial, no adjustment needed!! Nice looking bridge too. If it fits it is a great bridge at a great price. But measure carefully, length, width, height and slot width to see if it will work for your guitar.
Samuel M.
2025-01-01 17:58:22
I like it and it worked out well. Should have sanded a bit more off bottom. To allow for the action in the neck
Gary Williams
2024-11-19 10:41:42
The order was initially misplaced in the shipping process but was sent another one very quickly. The bridge itself is great, correct spacing and polished ready to install, very much satisfied with it and plan to buy again.
Recommended Products
