Your cart is empty.
Your cart is empty.Product Description
Q series wireless industrial remote control,
- The receiver can automatically search for the transmitter channel function, and the replacement of the transmitter does not need professional equipment pairing.;
- Multiple safety protection design, over 4.3 billion never-repeat safety codes, fault self-diagnosis and automatic frequency locking tracking;
- Synchronous encoding and decoding data transmission technology, with software to eliminate interference, debug and correct functions;
- The operating distance is 100 m (the computer software can adjust the maximum 500 m) ;
- Low power consumption design: it can be used for 200 hours with two No.5 batteries
Noted:
The remote control needs to be used with the contactor. It cannot be directly connected to a power source. Connecting the power directly will burn the motherboard.
High quality circuit board
- Antenna built-in,360 degree barrier-free remote control;
- The application of programmed functions and parameters can be used by computer interface to change the required function settings;
- Effectively press up to 10 million buttons
- The circuit board is coated with conformal paint，
Unbreakable case
- Safe, simple and efficient industrial grade PA shell, impact-resistant, waterproof and oil-proof;
- Complete compliance with IP66/NEMA international standards;.
Strong outer packaging
- The product is packed in carton with foam cushioning material to prevent collision during transportation.
Reinforced shell plus protective case
- Soft silicone material can maximize the protection of your remote control
- Corrosion resistant material
Button stickers
- PVC material
- Multiple patterns and colors to choose
Quality cable with copper wire
- 1.3M long and 0.75mm diameter copper core industrial cable
- All cables are numbered,easy connection
North Central Construction
2025-06-21 12:45:40
Easy to install, Inexpensive solution.
Firefighter355
2025-06-07 12:51:38
I purchased this as an alternate option for a wireless remote control system on my Car Trailer to run the tilt bed and the winch and an accessory set of lights. Does all of that well I only complaint is I would really like to see some different button indicator markers. II purchased this as an alternate option for a wireless remote control system on my Car Trailer to run the tilt bed and the winch and an accessory set of lights. Does all of that well I only complaint is I would really like to see some different button indicator markers I know it send you a set of Labels, but they don’t really fit my needs. I have reached out to the company and they just keep telling me it comes to replacement or any information how to obtain the ones with the words I would like on them other than that works good
Customer
2025-04-22 15:43:02
Remote works as it should! very happy with it. i put it on an IMT 2020 crane. like the other review said. power 1 and "com 3" is 12 volt power and power 2 is your negative. and 4 goes hot so make sure to cover it up. but then you just wire up the other numbers to your corresponding controls.
shantel
2025-04-06 13:49:20
Works great, easy to wire up. I had a problem with a control board inside coming loose and breaking some solder joints. I was able to fix myself but it was annoying. For the price I expect it to be built a little cheap so I can't complain to much
Horns n Thorns
2025-02-14 17:32:29
I rigged this up to a Liftmoore Auto Crane. I gutted all the safety stuff from the crane to make wiring simple.On this remote lead 1 and 3 are hooked to 12v positive and lead 2 to negative. When you turn on the remote then lead 4 becomes hot with 12v+. Then pushing each of the respective buttons makes that lead hot.All of the buttons are momentary, wish bottom two would lock on, then they could be used for lights or something.There are what I will call 4 pairs of buttons, take the top two, the up and down function, they are a pair. You can only activate one at a time. While it is physically possible to push both buttons, if you do electrically the first button that was pushed will be disabled when its pair is also pushed. So, you can't try and go up and down at the same time. The applies for all 4 rows of buttons. However you can perform multiple functions at the same time, like cable up and boom up at the same time. As long as you don't push two pairs of buttons at the same time.Inside the control box there are already the two fuses you need, so just wire it up. There are also LEDs inside that light up when you push the buttons, will help with trouble shooting if ever needed. There are also small clicks that come from control box when buttons are pushed. The transmitter itself makes no noise, it has a light that flashes red or green, Green flashing when buttons are pushed is normal.There is no lengthy start up sequence. Just disable the red stop button with a twist and then hit the green button. Its ready to work now.
Mary G
2025-02-04 10:36:21
Husband found the wiring was easy to understand, and it's working well for him.
Recommended Products