Your cart is empty.
Your cart is empty.Quality Chemical Q-Cote is a paraffin-based concrete form release agent that ensures beautiful, consistent results. This easy to use product helps create unique paths and shapes with minimal effort. The 1 gallon size is perfect for DIY projects, special molds, or larger required forms. Q-Cote provides superior protection from sticking and staining when used as a concrete mold release agent on stamped concrete molds or other forms of decorative concrete molds and forms. With Quality Chemical Q-Cote you can be sure your project will turn out looking great!
JBru
2025-08-27 15:00:20
I pourde a capstone directly onto plywood along with wood forms. The capstone released super easy from the forms and with a little nudge from the pmywood base. Also worked great in the concrete mixer. The concrete just slid out and the equipment cleaned super easy.
NC
2025-06-15 10:21:14
I poured a monolithic slab and used this on the wood. The planks pulled right off!! Highly recommended!
ozark
2025-05-25 11:43:36
We used this for some wood forms we used to make our concrete hearth. We did two coats with this and the wood frame came off easily. The only drawback is the smell! We poured the hearth in place so I needed to treat the wood frame with this inside the house. WOW, I had to open up all the doors in the middle of winter to air out the house because the chemical smell was so strong. So, just be warned. Use it outside if at all possible. Otherwise , it worked perfectly.
TJ
2025-05-07 15:55:56
I used to struggle getting my cement castings to release from a plastic mold. I started using this product and my castings now release with very little effort. Also makes cleaning between castings a breeze. Little or no cement residue left on mold.
Tony Atkinson
2025-03-28 15:09:50
Didn’t need a 5 gallon pail 1 gallon was enough worked like it was suppose to as a release agent for concrete.
Mr He
2025-03-16 09:38:17
It worked a little.but it doesn't separate the concrete statue from the mold well. It broken my concrete foo dog. Not recommend use it for concrete statue.
Jim
2025-02-06 17:58:29
I recommend using for the plastic molds the mold will last a lot longer.
Mikel Lopez
2025-02-04 10:36:02
It didn’t work how expected, concrete didn’t separate from the molding
Recommended Products
